{"dataType": "CVE_RECORD", "cveMetadata": {"cveId": "CVE-2024-26931", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-02-19T14:20:24.195Z", "datePublished": "2024-05-01T05:17:14.823Z", "dateUpdated": "2026-01-05T10:35:02.675Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-01-05T10:35:02.675Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Fix command flush on cable pull\n\nSystem crash due to command failed to flush back to SCSI layer.\n\n BUG: unable to handle kernel NULL pointer dereference at 0000000000000000\n PGD 0 P4D 0\n Oops: 0000 [#1] SMP NOPTI\n CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1\n Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021\n Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]\n RIP: 0010:__wake_up_common+0x4c/0x190\n Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75\n RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086\n RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000\n RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320\n RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8\n R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20\n R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000\n FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000\n CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0\n DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\n DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400\n PKRU: 55555554\n Call Trace:\n __wake_up_common_lock+0x7c/0xc0\n qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]\n qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0\n ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]\n qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.\n ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]\n qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1\n ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]\n qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0\n ? __switch_to+0x10c/0x450\n ? process_one_work+0x1a7/0x360\n qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.\n ? worker_thread+0x1ce/0x390\n ? create_worker+0x1a0/0x1a0\n qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70\n ? kthread+0x10a/0x120\n qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8\n ? set_kthread_struct+0x40/0x40\n qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.\n ? ret_from_fork+0x1f/0x40\n qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout\n\nThe system was under memory stress where driver was not able to allocate an\nSRB to carry out error recovery of cable pull. The failure to flush causes\nupper layer to start modifying scsi_cmnd. When the system frees up some\nmemory, the subsequent cable pull trigger another command flush. At this\npoint the driver access a null pointer when attempting to DMA unmap the\nSGL.\n\nAdd a check to make sure commands are flush back on session tear down to\nprevent the null pointer access."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/scsi/qla2xxx/qla_target.c"], "versions": [{"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "b73377124f56d2fec154737c2f8d2e839c237d5a", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "d7a68eee87b05d4e29419e6f151aef99314970a9", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "67b2d35853c2da25a8ca1c4190a5e96d3083c2ac", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "09c0ac18cac206ed1218b1fe6c1a0918e5ea9211", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "8de1584ec4fe0ebea33c273036e7e0a05e65c81d", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "8f0d32004e3a572bb77e6c11c2797c87f8c9703d", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "ec7587eef003cab15a13446d67c3adb88146a150", "status": "affected", "versionType": "git"}, {"version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "a27d4d0e7de305def8a5098a614053be208d1aa1", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/scsi/qla2xxx/qla_target.c"], "versions": [{"version": "4.11", "status": "affected"}, {"version": "0", "lessThan": "4.11", "status": "unaffected", "versionType": "semver"}, {"version": "4.19.312", "lessThanOrEqual": "4.19.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.4.274", "lessThanOrEqual": "5.4.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.215", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.154", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.84", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.24", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.7.12", "lessThanOrEqual": "6.7.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.8.3", "lessThanOrEqual": "6.8.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.9", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "4.19.312"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "5.4.274"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "5.10.215"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "5.15.154"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "6.1.84"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "6.6.24"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "6.7.12"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "6.8.3"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "4.11", "versionEndExcluding": "6.9"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/b73377124f56d2fec154737c2f8d2e839c237d5a"}, {"url": "https://git.kernel.org/stable/c/d7a68eee87b05d4e29419e6f151aef99314970a9"}, {"url": "https://git.kernel.org/stable/c/67b2d35853c2da25a8ca1c4190a5e96d3083c2ac"}, {"url": "https://git.kernel.org/stable/c/a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a"}, {"url": "https://git.kernel.org/stable/c/09c0ac18cac206ed1218b1fe6c1a0918e5ea9211"}, {"url": "https://git.kernel.org/stable/c/8de1584ec4fe0ebea33c273036e7e0a05e65c81d"}, {"url": "https://git.kernel.org/stable/c/8f0d32004e3a572bb77e6c11c2797c87f8c9703d"}, {"url": "https://git.kernel.org/stable/c/ec7587eef003cab15a13446d67c3adb88146a150"}, {"url": "https://git.kernel.org/stable/c/a27d4d0e7de305def8a5098a614053be208d1aa1"}], "title": "scsi: