Filtered by vendor Broadcom
Subscriptions
Total
606 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-9384 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-10-06 | 3.3 Low |
| A vulnerability was detected in appneta tcpreplay up to 4.5.1. Impacted is the function tcpedit_post_args of the file /src/tcpedit/parse_args.c. The manipulation results in null pointer dereference. The attack is only possible with local access. The exploit is now public and may be used. Upgrading to version 4.5.2-beta2 is recommended to address this issue. Upgrading the affected component is advised. The vendor explains, that he was "[a]ble to reproduce in 6fcbf03 but not in 4.5.2-beta2". | ||||
| CVE-2025-9385 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-10-06 | 5.3 Medium |
| A flaw has been found in appneta tcpreplay up to 4.5.1. The affected element is the function fix_ipv6_checksums of the file edit_packet.c of the component tcprewrite. This manipulation causes use after free. The attack is restricted to local execution. The exploit has been published and may be used. Upgrading to version 4.5.2-beta3 is sufficient to fix this issue. It is advisable to upgrade the affected component. | ||||
| CVE-2025-9386 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-10-06 | 5.3 Medium |
| A vulnerability has been found in appneta tcpreplay up to 4.5.1. The impacted element is the function get_l2len_protocol of the file get.c of the component tcprewrite. Such manipulation leads to use after free. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. Upgrading to version 4.5.2-beta3 is sufficient to resolve this issue. You should upgrade the affected component. | ||||
| CVE-2025-10847 | 1 Broadcom | 1 Unified Infrastructure Management | 2025-10-03 | N/A |
| DX Unified Infrastructure Management (Nimsoft/UIM) and below contains an improper ACL handling vulnerability in the robot (controller) component. A remote attacker can execute commands, read from, or write to the target system. | ||||
| CVE-2025-1053 | 1 Broadcom | 1 Brocade Sannav | 2025-09-26 | 4.9 Medium |
| Under certain error conditions at time of SANnav installation or upgrade, the encryption key can be written into and obtained from a Brocade SANnav supportsave. An attacker with privileged access to the Brocade SANnav database could use the encryption key to obtain passwords used by Brocade SANnav. | ||||
| CVE-2025-8661 | 1 Broadcom | 1 Symantec Pgp Encryption | 2025-09-16 | 6.1 Medium |
| A stored Cross-Site Scripting vulnerability (XSS) occurs when the server does not properly validate or encode the data entered by the user. | ||||
| CVE-2025-8660 | 1 Broadcom | 1 Symantec Pgp Encryption | 2025-09-16 | 9.8 Critical |
| Privilege escalation occurs when a user gets access to more resources or functionality than they are normally allowed. | ||||
| CVE-2022-2068 | 7 Broadcom, Debian, Fedoraproject and 4 more | 49 Sannav, Debian Linux, Fedora and 46 more | 2025-09-15 | 9.8 Critical |
| In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze). | ||||
| CVE-2025-9059 | 1 Broadcom | 2 Broadcom, Desktop Management Suite | 2025-09-12 | N/A |
| The Altiris Core Agent Updater package (AeXNSC.exe) is prone to an elevation of privileges vulnerability through DLL hijacking. | ||||
| CVE-2025-9019 | 2 Appneta, Broadcom | 2 Tcpreplay, Tcpreplay | 2025-09-11 | 3.1 Low |
| A vulnerability has been found in tcpreplay 4.5.1. This vulnerability affects the function mask_cidr6 of the file cidr.c of the component tcpprep. The manipulation leads to heap-based buffer overflow. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The researcher is able to reproduce this with the latest official release 4.5.1 and the current master branch. The code maintainer cannot reproduce this for 4.5.2-beta1. In his reply the maintainer explains that "[i]n that case, this is a duplicate that was fixed in 4.5.2." | ||||
| CVE-2024-3596 | 5 Broadcom, Freeradius, Ietf and 2 more | 12 Brocade Sannav, Fabric Operating System, Freeradius and 9 more | 2025-09-04 | 9 Critical |
| RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature. | ||||
| CVE-2024-2859 | 1 Broadcom | 1 Brocade Sannav | 2025-09-02 | 6.8 Medium |
| By default, SANnav OVA is shipped with root user login enabled. While protected by a password, access to root could expose SANnav to a remote attacker should they gain access to the root account. | ||||
| CVE-2025-4662 | 1 Broadcom | 1 Brocade Sannav | 2025-08-27 | 4.4 Medium |
| Brocade SANnav before SANnav 2.4.0a logs plaintext passphrases in the Brocade SANnav host server audit logs while executing OpenSSL command using a passphrase from the command line or while providing the passphrase through a temporary file. These audit logs are the local server VM’s audit logs and are not controlled by SANnav. These logs are only visible to the server admin of the host server and are not visible to the SANnav admin or any SANnav user. | ||||
| CVE-2025-6390 | 1 Broadcom | 1 Brocade Sannav | 2025-08-27 | 4.4 Medium |
| Brocade SANnav before SANnav 2.4.0a logs passwords and pbe keys in the Brocade SANnav server audit logs after installation and under specific conditions. These audit logs are the local server VM’s audit logs and are not controlled by SANnav. These logs are only visible to the server admin of the host server and are not visible to the SANnav admin or any SANnav user. | ||||
| CVE-2025-6392 | 1 Broadcom | 1 Brocade Sannav | 2025-08-27 | 4.4 Medium |
| Brocade SANnav before Brocade SANnav 2.4.0a could log database passwords in clear text in audit logs when the daily data dump collector invokes docker exec commands. These audit logs are the local server VM’s audit logs and are not controlled by SANnav. These logs are only visible to the server admin of the host server and are not visible to the SANnav admin or any SANnav user. | ||||
| CVE-2024-10404 | 1 Broadcom | 1 Brocade Sannav | 2025-08-26 | 5.5 Medium |
| CalInvocationHandler in Brocade SANnav before 2.3.1b logs sensitive information in clear text. The vulnerability could allow an authenticated, local attacker to view Brocade Fabric OS switch sensitive information in clear text. An attacker with administrative privileges could retrieve sensitive information including passwords; SNMP responses that contain AuthSecret and PrivSecret after collecting a “supportsave” or getting access to an already collected “supportsave”. NOTE: this issue exists because of an incomplete fix for CVE-2024-29952 | ||||
| CVE-2024-2240 | 2 Broadcom, Brocade | 2 Brocade Sannav, Sannav | 2025-08-26 | 7.2 High |
| Docker daemon in Brocade SANnav before SANnav 2.3.1b runs without auditing. The vulnerability could allow a remote authenticated attacker to execute various attacks. | ||||
| CVE-2024-10405 | 2 Broadcom, Brocade | 2 Brocade Sannav, Sannav | 2025-08-26 | 5.3 Medium |
| Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network. | ||||
| CVE-2024-4282 | 2 Broadcom, Brocade | 2 Brocade Sannav, Sannav | 2025-08-26 | 9.8 Critical |
| Brocade SANnav OVA before SANnav 2.3.1b enables SHA1 deprecated setting for SSH for port 22. | ||||
| CVE-2025-3599 | 1 Broadcom | 2 Symantec Endpoint Protection, Symantec Eraser Engine | 2025-08-21 | 6.5 Medium |
| Symantec Endpoint Protection Windows Agent, running an ERASER Engine prior to 119.1.7.8, may be susceptible to an Elevation of Privilege vulnerability, which may allow an attacker to delete resources that are normally protected from an application or user. | ||||