Total
582 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53022 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: avoid deadlock in enetc_tx_onestep_tstamp() This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. | ||||
| CVE-2023-53016 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix possible deadlock in rfcomm_sk_state_change syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes. | ||||
| CVE-2022-49759 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: VMCI: Use threaded irqs instead of tasklets The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194 | ||||
| CVE-2022-49742 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: initialize locks earlier in f2fs_fill_super() syzbot is reporting lockdep warning at f2fs_handle_error() [1], for spin_lock(&sbi->error_lock) is called before spin_lock_init() is called. For safe locking in error handling, move initialization of locks (and obvious structures) in f2fs_fill_super() to immediately after memory allocation. | ||||
| CVE-2025-23134 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Don't take register_mutex with copy_from/to_user() The infamous mmap_lock taken in copy_from/to_user() can be often problematic when it's called inside another mutex, as they might lead to deadlocks. In the case of ALSA timer code, the bad pattern is with guard(mutex)(®ister_mutex) that covers copy_from/to_user() -- which was mistakenly introduced at converting to guard(), and it had been carefully worked around in the past. This patch fixes those pieces simply by moving copy_from/to_user() out of the register mutex lock again. | ||||
| CVE-2025-22012 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu" There are reports that the pagetable walker cache coherency is not a given across the spectrum of SDM845/850 devices, leading to lock-ups and resets. It works fine on some devices (like the Dragonboard 845c, but not so much on the Lenovo Yoga C630). This unfortunately looks like a fluke in firmware development, where likely somewhere in the vast hypervisor stack, a change to accommodate for this was only introduced after the initial software release (which often serves as a baseline for products). Revert the change to avoid additional guesswork around crashes. This reverts commit 6b31a9744b8726c69bb0af290f8475a368a4b805. | ||||
| CVE-2022-49850 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix deadlock in nilfs_count_free_blocks() A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time: task 1 task 2 ------ ------ * A file operation * nilfs_truncate() nilfs_get_block() down_read(rwsem A) <-- nilfs_bmap_lookup_contig() ... generic_shutdown_super() nilfs_put_super() * Prepare to write superblock * down_write(rwsem B) <-- nilfs_cleanup_super() * Detect b-tree corruption * nilfs_set_log_cursor() nilfs_bmap_convert_error() nilfs_count_free_blocks() __nilfs_error() down_read(rwsem A) <-- nilfs_set_error() down_write(rwsem B) <-- *** DEADLOCK *** Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section. Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B. Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks(). However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a220180 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced. So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks(). | ||||
| CVE-2024-36962 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs Currently the driver uses local_bh_disable()/local_bh_enable() in its IRQ handler to avoid triggering net_rx_action() softirq on exit from netif_rx(). The net_rx_action() could trigger this driver .start_xmit callback, which is protected by the same lock as the IRQ handler, so calling the .start_xmit from netif_rx() from the IRQ handler critical section protected by the lock could lead to an attempt to claim the already claimed lock, and a hang. The local_bh_disable()/local_bh_enable() approach works only in case the IRQ handler is protected by a spinlock, but does not work if the IRQ handler is protected by mutex, i.e. this works for KS8851 with Parallel bus interface, but not for KS8851 with SPI bus interface. Remove the BH manipulation and instead of calling netif_rx() inside the IRQ handler code protected by the lock, queue all the received SKBs in the IRQ handler into a queue first, and once the IRQ handler exits the critical section protected by the lock, dequeue all the queued SKBs and push them all into netif_rx(). At this point, it is safe to trigger the net_rx_action() softirq, since the netif_rx() call is outside of the lock that protects the IRQ handler. | ||||
| CVE-2021-47582 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Make do_proc_control() and do_proc_bulk() killable The USBDEVFS_CONTROL and USBDEVFS_BULK ioctls invoke usb_start_wait_urb(), which contains an uninterruptible wait with a user-specified timeout value. If timeout value is very large and the device being accessed does not respond in a reasonable amount of time, the kernel will complain about "Task X blocked for more than N seconds", as found in testing by syzbot: INFO: task syz-executor.0:8700 blocked for more than 143 seconds. Not tainted 5.14.0-rc7-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor.0 state:D stack:23192 pid: 8700 ppid: 8455 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4681 [inline] __schedule+0xc07/0x11f0 kernel/sched/core.c:5938 schedule+0x14b/0x210 kernel/sched/core.c:6017 schedule_timeout+0x98/0x2f0 kernel/time/timer.c:1857 do_wait_for_common+0x2da/0x480 kernel/sched/completion.c:85 __wait_for_common kernel/sched/completion.c:106 [inline] wait_for_common kernel/sched/completion.c:117 [inline] wait_for_completion_timeout+0x46/0x60 kernel/sched/completion.c:157 usb_start_wait_urb+0x167/0x550 drivers/usb/core/message.c:63 do_proc_bulk+0x978/0x1080 drivers/usb/core/devio.c:1236 proc_bulk drivers/usb/core/devio.c:1273 [inline] usbdev_do_ioctl drivers/usb/core/devio.c:2547 [inline] usbdev_ioctl+0x3441/0x6b10 drivers/usb/core/devio.c:2713 ... To fix this problem, this patch replaces usbfs's calls to usb_control_msg() and usb_bulk_msg() with special-purpose code that does essentially the same thing (as recommended in the comment for usb_start_wait_urb()), except that it always uses a killable wait and it uses GFP_KERNEL rather than GFP_NOIO. | ||||
