Filtered by vendor Debian
Subscriptions
Total
9959 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38723 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix jump offset calculation in tailcall The extra pass of bpf_int_jit_compile() skips JIT context initialization which essentially skips offset calculation leaving out_offset = -1, so the jmp_offset in emit_bpf_tail_call is calculated by "#define jmp_offset (out_offset - (cur_offset))" is a negative number, which is wrong. The final generated assembly are as follow. 54: bgeu $a2, $t1, -8 # 0x0000004c 58: addi.d $a6, $s5, -1 5c: bltz $a6, -16 # 0x0000004c 60: alsl.d $t2, $a2, $a1, 0x3 64: ld.d $t2, $t2, 264 68: beq $t2, $zero, -28 # 0x0000004c Before apply this patch, the follow test case will reveal soft lock issues. cd tools/testing/selftests/bpf/ ./test_progs --allow=tailcalls/tailcall_bpf2bpf_1 dmesg: watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056] | ||||
| CVE-2025-38724 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm() Lei Lu recently reported that nfsd4_setclientid_confirm() did not check the return value from get_client_locked(). a SETCLIENTID_CONFIRM could race with a confirmed client expiring and fail to get a reference. That could later lead to a UAF. Fix this by getting a reference early in the case where there is an extant confirmed client. If that fails then treat it as if there were no confirmed client found at all. In the case where the unconfirmed client is expiring, just fail and return the result from get_client_locked(). | ||||
| CVE-2025-38725 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: add phy_mask for ax88772 mdio bus Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue. | ||||
| CVE-2025-38727 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netlink: avoid infinite retry looping in netlink_unicast() netlink_attachskb() checks for the socket's read memory allocation constraints. Firstly, it has: rmem < READ_ONCE(sk->sk_rcvbuf) to check if the just increased rmem value fits into the socket's receive buffer. If not, it proceeds and tries to wait for the memory under: rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf) The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is equal to sk->sk_rcvbuf. Thus the function neither successfully accepts these conditions, nor manages to reschedule the task - and is called in retry loop for indefinite time which is caught as: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212 (t=26000 jiffies g=230833 q=259957) NMI backtrace for cpu 0 CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014 Call Trace: <IRQ> dump_stack lib/dump_stack.c:120 nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105 nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62 rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335 rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590 update_process_times kernel/time/timer.c:1953 tick_sched_handle kernel/time/tick-sched.c:227 tick_sched_timer kernel/time/tick-sched.c:1399 __hrtimer_run_queues kernel/time/hrtimer.c:1652 hrtimer_interrupt kernel/time/hrtimer.c:1717 __sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113 asm_call_irq_on_stack arch/x86/entry/entry_64.S:808 </IRQ> netlink_attachskb net/netlink/af_netlink.c:1234 netlink_unicast net/netlink/af_netlink.c:1349 kauditd_send_queue kernel/audit.c:776 kauditd_thread kernel/audit.c:897 kthread kernel/kthread.c:328 ret_from_fork arch/x86/entry/entry_64.S:304 Restore the original behavior of the check which commit in Fixes accidentally missed when restructuring the code. Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2025-38728 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb3: fix for slab out of bounds on mount to ksmbd With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] | ||||
| CVE-2025-38729 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too. | ||||
| CVE-2023-4911 | 6 Canonical, Debian, Fedoraproject and 3 more | 43 Ubuntu Linux, Debian Linux, Fedora and 40 more | 2026-01-08 | 7.8 High |
| A buffer overflow was discovered in the GNU C Library's dynamic loader ld.so while processing the GLIBC_TUNABLES environment variable. This issue could allow a local attacker to use maliciously crafted GLIBC_TUNABLES environment variables when launching binaries with SUID permission to execute code with elevated privileges. | ||||
| CVE-2025-38352 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() If an exiting non-autoreaping task has already passed exit_notify() and calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent or debugger right after unlock_task_sighand(). If a concurrent posix_cpu_timer_del() runs at that moment, it won't be able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or lock_task_sighand() will fail. Add the tsk->exit_state check into run_posix_cpu_timers() to fix this. This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because exit_task_work() is called before exit_notify(). But the check still makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail anyway in this case. | ||||
