Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15488 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-0684 | 2 Gnu, Redhat | 3 Grub2, Enterprise Linux, Openshift | 2025-07-28 | 6.4 Medium |
| A flaw was found in grub2. When performing a symlink lookup from a reiserfs filesystem, grub's reiserfs fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_reiserfs_read_symlink() will call grub_reiserfs_read_real() with a overflown length parameter, leading to a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution, by-passing secure boot protections. | ||||
| CVE-2024-50057 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-07-28 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tipd: Free IRQ only if it was requested before In polling mode, if no IRQ was requested there is no need to free it. Call devm_free_irq() only if client->irq is set. This fixes the warning caused by the tps6598x module removal: WARNING: CPU: 2 PID: 333 at kernel/irq/devres.c:144 devm_free_irq+0x80/0x8c ... ... Call trace: devm_free_irq+0x80/0x8c tps6598x_remove+0x28/0x88 [tps6598x] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 tps6598x_i2c_driver_exit+0x18/0xc3c [tps6598x] __arm64_sys_delete_module+0x184/0x264 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc8/0xe8 do_el0_svc+0x20/0x2c el0_svc+0x28/0x98 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 | ||||
| CVE-2024-42124 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Make qedf_execute_tmf() non-preemptible Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] | ||||
| CVE-2024-12243 | 1 Redhat | 4 Discovery, Enterprise Linux, Openshift and 1 more | 2025-07-28 | 5.3 Medium |
| A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition. | ||||
| CVE-2025-4802 | 2 Gnu, Redhat | 7 Glibc, Discovery, Enterprise Linux and 4 more | 2025-07-26 | 7.8 High |
| Untrusted LD_LIBRARY_PATH environment variable vulnerability in the GNU C Library version 2.27 to 2.38 allows attacker controlled loading of dynamically shared library in statically compiled setuid binaries that call dlopen (including internal dlopen calls after setlocale or calls to NSS functions such as getaddrinfo). | ||||
| CVE-2023-4387 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-07-25 | 7.1 High |
| A use-after-free flaw was found in vmxnet3_rq_alloc_rx_buf in drivers/net/vmxnet3/vmxnet3_drv.c in VMware's vmxnet3 ethernet NIC driver in the Linux Kernel. This issue could allow a local attacker to crash the system due to a double-free while cleaning up vmxnet3_rq_cleanup_all, which could also lead to a kernel information leak problem. | ||||
| CVE-2025-6018 | 1 Redhat | 1 Enterprise Linux | 2025-07-25 | 7.8 High |
| A Local Privilege Escalation (LPE) vulnerability has been discovered in pam-config within Linux Pluggable Authentication Modules (PAM). This flaw allows an unprivileged local attacker (for example, a user logged in via SSH) to obtain the elevated privileges normally reserved for a physically present, "allow_active" user. The highest risk is that the attacker can then perform all allow_active yes Polkit actions, which are typically restricted to console users, potentially gaining unauthorized control over system configurations, services, or other sensitive operations. | ||||
| CVE-2025-32462 | 2 Redhat, Sudo Project | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-07-25 | 2.8 Low |
| Sudo before 1.9.17p1, when used with a sudoers file that specifies a host that is neither the current host nor ALL, allows listed users to execute commands on unintended machines. | ||||
| CVE-2025-26466 | 4 Canonical, Debian, Openbsd and 1 more | 5 Ubuntu Linux, Debian Linux, Openssh and 2 more | 2025-07-25 | 5.9 Medium |
| A flaw was found in the OpenSSH package. For each ping packet the SSH server receives, a pong packet is allocated in a memory buffer and stored in a queue of packages. It is only freed when the server/client key exchange has finished. A malicious client may keep sending such packages, leading to an uncontrolled increase in memory consumption on the server side. Consequently, the server may become unavailable, resulting in a denial of service attack. | ||||
| CVE-2024-12718 | 2 Python, Redhat | 7 Cpython, Enterprise Linux, Rhel Aus and 4 more | 2025-07-24 | 5.3 Medium |
| Allows modifying some file metadata (e.g. last modified) with filter="data" or file permissions (chmod) with filter="tar" of files outside the extraction directory. You are affected by this vulnerability if using the tarfile module to extract untrusted tar archives using TarFile.extractall() or TarFile.extract() using the filter= parameter with a value of "data" or "tar". See the tarfile extraction filters documentation https://docs.python.org/3/library/tarfile.html#tarfile-extraction-filter for more information. Only Python versions 3.12 or later are affected by these vulnerabilities, earlier versions don't include the extraction filter feature. Note that for Python 3.14 or later the default value of filter= changed from "no filtering" to `"data", so if you are relying on this new default behavior then your usage is also affected. Note that none of these vulnerabilities significantly affect the installation of source distributions which are tar archives as source distributions already allow arbitrary code execution during the build process. However when evaluating source distributions it's important to avoid installing source distributions with suspicious links. | ||||