| CVE-2024-42266 | 1 Linux | 1 Linux Kernel | 2025-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: make cow_file_range_inline() honor locked_page on error The btrfs buffered write path runs through __extent_writepage() which has some tricky return value handling for writepage_delalloc(). Specifically, when that returns 1, we exit, but for other return values we continue and end up calling btrfs_folio_end_all_writers(). If the folio has been unlocked (note that we check the PageLocked bit at the start of __extent_writepage()), this results in an assert panic like this one from syzbot: BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction. BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:871! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted 6.10.0-syzkaller-05505-gb1bc554e009e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871 Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d 0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8 6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89 RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246 RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001 R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __extent_writepage fs/btrfs/extent_io.c:1597 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline] btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373 do_writepages+0x359/0x870 mm/page-writeback.c:2656 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] __filemap_fdatawrite mm/filemap.c:436 [inline] filemap_flush+0xdf/0x130 mm/filemap.c:463 btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:222 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:877 do_group_exit+0x207/0x2c0 kernel/exit.c:1026 __do_sys_exit_group kernel/exit.c:1037 [inline] __se_sys_exit_group kernel/exit.c:1035 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f075b70c9 Code: Unable to access opcode bytes at 0x7f5f075b709f. I was hitting the same issue by doing hundreds of accelerated runs of generic/475, which also hits IO errors by design. I instrumented that reproducer with bpftrace and found that the undesirable folio_unlock was coming from the following callstack: folio_unlock+5 __process_pages_contig+475 cow_file_range_inline.constprop.0+230 cow_file_range+803 btrfs_run_delalloc_range+566 writepage_delalloc+332 __extent_writepage # inlined in my stacktrace, but I added it here extent_write_cache_pages+622 Looking at the bisected-to pa ---truncated--- | ||||
| CVE-2024-57921 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add a lock when accessing the buddy trim function When running YouTube videos and Steam games simultaneously, the tester found a system hang / race condition issue with the multi-display configuration setting. Adding a lock to the buddy allocator's trim function would be the solution. <log snip> [ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108 [ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250470] Call Trace: [ 7197.250472] <TASK> [ 7197.250475] ? show_regs+0x6d/0x80 [ 7197.250481] ? die_addr+0x37/0xa0 [ 7197.250483] ? exc_general_protection+0x1db/0x480 [ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper] [ 7197.250493] ? asm_exc_general_protection+0x27/0x30 [ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy] [ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy] [ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu] [ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm] [ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm] [ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm] [ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu] [ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu] [ 7197.251025] ? try_wait_for_completion+0x59/0x70 [ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0 [ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70 [ 7197.251037] drm_atomic_helper_commit+0x84/0x160 [ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70 [ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850 [ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251049] drm_ioctl_kernel+0xb9/0x120 [ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251056] drm_ioctl+0x2d4/0x550 [ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ 7197.251186] __x64_sys_ioctl+0xa0/0xf0 [ 7197.251190] x64_sys_call+0x143b/0x25c0 [ 7197.251193] do_syscall_64+0x7f/0x180 [ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu] [ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0 [ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5 (cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) | ||||
| CVE-2024-27435 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix reconnection fail due to reserved tag allocation We found a issue on production environment while using NVMe over RDMA, admin_q reconnect failed forever while remote target and network is ok. After dig into it, we found it may caused by a ABBA deadlock due to tag allocation. In my case, the tag was hold by a keep alive request waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the request maked as idle and will not process before reset success. As fabric_q shares tagset with admin_q, while reconnect remote target, we need a tag for connect command, but the only one reserved tag was held by keep alive command which waiting inside admin_q. As a result, we failed to reconnect admin_q forever. In order to fix this issue, I think we should keep two reserved tags for admin queue. | ||||
