Filtered by vendor Linux
Subscriptions
Total
16535 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54266 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer() 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. | ||||
| CVE-2023-54272 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a possible null-pointer dereference in ni_clear() In a previous commit c1006bd13146, ni->mi.mrec in ni_write_inode() could be NULL, and thus a NULL check is added for this variable. However, in the same call stack, ni->mi.mrec can be also dereferenced in ni_clear(): ntfs_evict_inode(inode) ni_write_inode(inode, ...) ni = ntfs_i(inode); is_rec_inuse(ni->mi.mrec) -> Add a NULL check by previous commit ni_clear(ntfs_i(inode)) is_rec_inuse(ni->mi.mrec) -> No check Thus, a possible null-pointer dereference may exist in ni_clear(). To fix it, a NULL check is added in this function. | ||||
| CVE-2023-54314 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: af9005: Fix null-ptr-deref in af9005_i2c_xfer In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2023-54241 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: KVM: Fix NULL pointer dereference After commit 45c7e8af4a5e3f0bea4ac209 ("MIPS: Remove KVM_TE support") we get a NULL pointer dereference when creating a KVM guest: [ 146.243409] Starting KVM with MIPS VZ extensions [ 149.849151] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000300, epc == ffffffffc06356ec, ra == ffffffffc063568c [ 149.849177] Oops[#1]: [ 149.849182] CPU: 3 PID: 2265 Comm: qemu-system-mip Not tainted 6.4.0-rc3+ #1671 [ 149.849188] Hardware name: THTF CX TL630 Series/THTF-LS3A4000-7A1000-ML4A, BIOS KL4.1F.TF.D.166.201225.R 12/25/2020 [ 149.849192] $ 0 : 0000000000000000 000000007400cce0 0000000000400004 ffffffff8119c740 [ 149.849209] $ 4 : 000000007400cce1 000000007400cce1 0000000000000000 0000000000000000 [ 149.849221] $ 8 : 000000240058bb36 ffffffff81421ac0 0000000000000000 0000000000400dc0 [ 149.849233] $12 : 9800000102a07cc8 ffffffff80e40e38 0000000000000001 0000000000400dc0 [ 149.849245] $16 : 0000000000000000 9800000106cd0000 9800000106cd0000 9800000100cce000 [ 149.849257] $20 : ffffffffc0632b28 ffffffffc05b31b0 9800000100ccca00 0000000000400000 [ 149.849269] $24 : 9800000106cd09ce ffffffff802f69d0 [ 149.849281] $28 : 9800000102a04000 9800000102a07cd0 98000001106a8000 ffffffffc063568c [ 149.849293] Hi : 00000335b2111e66 [ 149.849295] Lo : 6668d90061ae0ae9 [ 149.849298] epc : ffffffffc06356ec kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849324] ra : ffffffffc063568c kvm_vz_vcpu_setup+0x64/0x328 [kvm] [ 149.849336] Status: 7400cce3 KX SX UX KERNEL EXL IE [ 149.849351] Cause : 1000000c (ExcCode 03) [ 149.849354] BadVA : 0000000000000300 [ 149.849357] PrId : 0014c004 (ICT Loongson-3) [ 149.849360] Modules linked in: kvm nfnetlink_queue nfnetlink_log nfnetlink fuse sha256_generic libsha256 cfg80211 rfkill binfmt_misc vfat fat snd_hda_codec_hdmi input_leds led_class snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_pcm snd_timer snd serio_raw xhci_pci radeon drm_suballoc_helper drm_display_helper xhci_hcd ip_tables x_tables [ 149.849432] Process qemu-system-mip (pid: 2265, threadinfo=00000000ae2982d2, task=0000000038e09ad4, tls=000000ffeba16030) [ 149.849439] Stack : 9800000000000003 9800000100ccca00 9800000100ccc000 ffffffffc062cef4 [ 149.849453] 9800000102a07d18 c89b63a7ab338e00 0000000000000000 ffffffff811a0000 [ 149.849465] 0000000000000000 9800000106cd0000 ffffffff80e59938 98000001106a8920 [ 149.849476] ffffffff80e57f30 ffffffffc062854c ffffffff811a0000 9800000102bf4240 [ 149.849488] ffffffffc05b0000 ffffffff80e3a798 000000ff78000000 000000ff78000010 [ 149.849500] 0000000000000255 98000001021f7de0 98000001023f0078 ffffffff81434000 [ 149.849511] 0000000000000000 0000000000000000 9800000102ae0000 980000025e92ae28 [ 149.849523] 0000000000000000 c89b63a7ab338e00 0000000000000001 ffffffff8119dce0 [ 149.849535] 000000ff78000010 ffffffff804f3d3c 9800000102a07eb0 0000000000000255 [ 149.849546] 0000000000000000 ffffffff8049460c 000000ff78000010 0000000000000255 [ 149.849558] ... [ 149.849565] Call Trace: [ 149.849567] [<ffffffffc06356ec>] kvm_vz_vcpu_setup+0xc4/0x328 [kvm] [ 149.849586] [<ffffffffc062cef4>] kvm_arch_vcpu_create+0x184/0x228 [kvm] [ 149.849605] [<ffffffffc062854c>] kvm_vm_ioctl+0x64c/0xf28 [kvm] [ 149.849623] [<ffffffff805209c0>] sys_ioctl+0xc8/0x118 [ 149.849631] [<ffffffff80219eb0>] syscall_common+0x34/0x58 The root cause is the deletion of kvm_mips_commpage_init() leaves vcpu ->arch.cop0 NULL. So fix it by making cop0 from a pointer to an embedded object. | ||||