qla2xxx: Fix command flush on cable pull", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-02T00:21:05.629Z"}, "title": "CVE Program Container", "references": [{"url": "https://git.kernel.org/stable/c/b73377124f56d2fec154737c2f8d2e839c237d5a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/d7a68eee87b05d4e29419e6f151aef99314970a9", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/67b2d35853c2da25a8ca1c4190a5e96d3083c2ac", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/09c0ac18cac206ed1218b1fe6c1a0918e5ea9211", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/8de1584ec4fe0ebea33c273036e7e0a05e65c81d", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/8f0d32004e3a572bb77e6c11c2797c87f8c9703d", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/ec7587eef003cab15a13446d67c3adb88146a150", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/a27d4d0e7de305def8a5098a614053be208d1aa1", "tags": ["x_transferred"]}, {"url": "https://lists.debian.org/debian-lts-announce/2024/06/msg00017.html", "tags": ["x_transferred"]}, {"url": "https://lists.debian.org/debian-lts-announce/2024/06/msg00020.html", "tags": ["x_transferred"]}]}, {"metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2024-26931", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-09-10T15:45:55.384223Z"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-09-11T17:33:53.290Z"}}]}, "dataVersion": "5.2"}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CVE Program Container", "references": [{"url": "https://git.kernel.org/stable/c/b73377124f56d2fec154737c2f8d2e839c237d5a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/d7a68eee87b05d4e29419e6f151aef99314970a9", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/67b2d35853c2da25a8ca1c4190a5e96d3083c2ac", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/09c0ac18cac206ed1218b1fe6c1a0918e5ea9211", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/8de1584ec4fe0ebea33c273036e7e0a05e65c81d", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/8f0d32004e3a572bb77e6c11c2797c87f8c9703d", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/ec7587eef003cab15a13446d67c3adb88146a150", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/a27d4d0e7de305def8a5098a614053be208d1aa1", "tags": ["x_transferred"]}, {"url": "https://lists.debian.org/debian-lts-announce/2024/06/msg00017.html", "tags": ["x_transferred"]}, {"url": "https://lists.debian.org/debian-lts-announce/2024/06/msg00020.html", "tags": ["x_transferred"]}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-02T00:21:05.629Z"}}, {"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2024-26931", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-09-10T15:45:55.384223Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-09-11T12:42:19.436Z"}}], "cna": {"title": "scsi: qla2xxx: Fix command flush on cable pull", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "b73377124f56d2fec154737c2f8d2e839c237d5a", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "d7a68eee87b05d4e29419e6f151aef99314970a9", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "67b2d35853c2da25a8ca1c4190a5e96d3083c2ac", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "09c0ac18cac206ed1218b1fe6c1a0918e5ea9211", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "8de1584ec4fe0ebea33c273036e7e0a05e65c81d", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "8f0d32004e3a572bb77e6c11c2797c87f8c9703d", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "ec7587eef003cab15a13446d67c3adb88146a150", "versionType": "git"}, {"status": "affected", "version": "726b85487067d7f5b23495bc33c484b8517c4074", "lessThan": "a27d4d0e7de305def8a5098a614053be208d1aa1", "versionType": "git"}], "programFiles": ["drivers/scsi/qla2xxx/qla_target.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "4.11"}, {"status": "unaffected", "version": "0", "lessThan": "4.11", "versionType": "semver"}, {"status": "unaffected", "version": "4.19.312", "versionType": "semver", "lessThanOrEqual": "4.19.*"}, {"status": "unaffected", "version": "5.4.274", "versionType": "semver", "lessThanOrEqual": "5.4.*"}, {"status": "unaffected", "version": "5.10.215", "versionType": "semver", "lessThanOrEqual": "5.10.*"}, {"status": "unaffected", "version": "5.15.154", "versionType": "semver", "lessThanOrEqual": "5.15.*"}, {"status": "unaffected", "version": "6.1.84", "versionType": "semver", "lessThanOrEqual": "6.1.*"}, {"status": "unaffected", "version": "6.6.24", "versionType": "semver", "lessThanOrEqual": "6.6.*"}, {"status": "unaffected", "version": "6.7.12", "versionType": "semver", "lessThanOrEqual": "6.7.*"}, {"status": "unaffected", "version": "6.8.3", "versionType": "semver", "lessThanOrEqual": "6.8.*"}, {"status": "unaffected", "version": "6.9", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/scsi/qla2xxx/qla_target.