Total
12469 CVE
CVE | Vendors | Products | Updated | CVSS v3.1 |
---|---|---|---|---|
CVE-2025-37756 | 2025-05-26 | 3.3 Low | ||
In the Linux kernel, the following vulnerability has been resolved: net: tls: explicitly disallow disconnect syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237 | ||||
CVE-2025-37747 | 2025-05-26 | 4.7 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: perf: Fix hang while freeing sigtrap event Perf can hang while freeing a sigtrap event if a related deferred signal hadn't managed to be sent before the file got closed: perf_event_overflow() task_work_add(perf_pending_task) fput() task_work_add(____fput()) task_work_run() ____fput() perf_release() perf_event_release_kernel() _free_event() perf_pending_task_sync() task_work_cancel() -> FAILED rcuwait_wait_event() Once task_work_run() is running, the list of pending callbacks is removed from the task_struct and from this point on task_work_cancel() can't remove any pending and not yet started work items, hence the task_work_cancel() failure and the hang on rcuwait_wait_event(). Task work could be changed to remove one work at a time, so a work running on the current task can always cancel a pending one, however the wait / wake design is still subject to inverted dependencies when remote targets are involved, as pictured by Oleg: T1 T2 fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid); close(fd) close(fd) <IRQ> <IRQ> perf_event_overflow() perf_event_overflow() task_work_add(perf_pending_task) task_work_add(perf_pending_task) </IRQ> </IRQ> fput() fput() task_work_add(____fput()) task_work_add(____fput()) task_work_run() task_work_run() ____fput() ____fput() perf_release() perf_release() perf_event_release_kernel() perf_event_release_kernel() _free_event() _free_event() perf_pending_task_sync() perf_pending_task_sync() rcuwait_wait_event() rcuwait_wait_event() Therefore the only option left is to acquire the event reference count upon queueing the perf task work and release it from the task work, just like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release") but without the leaks it fixed. Some adjustments are necessary to make it work: * A child event might dereference its parent upon freeing. Care must be taken to release the parent last. * Some places assuming the event doesn't have any reference held and therefore can be freed right away must instead put the reference and let the reference counting to its job. | ||||
CVE-2025-23162 | 2025-05-26 | 4.4 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Don't try to trigger a full GT reset if VF VFs don't have access to the GDRST(0x941c) register that driver uses to reset a GT. Attempt to trigger a reset using debugfs: $ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset or due to a hang condition detected by the driver leads to: [ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe] [ ] xe 0000:00:02.1: [drm] GT0: reset queued [ ] xe 0000:00:02.1: [drm] GT0: reset started [ ] ------------[ cut here ]------------ [ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0 [ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] Call Trace: [ ] <TASK> [ ] ? show_regs+0x6c/0x80 [ ] ? __warn+0x93/0x1c0 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? report_bug+0x182/0x1b0 [ ] ? handle_bug+0x6e/0xb0 [ ] ? exc_invalid_op+0x18/0x80 [ ] ? asm_exc_invalid_op+0x1b/0x20 [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe] [ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe] [ ] ? __mutex_unlock_slowpath+0x41/0x2e0 [ ] xe_mmio_write32+0x64/0x150 [xe] [ ] do_gt_reset+0x2f/0xa0 [xe] [ ] gt_reset_worker+0x14e/0x1e0 [xe] [ ] process_one_work+0x21c/0x740 [ ] worker_thread+0x1db/0x3c0 Fix that by sending H2G VF_RESET(0x5507) action instead. | ||||
CVE-2025-22117 | 2025-05-26 | 4.4 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw() Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value. | ||||