| CVE-2023-54242 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: Fix division by zero error on zero wsum When the weighted sum is zero the calculation of limit causes a division by zero error. Fix this by continuing to the next level. This was discovered by running as root: stress-ng --ioprio 0 Fixes divison by error oops: [ 521.450556] divide error: 0000 [#1] SMP NOPTI [ 521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1 [ 521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400 [ 521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44 [ 521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046 [ 521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000 [ 521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978 [ 521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0 [ 521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18 [ 521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970 [ 521.454549] FS: 00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000 [ 521.454912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0 [ 521.455491] PKRU: 55555554 [ 521.455619] Call Trace: [ 521.455736] <TASK> [ 521.455837] ? bfq_request_merge+0x3a/0xc0 [ 521.456027] ? elv_merge+0x115/0x140 [ 521.456191] bfq_limit_depth+0xc8/0x240 [ 521.456366] __blk_mq_alloc_requests+0x21a/0x2c0 [ 521.456577] blk_mq_submit_bio+0x23c/0x6c0 [ 521.456766] __submit_bio+0xb8/0x140 [ 521.457236] submit_bio_noacct_nocheck+0x212/0x300 [ 521.457748] submit_bio_noacct+0x1a6/0x580 [ 521.458220] submit_bio+0x43/0x80 [ 521.458660] ext4_io_submit+0x23/0x80 [ 521.459116] ext4_do_writepages+0x40a/0xd00 [ 521.459596] ext4_writepages+0x65/0x100 [ 521.460050] do_writepages+0xb7/0x1c0 [ 521.460492] __filemap_fdatawrite_range+0xa6/0x100 [ 521.460979] file_write_and_wait_range+0xbf/0x140 [ 521.461452] ext4_sync_file+0x105/0x340 [ 521.461882] __x64_sys_fsync+0x67/0x100 [ 521.462305] ? syscall_exit_to_user_mode+0x2c/0x1c0 [ 521.462768] do_syscall_64+0x3b/0xc0 [ 521.463165] entry_SYSCALL_64_after_hwframe+0x5a/0xc4 [ 521.463621] RIP: 0033:0x5640b6c56590 [ 521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c | ||||
| CVE-2023-54250 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: avoid out of bounds access in decode_preauth_ctxt() Confirm that the accessed pneg_ctxt->HashAlgorithms address sits within the SMB request boundary; deassemble_neg_contexts() only checks that the eight byte smb2_neg_context header + (client controlled) DataLength are within the packet boundary, which is insufficient. Checking for sizeof(struct smb2_preauth_neg_context) is overkill given that the type currently assumes SMB311_SALT_SIZE bytes of trailing Salt. | ||||
| CVE-2023-54251 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX. syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: | ||||
| CVE-2023-54253 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: set page extent mapped after read_folio in relocate_one_page One of the CI runs triggered the following panic assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 sp : ffff800093213720 x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000 x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880 x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028 x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000 x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8 x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_set_dirty+0x38/0xa0 btrfs_page_set_dirty+0x58/0x88 relocate_one_page+0x204/0x5f0 