Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
14998 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-41060 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check bo_va->bo is non-NULL before using it The call to radeon_vm_clear_freed might clear bo_va->bo, so we have to check it before dereferencing it. | ||||
| CVE-2024-41059 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value in copy_name [syzbot reported] BUG: KMSAN: uninit-value in sized_strscpy+0xc4/0x160 sized_strscpy+0xc4/0x160 copy_name+0x2af/0x320 fs/hfsplus/xattr.c:411 hfsplus_listxattr+0x11e9/0x1a50 fs/hfsplus/xattr.c:750 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3877 [inline] slab_alloc_node mm/slub.c:3918 [inline] kmalloc_trace+0x57b/0xbe0 mm/slub.c:4065 kmalloc include/linux/slab.h:628 [inline] hfsplus_listxattr+0x4cc/0x1a50 fs/hfsplus/xattr.c:699 vfs_listxattr fs/xattr.c:493 [inline] listxattr+0x1f3/0x6b0 fs/xattr.c:840 path_listxattr fs/xattr.c:864 [inline] __do_sys_listxattr fs/xattr.c:876 [inline] __se_sys_listxattr fs/xattr.c:873 [inline] __x64_sys_listxattr+0x16b/0x2f0 fs/xattr.c:873 x64_sys_call+0x2ba0/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:195 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Fix] When allocating memory to strbuf, initialize memory to 0. | ||||
| CVE-2024-41051 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: wait for ondemand_object_worker to finish when dropping object When queuing ondemand_object_worker() to re-open the object, cachefiles_object is not pinned. The cachefiles_object may be freed when the pending read request is completed intentionally and the related erofs is umounted. If ondemand_object_worker() runs after the object is freed, it will incur use-after-free problem as shown below. process A processs B process C process D cachefiles_ondemand_send_req() // send a read req X // wait for its completion // close ondemand fd cachefiles_ondemand_fd_release() // set object as CLOSE cachefiles_ondemand_daemon_read() // set object as REOPENING queue_work(fscache_wq, &info->ondemand_work) // close /dev/cachefiles cachefiles_daemon_release cachefiles_flush_reqs complete(&req->done) // read req X is completed // umount the erofs fs cachefiles_put_object() // object will be freed cachefiles_ondemand_deinit_obj_info() kmem_cache_free(object) // both info and object are freed ondemand_object_worker() When dropping an object, it is no longer necessary to reopen the object, so use cancel_work_sync() to cancel or wait for ondemand_object_worker() to finish. | ||||
| CVE-2024-41049 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: filelock: fix potential use-after-free in posix_lock_inode Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode(). The request pointer had been changed earlier to point to a lock entry that was added to the inode's list. However, before the tracepoint could fire, another task raced in and freed that lock. Fix this by moving the tracepoint inside the spinlock, which should ensure that this doesn't happen. | ||||
| CVE-2024-41048 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: skmsg: Skip zero length skb in sk_msg_recvmsg When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. | ||||
| CVE-2024-41047 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix XDP program unloading while removing the driver The commit 6533e558c650 ("i40e: Fix reset path while removing the driver") introduced a new PF state "__I40E_IN_REMOVE" to block modifying the XDP program while the driver is being removed. Unfortunately, such a change is useful only if the ".ndo_bpf()" callback was called out of the rmmod context because unloading the existing XDP program is also a part of driver removing procedure. In other words, from the rmmod context the driver is expected to unload the XDP program without reporting any errors. Otherwise, the kernel warning with callstack is printed out to dmesg. Example failing scenario: 1. Load the i40e driver. 2. Load the XDP program. 3. Unload the i40e driver (using "rmmod" command). The example kernel warning log: [ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870 [...] [ +0.002726] Call Trace: [ +0.002457] <TASK> [ +0.002119] ? __warn+0x80/0x120 [ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005586] ? report_bug+0x164/0x190 [ +0.003678] ? handle_bug+0x3c/0x80 [ +0.003503] ? exc_invalid_op+0x17/0x70 [ +0.003846] ? asm_exc_invalid_op+0x1a/0x20 [ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870 [ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870 [ +0.005586] unregister_netdevice_queue+0xf7/0x140 [ +0.004806] unregister_netdev+0x1c/0x30 [ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e] [ +0.004604] i40e_remove+0x1a1/0x420 [i40e] [ +0.004220] pci_device_remove+0x3f/0xb0 [ +0.003943] device_release_driver_internal+0x19f/0x200 [ +0.005243] driver_detach+0x48/0x90 [ +0.003586] bus_remove_driver+0x6d/0xf0 [ +0.003939] pci_unregister_driver+0x2e/0xb0 [ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e] [ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310 [ +0.005153] do_syscall_64+0x85/0x170 [ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220 [ +0.004886] ? do_syscall_64+0x95/0x170 [ +0.003851] ? exc_page_fault+0x7e/0x180 [ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79 [ +0.005064] RIP: 0033:0x7f59dc9347cb [ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48 [ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb [ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748 [ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000 [ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000 [ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000 [ +0.007151] </TASK> [ +0.002204] ---[ end trace 0000000000000000 ]--- Fix this by checking if the XDP program is being loaded or unloaded. Then, block only loading a new program while "__I40E_IN_REMOVE" is set. Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP callback to avoid unnecessary operations and checks. | ||||
| CVE-2024-41044 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp: reject claimed-as-LCP but actually malformed packets Since 'ppp_async_encode()' assumes valid LCP packets (with code from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that LCP packet has an actual body beyond PPP_LCP header bytes, and reject claimed-as-LCP but actually malformed data otherwise. | ||||