CVE-2025-22057 | 2025-05-26 | 5.5 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: net: decrease cached dst counters in dst_release Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") moved decrementing the dst count from dst_destroy to dst_release to avoid accessing already freed data in case of netns dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels are used, this fix is incomplete as the same issue will be seen for cached dsts: Unable to handle kernel paging request at virtual address ffff5aabf6b5c000 Call trace: percpu_counter_add_batch+0x3c/0x160 (P) dst_release+0xec/0x108 dst_cache_destroy+0x68/0xd8 dst_destroy+0x13c/0x168 dst_destroy_rcu+0x1c/0xb0 rcu_do_batch+0x18c/0x7d0 rcu_core+0x174/0x378 rcu_core_si+0x18/0x30 Fix this by invalidating the cache, and thus decrementing cached dst counters, in dst_release too. | ||||
CVE-2025-22021 | 2025-05-26 | 5.5 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: netfilter: socket: Lookup orig tuple for IPv6 SNAT nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to restore the original 5-tuple in case of SNAT, to be able to find the right socket (if any). Then socket_match() can correctly check whether the socket was transparent. However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this conntrack lookup, making xt_socket fail to match on the socket when the packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6. IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as pods' addresses are in the fd00::/8 ULA subnet and need to be replaced with the node's external address. Cilium leverages Envoy to enforce L7 policies, and Envoy uses transparent sockets. Cilium inserts an iptables prerouting rule that matches on `-m socket --transparent` and redirects the packets to localhost, but it fails to match SNATed IPv6 packets due to that missing conntrack lookup. | ||||
CVE-2024-58093 | 2025-05-26 | 5.5 Medium | ||
In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix link state exit during switch upstream function removal Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free"), we would free the ASPM link only after the last function on the bus pertaining to the given link was removed. That was too late. If function 0 is removed before sibling function, link->downstream would point to free'd memory after. After above change, we freed the ASPM parent link state upon any function removal on the bus pertaining to a given link. That is too early. If the link is to a PCIe switch with MFD on the upstream port, then removing functions other than 0 first would free a link which still remains parent_link to the remaining downstream ports. The resulting GPFs are especially frequent during hot-unplug, because pciehp removes devices on the link bus in reverse order. On that switch, function 0 is the virtual P2P bridge to the internal bus. Free exactly when function 0 is removed -- before the parent link is obsolete, but after all subordinate links are gone. [kwilczynski: commit log] | ||||
CVE-2023-46285 | 1 Siemens | 4 Opcenter Quality, Simatic Pcs Neo, Sinumerik Integrate Runmyhmi \/automotive and 1 more | 2025-05-24 | 7.5 High |
A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an improper input validation vulnerability that could allow an attacker to bring the service into a Denial-of-Service state by sending a specifically crafted message to 4004/tcp. The corresponding service is auto-restarted after the crash is detected by a watchdog. | ||||
CVE-2017-7957 | 3 Debian, Redhat, Xstream | 8 Debian Linux, Fuse, Jboss Amq and 5 more | 2025-05-23 | 7.5 High |
XStream through 1.4.9, when a certain denyTypes workaround is not used, mishandles attempts to create an instance of the primitive type 'void' during unmarshalling, leading to a remote application crash, as demonstrated by an xstream.fromXML("<void/>") call. | ||||
CVE-2025-3885 | 2025-05-23 | N/A | ||
Harman Becker MGU21 Bluetooth Improper Input Validation Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of Harman Becker MGU21 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the Bluetooth stack of the BCM89359 chipset. The issue results from the lack of proper validation of Bluetooth frames. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-23942. | ||||
CVE-2024-25010 | 2025-05-23 | 8.8 High | ||
Ericsson RAN Compute and Site Controller 6610 contains in certain configurations a high severity vulnerability where improper input validation could be exploited leading to arbitrary code execution. | ||||
CVE-2025-5114 | 2025-05-23 | 6.3 Medium | ||