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/b73377124f56d2fec154737c2f8d2e839c237d5a"}, {"url": "https://git.kernel.org/stable/c/d7a68eee87b05d4e29419e6f151aef99314970a9"}, {"url": "https://git.kernel.org/stable/c/67b2d35853c2da25a8ca1c4190a5e96d3083c2ac"}, {"url": "https://git.kernel.org/stable/c/a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a"}, {"url": "https://git.kernel.org/stable/c/09c0ac18cac206ed1218b1fe6c1a0918e5ea9211"}, {"url": "https://git.kernel.org/stable/c/8de1584ec4fe0ebea33c273036e7e0a05e65c81d"}, {"url": "https://git.kernel.org/stable/c/8f0d32004e3a572bb77e6c11c2797c87f8c9703d"}, {"url": "https://git.kernel.org/stable/c/ec7587eef003cab15a13446d67c3adb88146a150"}, {"url": "https://git.kernel.org/stable/c/a27d4d0e7de305def8a5098a614053be208d1aa1"}], "x_generator": {"engine": "bippy-1.2.0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Fix command flush on cable pull\n\nSystem crash due to command failed to flush back to SCSI layer.\n\n BUG: unable to handle kernel NULL pointer dereference at 0000000000000000\n PGD 0 P4D 0\n Oops: 0000 [#1] SMP NOPTI\n CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1\n Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021\n Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]\n RIP: 0010:__wake_up_common+0x4c/0x190\n Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75\n RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086\n RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000\n RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320\n RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8\n R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20\n R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000\n FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000\n CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0\n DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\n DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400\n PKRU: 55555554\n Call Trace:\n __wake_up_common_lock+0x7c/0xc0\n qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]\n qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0\n ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]\n qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.\n ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]\n qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1\n ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]\n qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0\n ? __switch_to+0x10c/0x450\n ? process_one_work+0x1a7/0x360\n qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.\n ? worker_thread+0x1ce/0x390\n ? create_worker+0x1a0/0x1a0\n qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70\n ? kthread+0x10a/0x120\n qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8\n ? set_kthread_struct+0x40/0x40\n qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.\n ? ret_from_fork+0x1f/0x40\n qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout\n\nThe system was under memory stress where driver was not able to allocate an\nSRB to carry out error recovery of cable pull. The failure to flush causes\nupper layer to start modifying scsi_cmnd. When the system frees up some\nmemory, the subsequent cable pull trigger another command flush. At this\npoint the driver access a null pointer when attempting to DMA unmap the\nSGL.\n\nAdd a check to make sure commands are flush back on session tear down to\nprevent the null pointer access."}], "cpeApplicability": [{"nodes": [{"negate": false, "cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "4.19.312", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.4.274", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.10.215", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "5.15.154", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.1.84", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.6.24", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.7.12", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.8.3", "versionStartIncluding": "4.11"}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "vulnerable": true, "versionEndExcluding": "6.9", "versionStartIncluding": "4.11"}], "operator": "OR"}]}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2026-01-05T10:35:02.675Z"}}}, "cveMetadata": {"cveId": "CVE-2024-26931", "state": "PUBLISHED", "dateUpdated": "2026-01-05T10:35:02.675Z", "dateReserved": "2024-02-19T14:20:24.195Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2024-05-01T05:17:14.823Z", "assignerShortName": "Linux"}, "dataVersion": "5.2"}

{"descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: qla2xxx: Fix command flush on cable pull\n\nSystem crash due to command failed to flush back to SCSI layer.\n\n BUG: unable to handle kernel NULL pointer dereference at 0000000000000000\n PGD 0 P4D 0\n Oops: 0000 [#1] SMP NOPTI\n CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1\n Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021\n Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]\n RIP: 0010:__wake_up_common+0x4c/0x190\n Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75\n RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086\n RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000\n RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320\n RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8\n R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20\n R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000\n FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000\n CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0\n DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\n DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400\n PKRU: 55555554\n Call Trace:\n __wake_up_common_lock+0x7c/0xc0\n qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]\n qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0\n ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]\n qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.