| CVE-2024-45769 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2025-07-24 | 5.5 Medium |
| A vulnerability was found in Performance Co-Pilot (PCP). This flaw allows an attacker to send specially crafted data to the system, which could cause the program to misbehave or crash. | ||||
| CVE-2022-24765 | 6 Apple, Debian, Fedoraproject and 3 more | 7 Xcode, Debian Linux, Fedora and 4 more | 2025-07-24 | 6 Medium |
| Git for Windows is a fork of Git containing Windows-specific patches. This vulnerability affects users working on multi-user machines, where untrusted parties have write access to the same hard disk. Those untrusted parties could create the folder `C:\.git`, which would be picked up by Git operations run supposedly outside a repository while searching for a Git directory. Git would then respect any config in said Git directory. Git Bash users who set `GIT_PS1_SHOWDIRTYSTATE` are vulnerable as well. Users who installed posh-gitare vulnerable simply by starting a PowerShell. Users of IDEs such as Visual Studio are vulnerable: simply creating a new project would already read and respect the config specified in `C:\.git\config`. Users of the Microsoft fork of Git are vulnerable simply by starting a Git Bash. The problem has been patched in Git for Windows v2.35.2. Users unable to upgrade may create the folder `.git` on all drives where Git commands are run, and remove read/write access from those folders as a workaround. Alternatively, define or extend `GIT_CEILING_DIRECTORIES` to cover the _parent_ directory of the user profile, e.g. `C:\Users` if the user profile is located in `C:\Users\my-user-name`. | ||||
| CVE-2021-3347 | 4 Debian, Fedoraproject, Linux and 1 more | 10 Debian Linux, Fedora, Linux Kernel and 7 more | 2025-07-24 | 7.8 High |
| An issue was discovered in the Linux kernel through 5.10.11. PI futexes have a kernel stack use-after-free during fault handling, allowing local users to execute code in the kernel, aka CID-34b1a1ce1458. | ||||
| CVE-2020-14381 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-07-24 | 7.8 High |
| A flaw was found in the Linux kernel’s futex implementation. This flaw allows a local attacker to corrupt system memory or escalate their privileges when creating a futex on a filesystem that is about to be unmounted. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. | ||||
| CVE-2024-47606 | 3 Debian, Gstreamer Project, Redhat | 8 Debian Linux, Gstreamer, Enterprise Linux and 5 more | 2025-07-24 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2025-47268 | 2 Iputils Project, Redhat | 2 Iputils, Enterprise Linux | 2025-07-23 | 6.5 Medium |
| ping in iputils before 20250602 allows a denial of service (application error or incorrect data collection) via a crafted ICMP Echo Reply packet, because of a signed 64-bit integer overflow in timestamp multiplication. | ||||
| CVE-2025-24928 | 1 Redhat | 12 Enterprise Linux, Jboss Core Services, Network Observ Optr and 9 more | 2025-07-23 | 7.8 High |
| libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a stack-based buffer overflow in xmlSnprintfElements in valid.c. To exploit this, DTD validation must occur for an untrusted document or untrusted DTD. NOTE: this is similar to CVE-2017-9047. | ||||
| CVE-2024-9287 | 2 Python, Redhat | 4 Cpython, Python, Enterprise Linux and 1 more | 2025-07-23 | 7.8 High |
| A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected. | ||||
| CVE-2023-6349 | 2 Redhat, Webmproject | 2 Enterprise Linux, Libvpx | 2025-07-22 | 7.5 High |
| A heap overflow vulnerability exists in libvpx - Encoding a frame that has larger dimensions than the originally configured size with VP9 may result in a heap overflow in libvpx. We recommend upgrading to version 1.13.1 or above | ||||
| CVE-2024-5197 | 3 Debian, Redhat, Webmproject | 3 Debian Linux, Enterprise Linux, Libvpx | 2025-07-22 | 9.1 Critical |
| There exists interger overflows in libvpx in versions prior to 1.14.1. Calling vpx_img_alloc() with a large value of the d_w, d_h, or align parameter may result in integer overflows in the calculations of buffer sizes and offsets and some fields of the returned vpx_image_t struct may be invalid. Calling vpx_img_wrap() with a large value of the d_w, d_h, or stride_align parameter may result in integer overflows in the calculations of buffer sizes and offsets and some fields of the returned vpx_image_t struct may be invalid. We recommend upgrading to version 1.14.1 or beyond | ||||