| CVE-2025-39703 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net, hsr: reject HSR frame if skb can't hold tag Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR fr ---truncated--- | ||||
| CVE-2025-39706 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Destroy KFD debugfs after destroy KFD wq Since KFD proc content was moved to kernel debugfs, we can't destroy KFD debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line debugfs_remove_recursive(entry->proc_dentry); tries to remove /sys/kernel/debug/kfd/proc/<pid> while /sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel NULL pointer. (cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) | ||||
| CVE-2025-39709 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: venus: protect against spurious interrupts during probe Make sure the interrupt handler is initialized before the interrupt is registered. If the IRQ is registered before hfi_create(), it's possible that an interrupt fires before the handler setup is complete, leading to a NULL dereference. This error condition has been observed during system boot on Rb3Gen2. | ||||
| CVE-2025-39691 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/buffer: fix use-after-free when call bh_read() helper There's issue as follows: BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110 Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0 CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x2c/0x390 print_report+0xb4/0x270 kasan_report+0xb8/0xf0 end_buffer_read_sync+0xe3/0x110 end_bio_bh_io_sync+0x56/0x80 blk_update_request+0x30a/0x720 scsi_end_request+0x51/0x2b0 scsi_io_completion+0xe3/0x480 ? scsi_device_unbusy+0x11e/0x160 blk_complete_reqs+0x7b/0x90 handle_softirqs+0xef/0x370 irq_exit_rcu+0xa5/0xd0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> Above issue happens when do ntfs3 filesystem mount, issue may happens as follows: mount IRQ ntfs_fill_super read_cache_page do_read_cache_folio filemap_read_folio mpage_read_folio do_mpage_readpage ntfs_get_block_vbo bh_read submit_bh wait_on_buffer(bh); blk_complete_reqs scsi_io_completion scsi_end_request blk_update_request end_bio_bh_io_sync end_buffer_read_sync __end_buffer_read_notouch unlock_buffer wait_on_buffer(bh);--> return will return to caller put_bh --> trigger stack-out-of-bounds In the mpage_read_folio() function, the stack variable 'map_bh' is passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and wait_on_buffer() returns to continue processing, the stack variable is likely to be reclaimed. Consequently, during the end_buffer_read_sync() process, calling put_bh() may result in stack overrun. If the bh is not allocated on the stack, it belongs to a folio. Freeing a buffer head which belongs to a folio is done by drop_buffers() which will fail to free buffers which are still locked. So it is safe to call put_bh() before __end_buffer_read_notouch(). | ||||
| CVE-2025-39692 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy() We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()! Otherwise already existing connections try to use smb_direct_wq as a NULL pointer. | ||||
| CVE-2025-39697 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a race when updating an existing write After nfs_lock_and_join_requests() tests for whether the request is still attached to the mapping, nothing prevents a call to nfs_inode_remove_request() from succeeding until we actually lock the page group. The reason is that whoever called nfs_inode_remove_request() doesn't necessarily have a lock on the page group head. So in order to avoid races, let's take the page group lock earlier in nfs_lock_and_join_requests(), and hold it across the removal of the request in nfs_inode_remove_request(). | ||||
| CVE-2025-39701 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: Fix the driver update version check The security-version-number check should be used rather than the runtime version check for driver updates. Otherwise, the firmware update would fail when the update binary had a lower runtime version number than the current one. [ rjw: Changelog edits ] | ||||
| CVE-2025-39702 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this. | ||||
| CVE-2025-38735 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver. | ||||
| CVE-2025-38736 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range. | ||||
| CVE-2025-39681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper Since 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot") resctrl_cpu_detect() has been moved from common CPU initialization code to the vendor-specific BSP init helper, while Hygon didn't put that call in their code. This triggers a division by zero fault during early booting stage on our machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale. Add the missing resctrl_cpu_detect() in the Hygon BSP init helper. [ bp: Massage commit message. ] | ||||
| CVE-2025-39683 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed. | ||||