A vulnerability has been found in easysoft zentaopms 21.5_20250307 and classified as critical. This vulnerability affects the function Edit of the file /index.php?m=editor&f=edit&filePath=cGhhcjovLy9ldGMvcGFzc3dk&action=edit of the component Committer. The manipulation of the argument filePath leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
CVE-2025-41379 | 2025-05-23 | N/A | ||
The Intellian C700 web panel allows you to add firewall rules. Each of these rules has an associated ID, but there is a problem when adding a new rule, the ID used to create the database entry may be different from the JSON ID. If the rule needs to be deleted later, the system will use the JSON ID and therefore fail. This can be exploited by an attacker to create rules that cannot be deleted unless the device is reset to factory defaults. | ||||
CVE-2025-31672 | 2025-05-23 | 5.3 Medium | ||
Improper Input Validation vulnerability in Apache POI. The issue affects the parsing of OOXML format files like xlsx, docx and pptx. These file formats are basically zip files and it is possible for malicious users to add zip entries with duplicate names (including the path) in the zip. In this case, products reading the affected file could read different data because 1 of the zip entries with the duplicate name is selected over another but different products may choose a different zip entry. This issue affects Apache POI poi-ooxml before 5.4.0. poi-ooxml 5.4.0 has a check that throws an exception if zip entries with duplicate file names are found in the input file. Users are recommended to upgrade to version poi-ooxml 5.4.0, which fixes the issue. Please read https://poi.apache.org/security.html for recommendations about how to use the POI libraries securely. | ||||
CVE-2025-1219 | 2 Php, Redhat | 2 Php, Enterprise Linux | 2025-05-23 | 5.3 Medium |
In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when requesting a HTTP resource using the DOM or SimpleXML extensions, the wrong content-type header is used to determine the charset when the requested resource performs a redirect. This may cause the resulting document to be parsed incorrectly or bypass validations. | ||||
CVE-2025-1217 | 2 Php, Redhat | 2 Php, Enterprise Linux | 2025-05-23 | 3.1 Low |
In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when http request module parses HTTP response obtained from a server, folded headers are parsed incorrectly, which may lead to misinterpreting the response and using incorrect headers, MIME types, etc. | ||||
CVE-2024-12401 | 1 Redhat | 8 Cert Manager, Connectivity Link, Cryostat and 5 more | 2025-05-23 | 4.4 Medium |
A flaw was found in the cert-manager package. This flaw allows an attacker who can modify PEM data that the cert-manager reads, for example, in a Secret resource, to use large amounts of CPU in the cert-manager controller pod to effectively create a denial-of-service (DoS) vector for the cert-manager in the cluster. | ||||
CVE-2022-24280 | 1 Apache | 1 Pulsar | 2025-05-22 | 6.5 Medium |
Improper Input Validation vulnerability in Proxy component of Apache Pulsar allows an attacker to make TCP/IP connection attempts that originate from the Pulsar Proxy's IP address. When the Apache Pulsar Proxy component is used, it is possible to attempt to open TCP/IP connections to any IP address and port that the Pulsar Proxy can connect to. An attacker could use this as a way for DoS attacks that originate from the Pulsar Proxy's IP address. It hasn’t been detected that the Pulsar Proxy authentication can be bypassed. The attacker will have to have a valid token to a properly secured Pulsar Proxy. This issue affects Apache Pulsar Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.2; 2.9.0 to 2.9.1; 2.6.4 and earlier. | ||||
CVE-2022-32797 | 1 Apple | 2 Mac Os X, Macos | 2025-05-22 | 7.1 High |
This issue was addressed with improved checks. This issue is fixed in Security Update 2022-005 Catalina, macOS Big Sur 11.6.8, macOS Monterey 12.5. Processing a maliciously crafted AppleScript binary may result in unexpected termination or disclosure of process memory. | ||||
CVE-2022-32786 | 1 Apple | 2 Mac Os X, Macos | 2025-05-22 | 5.5 Medium |
An issue in the handling of environment variables was addressed with improved validation. This issue is fixed in Security Update 2022-005 Catalina, macOS Big Sur 11.6.8, macOS Monterey 12.5. An app may be able to modify protected parts of the file system. |