| CVE-2024-50212 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: lib: alloc_tag_module_unload must wait for pending kfree_rcu calls Ben Greear reports following splat: ------------[ cut here ]------------ net/netfilter/nf_nat_core.c:1114 module nf_nat func:nf_nat_register_fn has 256 allocated at module unload WARNING: CPU: 1 PID: 10421 at lib/alloc_tag.c:168 alloc_tag_module_unload+0x22b/0x3f0 Modules linked in: nf_nat(-) btrfs ufs qnx4 hfsplus hfs minix vfat msdos fat ... Hardware name: Default string Default string/SKYBAY, BIOS 5.12 08/04/2020 RIP: 0010:alloc_tag_module_unload+0x22b/0x3f0 codetag_unload_module+0x19b/0x2a0 ? codetag_load_module+0x80/0x80 nf_nat module exit calls kfree_rcu on those addresses, but the free operation is likely still pending by the time alloc_tag checks for leaks. Wait for outstanding kfree_rcu operations to complete before checking resolves this warning. Reproducer: unshare -n iptables-nft -t nat -A PREROUTING -p tcp grep nf_nat /proc/allocinfo # will list 4 allocations rmmod nft_chain_nat rmmod nf_nat # will WARN. [[email protected]: add comment] | ||||
| CVE-2024-35793 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugfs: fix wait/cancellation handling during remove Ben Greear further reports deadlocks during concurrent debugfs remove while files are being accessed, even though the code in question now uses debugfs cancellations. Turns out that despite all the review on the locking, we missed completely that the logic is wrong: if the refcount hits zero we can finish (and need not wait for the completion), but if it doesn't we have to trigger all the cancellations. As written, we can _never_ get into the loop triggering the cancellations. Fix this, and explain it better while at it. | ||||
| CVE-2024-35818 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Define the __io_aw() hook as mmiowb() Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation." The mmio in radeon_ring_commit() is protected by a mutex rather than a spinlock, but in the mutex fastpath it behaves similar to spinlock. We can add mmiowb() calls in the radeon driver but the maintainer says he doesn't like such a workaround, and radeon is not the only example of mutex protected mmio. So we should extend the mmiowb tracking system from spinlock to mutex, and maybe other locking primitives. This is not easy and error prone, so we solve it in the architectural code, by simply defining the __io_aw() hook as mmiowb(). And we no longer need to override queued_spin_unlock() so use the generic definition. Without this, we get such an error when run 'glxgears' on weak ordering architectures such as LoongArch: radeon 0000:04:00.0: ring 0 stalled for more than 10324msec radeon 0000:04:00.0: ring 3 stalled for more than 10240msec radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3) radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) | ||||
| CVE-2024-41074 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set object to close if ondemand_id < 0 in copen If copen is maliciously called in the user mode, it may delete the request corresponding to the random id. And the request may have not been read yet. Note that when the object is set to reopen, the open request will be done with the still reopen state in above case. As a result, the request corresponding to this object is always skipped in select_req function, so the read request is never completed and blocks other process. Fix this issue by simply set object to close if its id < 0 in copen. | ||||
| CVE-2023-3750 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Libvirt | 2025-09-26 | 6.5 Medium |
| A flaw was found in libvirt. The virStoragePoolObjListSearch function does not return a locked pool as expected, resulting in a race condition and denial of service when attempting to lock the same object from another thread. This issue could allow clients connecting to the read-only socket to crash the libvirt daemon. | ||||
| CVE-2024-41020 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-25 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: filelock: Fix fcntl/close race recovery compat path When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when fcntl/close race is detected"), I missed that there are two copies of the code I was patching: The normal version, and the version for 64-bit offsets on 32-bit kernels. Thanks to Greg KH for stumbling over this while doing the stable backport... Apply exactly the same fix to the compat path for 32-bit kernels. | ||||
| CVE-2023-52786 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix racy may inline data check in dio write syzbot reports that the following warning from ext4_iomap_begin() triggers as of the commit referenced below: if (WARN_ON_ONCE(ext4_has_inline_data(inode))) return -ERANGE; This occurs during a dio write, which is never expected to encounter an inode with inline data. To enforce this behavior, ext4_dio_write_iter() checks the current inline state of the inode and clears the MAY_INLINE_DATA state flag to either fall back to buffered writes, or enforce that any other writers in progress on the inode are not allowed to create inline data. The problem is that the check for existing inline data and the state flag can span a lock cycle. For example, if the ilock is originally locked shared and subsequently upgraded to exclusive, another writer may have reacquired the lock and created inline data before the dio write task acquires the lock and proceeds. The commit referenced below loosens the lock requirements to allow some forms of unaligned dio writes to occur under shared lock, but AFAICT the inline data check was technically already racy for any dio write that would have involved a lock cycle. Regardless, lift clearing of the state bit to the same lock critical section that checks for preexisting inline data on the inode to close the race. | ||||
| CVE-2023-52689 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Add missing mutex lock around get meter levels As scarlett2_meter_ctl_get() uses meter_level_map[], the data_mutex should be locked while accessing it. | ||||