\n ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]\n qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1\n ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]\n qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0\n ? __switch_to+0x10c/0x450\n ? process_one_work+0x1a7/0x360\n qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.\n ? worker_thread+0x1ce/0x390\n ? create_worker+0x1a0/0x1a0\n qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70\n ? kthread+0x10a/0x120\n qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8\n ? set_kthread_struct+0x40/0x40\n qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.\n ? ret_from_fork+0x1f/0x40\n qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout\n\nThe system was under memory stress where driver was not able to allocate an\nSRB to carry out error recovery of cable pull. The failure to flush causes\nupper layer to start modifying scsi_cmnd. When the system frees up some\nmemory, the subsequent cable pull trigger another command flush. At this\npoint the driver access a null pointer when attempting to DMA unmap the\nSGL.\n\nAdd a check to make sure commands are flush back on session tear down to\nprevent the null pointer access."}, {"lang": "es", "value": "En el kernel de Linux, se resolvi\u00f3 la siguiente vulnerabilidad: scsi: qla2xxx: corrige el vaciado del comando al tirar del cable. Fallo del sistema debido a que el comando no pudo volver a vaciarse a la capa SCSI. ERROR: no se puede manejar la desreferencia del puntero NULL del kernel en 0000000000000000 PGD 0 P4D 0 Ups: 0000 [#1] SMP NOPTI CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: cargado Contaminado: G OE ------ --- - - 4.18.0-372.9.1.el8.x86_64 #1 Nombre de hardware: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/09/2021 Cola de trabajo: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010: __wake_up_common+0x4c/0x190 C\u00f3digo: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 c3 0f 84 f0 00 00 00 &lt; 49&gt; 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 00000000000000000 RDX: 0000000000000001 RSI: 00000000000000003 RDI: ffff8b08d3b26320 RBP : 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 00000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Seguimiento de llamadas: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+ 0x355/0x4c0 [qla2xxx] qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 desde el puerto 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 cerrar sesi\u00f3n 1 mantener 0 els_logo 0 ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 el estado pas\u00f3 de EN L\u00cdNEA a PERDIDO - portid=010200. ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. informe ffff8ae598122000 roles 1 ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 desde el puerto 21: 32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 cerrar sesi\u00f3n 1 mantener 0 els_logo 0? __cambiar_a+0x10c/0x450 ? Process_one_work+0x1a7/0x360 qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 el estado pas\u00f3 de EN L\u00cdNEA a PERDIDO - portid=010201. ? hilo_trabajador+0x1ce/0x390? create_worker+0x1a0/0x1a0 qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. informe ffff8ae3b2312800 roles 70 ? kthread+0x10a/0x120 qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: cancelar el registro del puerto remoto en ffff8ae14801e000 21320102adf7eeb8? set_kthread_struct+0x40/0x40 qla2xxx [0000:12:00.1]-2110:3: Remoteport_delete de ffff8ae14801e000 21320102adf7eeb8 completado. ? ret_from_fork+0x1f/0x40 qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: esperando sess ffff8ae14801e000 cerrar sesi\u00f3n El sistema estaba bajo estr\u00e9s de memoria y el controlador no pudo asignar un SRB para llevar a cabo la recuperaci\u00f3n de errores de extracci\u00f3n del cable. La falla al vaciar hace que la capa superior comience a modificar scsi_cmnd. Cuando el sistema libera algo de memoria, el siguiente tir\u00f3n del cable activa otro comando de descarga. En este punto, el controlador accede a un puntero nulo cuando intenta desasignar DMA el SGL. Agregue una verificaci\u00f3n para asegurarse de que los comandos se vuelvan a borrar al cerrar la sesi\u00f3n para evitar el acceso al puntero nulo."}], "id": "CVE-2024-26931", "lastModified": "2024-11-21T09:03:24.837", "metrics": {}, "published": "2024-05-01T06:15:07.673", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/09c0ac18cac206ed1218b1fe6c1a0918e5ea9211"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/67b2d35853c2da25a8ca1c4190a5e96d3083c2ac"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/8de1584ec4fe0ebea33c273036e7e0a05e65c81d"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/8f0d32004e3a572bb77e6c11c2797c87f8c9703d"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/a27d4d0e7de305def8a5098a614053be208d1aa1"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/b73377124f56d2fec154737c2f8d2e839c237d5a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/d7a68eee87b05d4e29419e6f151aef99314970a9"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/ec7587eef003cab15a13446d67c3adb88146a150"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/09c0ac18cac206ed1218b1fe6c1a0918e5ea9211"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/67b2d35853c2da25a8ca1c4190a5e96d3083c2ac"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/8de1584ec4fe0ebea33c273036e7e0a05e65c81d"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/8f0d32004e3a572bb77e6c11c2797c87f8c9703d"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/a27d4d0e7de305def8a5098a614053be208d1aa1"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/a859f6a8f4234b8ef62862bf7a92f1af5f8cd47a"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/b73377124f56d2fec154737c2f8d2e839c237d5a"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/d7a68eee87b05d4e29419e6f151aef99314970a9"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/ec7587eef003cab15a13446d67c3adb88146a150"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://lists.debian.org/debian-lts-announce/2024/06/msg00017.html"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://lists.debian.org/debian-lts-announce/2024/06/msg00020.html"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Awaiting Analysis"}