relocate_file_extent_cluster+0x11c/0x180 relocate_data_extent+0xd0/0xf8 relocate_block_group+0x3d0/0x4e8 btrfs_relocate_block_group+0x2d8/0x490 btrfs_relocate_chunk+0x54/0x1a8 btrfs_balance+0x7f4/0x1150 btrfs_ioctl+0x10f0/0x20b8 __arm64_sys_ioctl+0x120/0x11d8 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x158 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000) This is the same problem outlined in 17b17fcd6d44 ("btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the fix is the same. I originally looked for the same pattern elsewhere in our code, but mistakenly skipped over this code because I saw the page cache readahead before we set_page_extent_mapped, not realizing that this was only in the !page case, that we can still end up with a !uptodate page and then do the btrfs_read_folio further down. The fix here is the same as the above mentioned patch, move the set_page_extent_mapped call to after the btrfs_read_folio() block to make sure that we have the subpage blocksize stuff setup properly before using the page. | ||||
| CVE-2023-54257 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix a memory corruption in extended buffer descriptor mode For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options. Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma: [ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]--- [ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.15302 ---truncated--- | ||||
| CVE-2023-54260 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix lost destroy smbd connection when MR allocate failed If the MR allocate failed, the smb direct connection info is NULL, then smbd_destroy() will directly return, then the connection info will be leaked. Let's set the smb direct connection info to the server before call smbd_destroy(). | ||||
| CVE-2023-54263 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP Fixes OOPS on boards with ANX9805 DP encoders. | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2023-54320 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2() Function amd_pmc_stb_debugfs_open_v2() may be called when the STB debug mechanism enabled. When amd_pmc_send_cmd() fails, the 'buf' needs to be released. | ||||
| CVE-2023-54322 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: set __exception_irq_entry with __irq_entry as a default filter_irq_stacks() is supposed to cut entries which are related irq entries from its call stack. And in_irqentry_text() which is called by filter_irq_stacks() uses __irqentry_text_start/end symbol to find irq entries in callstack. But it doesn't work correctly as without "CONFIG_FUNCTION_GRAPH_TRACER", arm64 kernel doesn't include gic_handle_irq which is entry point of arm64 irq between __irqentry_text_start and __irqentry_text_end as we discussed in below link. https://lore.kernel.org/all/CACT4Y+aReMGLYua2rCLHgFpS9io5cZC04Q8GLs-uNmrn1ezxYQ@mail.gmail.com/#t This problem can makes unintentional deep call stack entries especially in KASAN enabled situation as below. [ 2479.383395]I[0:launcher-loader: 1719] Stack depot reached limit capacity [ 2479.383538]I[0:launcher-loader: 1719] WARNING: CPU: 0 PID: 1719 at lib/stackdepot.c:129 __stack_depot_save+0x464/0x46c [ 2479.385693]I[0:launcher-loader: 1719] pstate: 624000c5 (nZCv daIF +PAN -UAO +TCO -DIT -SSBS BTYPE=--) [ 2479.385724]I[0:launcher-loader: 1719] pc : __stack_depot_save+0x464/0x46c [ 2479.385751]I[0:launcher-loader: 1719] lr : __stack_depot_save+0x460/0x46c [ 2479.385774]I[0:launcher-loader: 1719] sp : ffffffc0080073c0 [ 2479.385793]I[0:launcher-loader: 1719] x29: ffffffc0080073e0 x28: ffffffd00b78a000 x27: 0000000000000000 [ 2479.385839]I[0:launcher-loader: 1719] x26: 000000000004d1dd x25: ffffff891474f000 x24: 00000000ca64d1dd [ 2479.385882]I[0:launcher-loader: 1719] x23: 0000000000000200 x22: 0000000000000220 x21: 0000000000000040 [ 2479.385925]I[0:launcher-loader: 1719] x20: ffffffc008007440 x19: 0000000000000000 x18: 0000000000000000 [ 2479.385969]I[0:launcher-loader: 1719] x17: 2065726568207475 x16: 