Filtered by vendor Redhat
Subscriptions
Filtered by product Satellite Capsule
Subscriptions
Total
282 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2016-1000341 | 3 Bouncycastle, Debian, Redhat | 5 Bc-java, Debian Linux, Jboss Fuse and 2 more | 2025-05-12 | N/A |
| In the Bouncy Castle JCE Provider version 1.55 and earlier DSA signature generation is vulnerable to timing attack. Where timings can be closely observed for the generation of signatures, the lack of blinding in 1.55, or earlier, may allow an attacker to gain information about the signature's k value and ultimately the private value as well. | ||||
| CVE-2016-1000339 | 3 Bouncycastle, Debian, Redhat | 5 Bc-java, Debian Linux, Jboss Fuse and 2 more | 2025-05-12 | N/A |
| In the Bouncy Castle JCE Provider version 1.55 and earlier the primary engine class used for AES was AESFastEngine. Due to the highly table driven approach used in the algorithm it turns out that if the data channel on the CPU can be monitored the lookup table accesses are sufficient to leak information on the AES key being used. There was also a leak in AESEngine although it was substantially less. AESEngine has been modified to remove any signs of leakage (testing carried out on Intel X86-64) and is now the primary AES class for the BC JCE provider from 1.56. Use of AESFastEngine is now only recommended where otherwise deemed appropriate. | ||||
| CVE-2016-1000345 | 3 Bouncycastle, Debian, Redhat | 5 Bc-java, Debian Linux, Jboss Fuse and 2 more | 2025-05-12 | N/A |
| In the Bouncy Castle JCE Provider version 1.55 and earlier the DHIES/ECIES CBC mode vulnerable to padding oracle attack. For BC 1.55 and older, in an environment where timings can be easily observed, it is possible with enough observations to identify when the decryption is failing due to padding. | ||||
| CVE-2018-5382 | 2 Bouncycastle, Redhat | 3 Bc-java, Satellite, Satellite Capsule | 2025-05-12 | 4.4 Medium |
| The default BKS keystore use an HMAC that is only 16 bits long, which can allow an attacker to compromise the integrity of a BKS keystore. Bouncy Castle release 1.47 changes the BKS format to a format which uses a 160 bit HMAC instead. This applies to any BKS keystore generated prior to BC 1.47. For situations where people need to create the files for legacy reasons a specific keystore type "BKS-V1" was introduced in 1.49. It should be noted that the use of "BKS-V1" is discouraged by the library authors and should only be used where it is otherwise safe to do so, as in where the use of a 16 bit checksum for the file integrity check is not going to cause a security issue in itself. | ||||
| CVE-2016-1000340 | 2 Bouncycastle, Redhat | 4 Bc-java, Jboss Fuse, Satellite and 1 more | 2025-05-12 | N/A |
| In the Bouncy Castle JCE Provider versions 1.51 to 1.55, a carry propagation bug was introduced in the implementation of squaring for several raw math classes have been fixed (org.bouncycastle.math.raw.Nat???). These classes are used by our custom elliptic curve implementations (org.bouncycastle.math.ec.custom.**), so there was the possibility of rare (in general usage) spurious calculations for elliptic curve scalar multiplications. Such errors would have been detected with high probability by the output validation for our scalar multipliers. | ||||
| CVE-2020-8165 | 4 Debian, Opensuse, Redhat and 1 more | 5 Debian Linux, Leap, Satellite and 2 more | 2025-05-09 | 9.8 Critical |
| A deserialization of untrusted data vulnernerability exists in rails < 5.2.4.3, rails < 6.0.3.1 that can allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially resulting in an RCE. | ||||
| CVE-2022-3644 | 2 Pulpproject, Redhat | 5 Pulp Ansible, Ansible Automation Platform, Satellite and 2 more | 2025-05-07 | 5.5 Medium |
| The collection remote for pulp_ansible stores tokens in plaintext instead of using pulp's encrypted field and exposes them in read/write mode via the API () instead of marking it as write only. | ||||
| CVE-2022-2068 | 7 Broadcom, Debian, Fedoraproject and 4 more | 49 Sannav, Debian Linux, Fedora and 46 more | 2025-05-05 | 9.8 Critical |
| In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). | ||||
| CVE-2022-1292 | 6 Debian, Fedoraproject, Netapp and 3 more | 57 Debian Linux, Fedora, A250 and 54 more | 2025-05-05 | 9.8 Critical |
| The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd). | ||||
| CVE-2023-3817 | 2 Openssl, Redhat | 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more | 2025-05-05 | 5.3 Medium |
| Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. | ||||