{"affected_release": [{"advisory": "RHSA-2024:5101", "cpe": "cpe:/o:redhat:enterprise_linux:8", "package": "kernel-0:4.18.0-553.16.1.el8_10", "product_name": "Red Hat Enterprise Linux 8", "release_date": "2024-08-08T00:00:00Z"}, {"advisory": "RHSA-2024:6997", "cpe": "cpe:/a:redhat:enterprise_linux:9", "package": "kernel-0:5.14.0-427.37.1.el9_4", "product_name": "Red Hat Enterprise Linux 9", "release_date": "2024-09-24T00:00:00Z"}, {"advisory": "RHSA-2024:6997", "cpe": "cpe:/o:redhat:enterprise_linux:9", "package": "kernel-0:5.14.0-427.37.1.el9_4", "product_name": "Red Hat Enterprise Linux 9", "release_date": "2024-09-24T00:00:00Z"}, {"advisory": "RHSA-2024:4823", "cpe": "cpe:/a:redhat:rhel_eus:9.2", "package": "kernel-0:5.14.0-284.75.1.el9_2", "product_name": "Red Hat Enterprise Linux 9.2 Extended Update Support", "release_date": "2024-07-24T00:00:00Z"}, {"advisory": "RHSA-2024:4831", "cpe": "cpe:/a:redhat:rhel_eus:9.2::nfv", "package": "kernel-rt-0:5.14.0-284.75.1.rt14.360.el9_2", "product_name": "Red Hat Enterprise Linux 9.2 Extended Update Support", "release_date": "2024-07-24T00:00:00Z"}], "bugzilla": {"description": "kernel: scsi: qla2xxx: Fix command flush on cable pull", "id": "2278245", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2278245"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.1", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H", "status": "verified"}, "cwe": "CWE-476", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nscsi: qla2xxx: Fix command flush on cable pull\nSystem crash due to command failed to flush back to SCSI layer.\nBUG: unable to handle kernel NULL pointer dereference at 0000000000000000\nPGD 0 P4D 0\nOops: 0000 [#1] SMP NOPTI\nCPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1\nHardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021\nWorkqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]\nRIP: 0010:__wake_up_common+0x4c/0x190\nCode: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75\nRSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086\nRAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000\nRDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320\nRBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8\nR10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20\nR13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000\nFS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000\nCS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033\nCR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0\nDR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000\nDR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400\nPKRU: 55555554\nCall Trace:\n__wake_up_common_lock+0x7c/0xc0\nqla_nvme_ls_req+0x355/0x4c0 [qla2xxx]\nqla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0\n? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]\nqla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.\n? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]\nqla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1\n? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]\nqla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0\n? __switch_to+0x10c/0x450\n? process_one_work+0x1a7/0x360\nqla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.\n? worker_thread+0x1ce/0x390\n? create_worker+0x1a0/0x1a0\nqla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70\n? kthread+0x10a/0x120\nqla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8\n? set_kthread_struct+0x40/0x40\nqla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.\n? ret_from_fork+0x1f/0x40\nqla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout\nThe system was under memory stress where driver was not able to allocate an\nSRB to carry out error recovery of cable pull. The failure to flush causes\nupper layer to start modifying scsi_cmnd. When the system frees up some\nmemory, the subsequent cable pull trigger another command flush. At this\npoint the driver access a null pointer when attempting to DMA unmap the\nSGL.\nAdd a check to make sure commands are flush back on session tear down to\nprevent the null pointer access.", "A flaw was found in the qla2xxx module in the Linux kernel. A NULL pointer dereference can be triggered when the system is under memory stress and the driver cannot allocate memory to handle the error recovery of cable pull, causing a system crash and a denial of service."], "mitigation": {"lang": "en:us", "value": "Mitigation for this issue is either not available or the currently available options do not meet the Red Hat Product Security criteria comprising ease of use and deployment, applicability to widespread installation base or stability."}, "name": "CVE-2024-26931", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Out of support scope", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-05-01T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2024-26931\nhttps://nvd.nist.gov/vuln/detail/CVE-2024-26931\nhttps://lore.kernel.org/linux-cve-announce/2024050123-CVE-2024-26931-01d9@gregkh/T"], "statement": "This vulnerability can only be triggered in out-of-memory conditions. For this reason, it was rated with a Moderate severity.", "threat_severity": "Moderate"}