000000000000005e x15: 2d2d2d2d2d2d2d20 [ 2479.386013]I[0:launcher-loader: 1719] x14: 5d39313731203a72 x13: 00000000002f6b30 x12: 00000000002f6af8 [ 2479.386057]I[0:launcher-loader: 1719] x11: 00000000ffffffff x10: ffffffb90aacf000 x9 : e8a74a6c16008800 [ 2479.386101]I[0:launcher-loader: 1719] x8 : e8a74a6c16008800 x7 : 00000000002f6b30 x6 : 00000000002f6af8 [ 2479.386145]I[0:launcher-loader: 1719] x5 : ffffffc0080070c8 x4 : ffffffd00b192380 x3 : ffffffd0092b313c [ 2479.386189]I[0:launcher-loader: 1719] x2 : 0000000000000001 x1 : 0000000000000004 x0 : 0000000000000022 [ 2479.386231]I[0:launcher-loader: 1719] Call trace: [ 2479.386248]I[0:launcher-loader: 1719] __stack_depot_save+0x464/0x46c [ 2479.386273]I[0:launcher-loader: 1719] kasan_save_stack+0x58/0x70 [ 2479.386303]I[0:launcher-loader: 1719] save_stack_info+0x34/0x138 [ 2479.386331]I[0:launcher-loader: 1719] kasan_save_free_info+0x18/0x24 [ 2479.386358]I[0:launcher-loader: 1719] ____kasan_slab_free+0x16c/0x170 [ 2479.386385]I[0:launcher-loader: 1719] __kasan_slab_free+0x10/0x20 [ 2479.386410]I[0:launcher-loader: 1719] kmem_cache_free+0x238/0x53c [ 2479.386435]I[0:launcher-loader: 1719] mempool_free_slab+0x1c/0x28 [ 2479.386460]I[0:launcher-loader: 1719] mempool_free+0x7c/0x1a0 [ 2479.386484]I[0:launcher-loader: 1719] bvec_free+0x34/0x80 [ 2479.386514]I[0:launcher-loader: 1719] bio_free+0x60/0x98 [ 2479.386540]I[0:launcher-loader: 1719] bio_put+0x50/0x21c [ 2479.386567]I[0:launcher-loader: 1719] f2fs_write_end_io+0x4ac/0x4d0 [ 2479.386594]I[0:launcher-loader: 1719] bio_endio+0x2dc/0x300 [ 2479.386622]I[0:launcher-loader: 1719] __dm_io_complete+0x324/0x37c [ 2479.386650]I[0:launcher-loader: 1719] dm_io_dec_pending+0x60/0xa4 [ 2479.386676]I[0:launcher-loader: 1719] clone_endio+0xf8/0x2f0 [ 2479.386700]I[0:launcher-loader: 1719] bio_endio+0x2dc/0x300 [ 2479.386727]I[0:launcher-loader: 1719] blk_update_request+0x258/0x63c [ 2479.386754]I[0:launcher-loader: 1719] scsi_end_request+0x50/0x304 [ 2479.386782]I[0:launcher-loader: 1719] scsi_io_completion+0x88/0x160 [ 2479.386808]I[0:launcher-loader: 1719] scsi_finish_command+0x17c/0x194 [ 2479.386833]I ---truncated--- | ||||
| CVE-2023-54326 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: pci_endpoint_test: Free IRQs before removing the device In pci_endpoint_test_remove(), freeing the IRQs after removing the device creates a small race window for IRQs to be received with the test device memory already released, causing the IRQ handler to access invalid memory, resulting in an oops. Free the device IRQs before removing the device to avoid this issue. | ||||
| CVE-2023-54248 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add check for kmemdup Since the kmemdup may return NULL pointer, it should be better to add check for the return value in order to avoid NULL pointer dereference. | ||||
| CVE-2023-54252 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix memory leaks when parsing ThinkStation WMI strings My previous commit introduced a memory leak where the item allocated from tlmi_setting was not freed. This commit also renames it to avoid confusion with the similarly name variable in the same function. | ||||
| CVE-2023-54280 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential race when tree connecting ipc Protect access of TCP_Server_Info::hostname when building the ipc tree name as it might get freed in cifsd thread and thus causing an use-after-free bug in __tree_connect_dfs_target(). Also, while at it, update status of IPC tcon on success and then avoid any extra tree connects. | ||||
| CVE-2023-54294 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix memleak of md thread In raid10_run(), if setup_conf() succeed and raid10_run() failed before setting 'mddev->thread', then in the error path 'conf->thread' is not freed. Fix the problem by setting 'mddev->thread' right after setup_conf(). | ||||
| CVE-2023-54301 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix leak in `brcmuart_probe` Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. | ||||