| CVE-2016-1000338 | 4 Bouncycastle, Canonical, Netapp and 1 more | 6 Legion-of-the-bouncy-castle-java-crytography-api, Ubuntu Linux, 7-mode Transition Tool and 3 more | 2025-05-05 | 7.5 High |
| In Bouncy Castle JCE Provider version 1.55 and earlier the DSA does not fully validate ASN.1 encoding of signature on verification. It is possible to inject extra elements in the sequence making up the signature and still have it validate, which in some cases may allow the introduction of 'invisible' data into a signed structure. | ||||
| CVE-2020-14061 | 5 Debian, Fasterxml, Netapp and 2 more | 20 Debian Linux, Jackson-databind, Active Iq Unified Manager and 17 more | 2025-05-01 | 8.1 High |
| FasterXML jackson-databind 2.x before 2.9.10.5 mishandles the interaction between serialization gadgets and typing, related to oracle.jms.AQjmsQueueConnectionFactory, oracle.jms.AQjmsXATopicConnectionFactory, oracle.jms.AQjmsTopicConnectionFactory, oracle.jms.AQjmsXAQueueConnectionFactory, and oracle.jms.AQjmsXAConnectionFactory (aka weblogic/oracle-aqjms). | ||||
| CVE-2023-38545 | 5 Fedoraproject, Haxx, Microsoft and 2 more | 19 Fedora, Libcurl, Windows 10 1809 and 16 more | 2025-05-01 | 8.8 High |
| This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake. When curl is asked to pass along the host name to the SOCKS5 proxy to allow that to resolve the address instead of it getting done by curl itself, the maximum length that host name can be is 255 bytes. If the host name is detected to be longer, curl switches to local name resolving and instead passes on the resolved address only. Due to this bug, the local variable that means "let the host resolve the name" could get the wrong value during a slow SOCKS5 handshake, and contrary to the intention, copy the too long host name to the target buffer instead of copying just the resolved address there. The target buffer being a heap based buffer, and the host name coming from the URL that curl has been told to operate with. | ||||
| CVE-2016-3108 | 2 Pulpproject, Redhat | 3 Pulp, Satellite, Satellite Capsule | 2025-04-20 | N/A |
| The pulp-gen-nodes-certificate script in Pulp before 2.8.3 allows local users to leak the keys or write to arbitrary files via a symlink attack. | ||||
| CVE-2015-1820 | 2 Redhat, Rest-client Project | 4 Cloudforms Managementengine, Satellite, Satellite Capsule and 1 more | 2025-04-20 | N/A |
| REST client for Ruby (aka rest-client) before 1.8.0 allows remote attackers to conduct session fixation attacks or obtain sensitive cookie information by leveraging passage of cookies set in a response to a redirect. | ||||
| CVE-2016-3111 | 2 Pulpproject, Redhat | 3 Pulp, Satellite, Satellite Capsule | 2025-04-20 | N/A |
| pulp.spec in the installation process for Pulp 2.8.3 generates the RSA key pairs used to validate messages between the pulp server and pulp consumers in a directory that is world-readable before later modifying the permissions, which might allow local users to read the generated RSA keys via reading the key files while the installation process is running. | ||||
| CVE-2015-0224 | 2 Apache, Redhat | 4 Qpid, Enterprise Mrg, Satellite and 1 more | 2025-04-20 | N/A |
| qpidd in Apache Qpid 0.30 and earlier allows remote attackers to cause a denial of service (daemon crash) via a crafted protocol sequence set. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-0203. | ||||
| CVE-2017-7233 | 2 Djangoproject, Redhat | 4 Django, Openstack, Satellite and 1 more | 2025-04-20 | N/A |
| Django 1.10 before 1.10.7, 1.9 before 1.9.13, and 1.8 before 1.8.18 relies on user input in some cases to redirect the user to an "on success" URL. The security check for these redirects (namely ``django.utils.http.is_safe_url()``) considered some numeric URLs "safe" when they shouldn't be, aka an open redirect vulnerability. Also, if a developer relies on ``is_safe_url()`` to provide safe redirect targets and puts such a URL into a link, they could suffer from an XSS attack. | ||||
| CVE-2017-5929 | 2 Qos, Redhat | 7 Logback, Jboss Amq, Jboss Bpms and 4 more | 2025-04-20 | 9.8 Critical |
| QOS.ch Logback before 1.2.0 has a serialization vulnerability affecting the SocketServer and ServerSocketReceiver components. | ||||
| CVE-2014-4616 | 5 Opensuse, Opensuse Project, Python and 2 more | 8 Opensuse, Opensuse, Python and 5 more | 2025-04-20 | 5.9 Medium |
| Array index error in the scanstring function in the _json module in Python 2.7 through 3.5 and simplejson before 2.6.1 allows context-dependent attackers to read arbitrary process memory via a negative index value in the idx argument to the raw_decode function. | ||||