Filtered by vendor Debian
Subscriptions
Filtered by product Debian Linux
Subscriptions
Total
9854 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39718 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Validate length in packet header before skb_put() When receiving a vsock packet in the guest, only the virtqueue buffer size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately, virtio_vsock_skb_rx_put() uses the length from the packet header as the length argument to skb_put(), potentially resulting in SKB overflow if the host has gone wonky. Validate the length as advertised by the packet header before calling virtio_vsock_skb_rx_put(). | ||||
| CVE-2025-39719 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: bno055: fix OOB access of hw_xlate array Fix a potential out-of-bounds array access of the hw_xlate array in bno055.c. In bno055_get_regmask(), hw_xlate was iterated over the length of the vals array instead of the length of the hw_xlate array. In the case of bno055_gyr_scale, the vals array is larger than the hw_xlate array, so this could result in an out-of-bounds access. In practice, this shouldn't happen though because a match should always be found which breaks out of the for loop before it iterates beyond the end of the hw_xlate array. By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be sure we are iterating over the correct length. | ||||
| CVE-2025-38528 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject %p% format string in bprintf-like helpers static const char fmt[] = "%p%"; bpf_trace_printk(fmt, sizeof(fmt)); The above BPF program isn't rejected and causes a kernel warning at runtime: Please remove unsupported %\x00 in format string WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0 This happens because bpf_bprintf_prepare skips over the second %, detected as punctuation, while processing %p. This patch fixes it by not skipping over punctuation. %\x00 is then processed in the next iteration and rejected. | ||||
| CVE-2025-38529 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: aio_iiro_16: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & 0xdcfc) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2025-38530 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl812: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & board->irq_bits) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2025-38535 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code assumed that the regulator should be disabled. However, if the regulator is marked as always-on, regulator_is_enabled() continues to return true, leading to an incorrect attempt to disable a regulator which is not enabled. This can result in warnings such as: [ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004 _regulator_disable+0xe4/0x1a0 [ 250.155652] unbalanced disables for VIN_SYS_5V0 To fix this, we move the regulator control logic into tegra186_xusb_padctl_id_override() function since it's directly related to the ID override state. The regulator is now only disabled when the role transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID register. This ensures that regulator enable/disable operations are properly balanced and only occur when actually transitioning to/from host mode. | ||||
| CVE-2025-38587 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_info_uses_dev() fib6_info_uses_dev() seems to rely on RCU without an explicit protection. Like the prior fix in rt6_nlmsg_size(), we need to make sure fib6_del_route() or fib6_add_rt2node() have not removed the anchor from the list, or we risk an infinite loop. | ||||
| CVE-2025-38588 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent infinite loop in rt6_nlmsg_size() While testing prior patch, I was able to trigger an infinite loop in rt6_nlmsg_size() in the following place: list_for_each_entry_rcu(sibling, &f6i->fib6_siblings, fib6_siblings) { rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len); } This is because fib6_del_route() and fib6_add_rt2node() uses list_del_rcu(), which can confuse rcu readers, because they might no longer see the head of the list. Restart the loop if f6i->fib6_nsiblings is zero. | ||||
| CVE-2025-38601 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: clear initialized flag for deinit-ed srng lists In a number of cases we see kernel panics on resume due to ath11k kernel page fault, which happens under the following circumstances: 1) First ath11k_hal_dump_srng_stats() call Last interrupt received for each group: ath11k_pci 0000:01:00.0: group_id 0 22511ms before ath11k_pci 0000:01:00.0: group_id 1 14440788ms before [..] ath11k_pci 0000:01:00.0: failed to receive control response completion, polling.. ath11k_pci 0000:01:00.0: Service connect timeout ath11k_pci 0000:01:00.0: failed to connect to HTT: -110 ath11k_pci 0000:01:00.0: failed to start core: -110 ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM ath11k_pci 0000:01:00.0: already resetting count 2 ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110 ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110 ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery [..] 2) At this point reconfiguration fails (we have 2 resets) and ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit() which destroys srng lists. However, it does not reset per-list ->initialized flag. 3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized flag and attempts to dump srng stats: Last interrupt received for each group: ath11k_pci 0000:01:00.0: group_id 0 66785ms before ath11k_pci 0000:01:00.0: group_id 1 14485062ms before ath11k_pci 0000:01:00.0: group_id 2 14485062ms before ath11k_pci 0000:01:00.0: group_id 3 14485062ms before ath11k_pci 0000:01:00.0: group_id 4 14780845ms before ath11k_pci 0000:01:00.0: group_id 5 14780845ms before ath11k_pci 0000:01:00.0: group_id 6 14485062ms before ath11k_pci 0000:01:00.0: group_id 7 66814ms before ath11k_pci 0000:01:00.0: group_id 8 68997ms before ath11k_pci 0000:01:00.0: group_id 9 67588ms before ath11k_pci 0000:01:00.0: group_id 10 69511ms before BUG: unable to handle page fault for address: ffffa007404eb010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k] Call Trace: <TASK> ? __die_body+0xae/0xb0 ? page_fault_oops+0x381/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)] ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)] worker_thread+0x389/0x930 kthread+0x149/0x170 Clear per-list ->initialized flag in ath11k_hal_srng_deinit(). | ||||