| CVE-2024-41038 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers Check that all fields of a V2 algorithm header fit into the available firmware data buffer. The wmfw V2 format introduced variable-length strings in the algorithm block header. This means the overall header length is variable, and the position of most fields varies depending on the length of the string fields. Each field must be checked to ensure that it does not overflow the firmware data buffer. As this ia bugfix patch, the fixes avoid making any significant change to the existing code. This makes it easier to review and less likely to introduce new bugs. | ||||
| CVE-2024-41035 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor Syzbot has identified a bug in usbcore (see the Closes: tag below) caused by our assumption that the reserved bits in an endpoint descriptor's bEndpointAddress field will always be 0. As a result of the bug, the endpoint_is_duplicate() routine in config.c (and possibly other routines as well) may believe that two descriptors are for distinct endpoints, even though they have the same direction and endpoint number. This can lead to confusion, including the bug identified by syzbot (two descriptors with matching endpoint numbers and directions, where one was interrupt and the other was bulk). To fix the bug, we will clear the reserved bits in bEndpointAddress when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1 specs say these bits are "Reserved, reset to zero".) This requires us to make a copy of the descriptor earlier in usb_parse_endpoint() and use the copy instead of the original when checking for duplicates. | ||||
| CVE-2024-41034 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel bug on rename operation of broken directory Syzbot reported that in rename directory operation on broken directory on nilfs2, __block_write_begin_int() called to prepare block write may fail BUG_ON check for access exceeding the folio/page size. This is because nilfs_dotdot(), which gets parent directory reference entry ("..") of the directory to be moved or renamed, does not check consistency enough, and may return location exceeding folio/page size for broken directories. Fix this issue by checking required directory entries ("." and "..") in the first chunk of the directory in nilfs_dotdot(). | ||||
| CVE-2024-41030 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 | ||||
| CVE-2024-41027 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: Fix userfaultfd_api to return EINVAL as expected Currently if we request a feature that is not set in the Kernel config we fail silently and return all the available features. However, the man page indicates we should return an EINVAL. We need to fix this issue since we can end up with a Kernel warning should a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with the config not set with this feature. [ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660 [ 200.820738] Modules linked in: [ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8 [ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022 [ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660 | ||||
| CVE-2024-41022 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq() The "instance" variable needs to be signed for the error handling to work. | ||||
| CVE-2024-41016 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images. | ||||
| CVE-2024-41012 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-03 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: filelock: Remove locks reliably when fcntl/close race is detected When fcntl_setlk() races with close(), it removes the created lock with do_lock_file_wait(). However, LSMs can allow the first do_lock_file_wait() that created the lock while denying the second do_lock_file_wait() that tries to remove the lock. Separately, posix_lock_file() could also fail to remove a lock due to GFP_KERNEL allocation failure (when splitting a range in the middle). After the bug has been triggered, use-after-free reads will occur in lock_get_status() when userspace reads /proc/locks. This can likely be used to read arbitrary kernel memory, but can't corrupt kernel memory. Fix it by calling locks_remove_posix() instead, which is designed to reliably get rid of POSIX locks associated with the given file and files_struct and is also used by filp_flush(). | ||||
| CVE-2024-41011 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. | ||||
| CVE-2024-41009 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter. | ||||
| CVE-2024-41007 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-11-03 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. | ||||
| CVE-2024-41006 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netrom: Fix a memory leak in nr_heartbeat_expiry() syzbot reported a memory leak in nr_create() [0]. Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.") added sock_hold() to the nr_heartbeat_expiry() function, where a) a socket has a SOCK_DESTROY flag or b) a listening socket has a SOCK_DEAD flag. But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor has already been closed and the nr_release() function has been called. So it makes no sense to hold the reference count because no one will call another nr_destroy_socket() and put it as in the case "b." nr_connect nr_establish_data_link nr_start_heartbeat nr_release switch (nr->state) case NR_STATE_3 nr->state = NR_STATE_2 sock_set_flag(sk, SOCK_DESTROY); nr_rx_frame nr_process_rx_frame switch (nr->state) case NR_STATE_2 nr_state2_machine() nr_disconnect() nr_sk(sk)->state = NR_STATE_0 sock_set_flag(sk, SOCK_DEAD) nr_heartbeat_expiry switch (nr->state) case NR_STATE_0 if (sock_flag(sk, SOCK_DESTROY) || (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) sock_hold() // ( !!! ) nr_destroy_socket() To fix the memory leak, let's call sock_hold() only for a listening socket. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. [0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16 | ||||
| CVE-2024-41002 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - Fix memory leak for sec resource release The AIV is one of the SEC resources. When releasing resources, it need to release the AIV resources at the same time. Otherwise, memory leakage occurs. The aiv resource release is added to the sec resource release function. | ||||