| CVE-2025-38538 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: nbpfaxi: Fix memory corruption in probe() The nbpf->chan[] array is allocated earlier in the nbpf_probe() function and it has "num_channels" elements. These three loops iterate one element farther than they should and corrupt memory. The changes to the second loop are more involved. In this case, we're copying data from the irqbuf[] array into the nbpf->chan[] array. If the data in irqbuf[i] is the error IRQ then we skip it, so the iterators are not in sync. I added a check to ensure that we don't go beyond the end of the irqbuf[] array. I'm pretty sure this can't happen, but it seemed harmless to add a check. On the other hand, after the loop has ended there is a check to ensure that the "chan" iterator is where we expect it to be. In the original code we went one element beyond the end of the array so the iterator wasn't in the correct place and it would always return -EINVAL. However, now it will always be in the correct place. I deleted the check since we know the result. | ||||
| CVE-2025-38539 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add down_write(trace_event_sem) when adding trace event When a module is loaded, it adds trace events defined by the module. It may also need to modify the modules trace printk formats to replace enum names with their values. If two modules are loaded at the same time, the adding of the event to the ftrace_events list can corrupt the walking of the list in the code that is modifying the printk format strings and crash the kernel. The addition of the event should take the trace_event_sem for write while it adds the new event. Also add a lockdep_assert_held() on that semaphore in __trace_add_event_dirs() as it iterates the list. | ||||
| CVE-2025-38542 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: appletalk: Fix device refcount leak in atrtr_create() When updating an existing route entry in atrtr_create(), the old device reference was not being released before assigning the new device, leading to a device refcount leak. Fix this by calling dev_put() to release the old device reference before holding the new one. | ||||
| CVE-2025-38602 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue since it may return NULL pointer. | ||||
| CVE-2025-38604 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: Kill URBs before clearing tx status queue In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing b_tx_status.queue. This change prevents callbacks from using already freed skb due to anchor was not killed before freeing such skb. BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211] Call Trace: <IRQ> rtl8187_tx_cb+0x116/0x150 [rtl8187] __usb_hcd_giveback_urb+0x9d/0x120 usb_giveback_urb_bh+0xbb/0x140 process_one_work+0x19b/0x3c0 bh_worker+0x1a7/0x210 tasklet_action+0x10/0x30 handle_softirqs+0xf0/0x340 __irq_exit_rcu+0xcd/0xf0 common_interrupt+0x85/0xa0 </IRQ> Tested on RTL8187BvE device. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-38543 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: nvdec: Fix dma_alloc_coherent error check Check for NULL return value with dma_alloc_coherent, in line with Robin's fix for vic.c in 'drm/tegra: vic: Fix DMA API misuse'. | ||||
| CVE-2025-38608 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls When sending plaintext data, we initially calculated the corresponding ciphertext length. However, if we later reduced the plaintext data length via socket policy, we failed to recalculate the ciphertext length. This results in transmitting buffers containing uninitialized data during ciphertext transmission. This causes uninitialized bytes to be appended after a complete "Application Data" packet, leading to errors on the receiving end when parsing TLS record. | ||||
| CVE-2025-38546 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix memory leak of struct clip_vcc. ioctl(ATMARP_MKIP) allocates struct clip_vcc and set it to vcc->user_back. The code assumes that vcc_destroy_socket() passes NULL skb to vcc->push() when the socket is close()d, and then clip_push() frees clip_vcc. However, ioctl(ATMARPD_CTRL) sets NULL to vcc->push() in atm_init_atmarp(), resulting in memory leak. Let's serialise two ioctl() by lock_sock() and check vcc->push() in atm_init_atmarp() to prevent memleak. | ||||
| CVE-2025-38548 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Validate the size of the received input buffer Add buffer_recv_size to store the size of the received bytes. Validate buffer_recv_size in send_usb_cmd(). | ||||
| CVE-2025-38550 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Delay put pmc->idev in mld_del_delrec() pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec() does, the reference should be put after ip6_mc_clear_src() return. | ||||
| CVE-2025-38552 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: plug races between subflow fail and subflow creation We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write. | ||||