Total
210 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-12736 | 1 Siemens | 15 Ruggedcom, Ruggedcom Ros, Ruggedcom Rsl910 and 12 more | 2025-08-12 | 8.8 High |
| After initial configuration, the Ruggedcom Discovery Protocol (RCDP) is still able to write to the device under certain conditions. This could allow an attacker located in the adjacent network of the targeted device to perform unauthorized administrative actions. | ||||
| CVE-2025-44647 | 1 Trendnet | 2 Tew-wlc100p, Tew-wlc100p Firmware | 2025-08-07 | 7.3 High |
| In TRENDnet TEW-WLC100P 2.03b03, the i_dont_care_about_security_and_use_aggressive_mode_psk option is enabled in the strongSwan configuration file, so that IKE Responders are allowed to use IKEv1 Aggressive Mode with Pre-Shared Keys to conduct offline attacks on the openly transmitted hash of the PSK. | ||||
| CVE-2025-27443 | 1 Zoom | 4 Meeting Software Development Kit, Rooms, Rooms Controller and 1 more | 2025-08-01 | 2.8 Low |
| Insecure default variable initialization in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a loss of integrity via local access. | ||||
| CVE-2025-54127 | 2 Haxtheweb, Psu | 2 Haxcms-nodejs, Haxcms-nodejs | 2025-07-30 | 9.8 Critical |
| HAXcms with nodejs backend allows users to start the server in any HAXsite or HAXcms instance. In versions 11.0.6 and below, the NodeJS version of HAXcms uses an insecure default configuration designed for local development. The default configuration does not perform authorization or authentication checks. If a user were to deploy haxcms-nodejs without modifying the default settings, ‘HAXCMS_DISABLE_JWT_CHECKS‘ would be set to ‘true‘ and their deployment would lack session authentication. This is fixed in version 11.0.7. | ||||
| CVE-2020-13927 | 1 Apache | 1 Airflow | 2025-07-30 | 9.8 Critical |
| The previous default setting for Airflow's Experimental API was to allow all API requests without authentication, but this poses security risks to users who miss this fact. From Airflow 1.10.11 the default has been changed to deny all requests by default and is documented at https://airflow.apache.org/docs/1.10.11/security.html#api-authentication. Note this change fixes it for new installs but existing users need to change their config to default `[api]auth_backend = airflow.api.auth.backend.deny_all` as mentioned in the Updating Guide: https://github.com/apache/airflow/blob/1.10.11/UPDATING.md#experimental-api-will-deny-all-request-by-default | ||||
| CVE-2022-24706 | 1 Apache | 1 Couchdb | 2025-07-30 | 9.8 Critical |
| In Apache CouchDB prior to 3.2.2, an attacker can access an improperly secured default installation without authenticating and gain admin privileges. The CouchDB documentation has always made recommendations for properly securing an installation, including recommending using a firewall in front of all CouchDB installations. | ||||
| CVE-2023-27524 | 1 Apache | 1 Superset | 2025-07-30 | 8.9 High |
| Session Validation attacks in Apache Superset versions up to and including 2.0.1. Installations that have not altered the default configured SECRET_KEY according to installation instructions allow for an attacker to authenticate and access unauthorized resources. This does not affect Superset administrators who have changed the default value for SECRET_KEY config. All superset installations should always set a unique secure random SECRET_KEY. Your SECRET_KEY is used to securely sign all session cookies and encrypting sensitive information on the database. Add a strong SECRET_KEY to your `superset_config.py` file like: SECRET_KEY = <YOUR_OWN_RANDOM_GENERATED_SECRET_KEY> Alternatively you can set it with `SUPERSET_SECRET_KEY` environment variable. | ||||
| CVE-2023-6448 | 1 Unitronics | 33 Samba 3.5, Samba 3.5 Firmware, Samba 4.3 and 30 more | 2025-07-30 | 9.8 Critical |
| Unitronics VisiLogic before version 9.9.00, used in Vision and Samba PLCs and HMIs, uses a default administrative password. An unauthenticated attacker with network access can take administrative control of a vulnerable system. | ||||
| CVE-2025-48927 | 1 Smarsh | 1 Telemessage | 2025-07-30 | 5.3 Medium |
| The TeleMessage service through 2025-05-05 configures Spring Boot Actuator with an exposed heap dump endpoint at a /heapdump URI, as exploited in the wild in May 2025. | ||||
| CVE-2025-25271 | 1 Phoenixcontact | 8 Charx Sec-3000, Charx Sec-3000 Firmware, Charx Sec-3050 and 5 more | 2025-07-22 | 8.8 High |
| An unauthenticated adjacent attacker is able to configure a new OCPP backend, due to insecure defaults for the configuration interface. | ||||
| CVE-2025-22248 | 1 Broadcom | 2 Bitnami, Bitnami\/pgpool | 2025-07-18 | 7.5 High |
| The bitnami/pgpool Docker image, and the bitnami/postgres-ha k8s chart, under default configurations, comes with an 'repmgr' user that allows unauthenticated access to the database inside the cluster. The PGPOOL_SR_CHECK_USER is the user that Pgpool itself uses to perform streaming replication checks against nodes, and should not be at trust level. This allows to log into a PostgreSQL database using the repgmr user without authentication. If Pgpool is exposed externally, a potential attacker could use this user to get access to the service. This is also present within the bitnami/postgres-ha Kubernetes Helm chart. | ||||
| CVE-2025-27809 | 1 Arm | 1 Mbed Tls | 2025-07-17 | 5.4 Medium |
| Mbed TLS before 2.28.10 and 3.x before 3.6.3, on the client side, accepts servers that have trusted certificates for arbitrary hostnames unless the TLS client application calls mbedtls_ssl_set_hostname. | ||||
| CVE-2025-29985 | 1 Dell | 1 Common Event Enabler | 2025-07-15 | 6.5 Medium |
| Dell Common Event Enabler, version(s) CEE 9.0.0.0, contain(s) an Initialization of a Resource with an Insecure Default vulnerability in the Common Anti-Virus Agent (CAVA). An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | ||||
| CVE-2025-41672 | 1 Wago | 1 Device Sphere | 2025-07-14 | 10 Critical |
| A remote unauthenticated attacker may use default certificates to generate JWT Tokens and gain full access to the tool and all connected devices. | ||||
| CVE-2024-9949 | 1 Forescout | 1 Secureconnector | 2025-07-12 | N/A |
| Denial of Service in Forescout SecureConnector 11.1.02.1019 on Windows allows Unprivileged user to corrupt the configuration file and cause Denial of Service in the application. | ||||
| CVE-2025-53602 | 2025-07-08 | 5.3 Medium | ||
| Zipkin through 3.5.1 has a /heapdump endpoint (associated with the use of Spring Boot Actuator), a similar issue to CVE-2025-48927. | ||||
| CVE-2024-45217 | 2 Apache, Apache Software Foundation | 2 Solr, Apache Solr | 2025-07-01 | 8.1 High |
| Insecure Default Initialization of Resource vulnerability in Apache Solr. New ConfigSets that are created via a Restore command, which copy a configSet from the backup and give it a new name, are created without setting the "trusted" metadata. ConfigSets that do not contain the flag are trusted implicitly if the metadata is missing, therefore this leads to "trusted" ConfigSets that may not have been created with an Authenticated request. "trusted" ConfigSets are able to load custom code into classloaders, therefore the flag is supposed to only be set when the request that uploads the ConfigSet is Authenticated & Authorized. This issue affects Apache Solr: from 6.6.0 before 8.11.4, from 9.0.0 before 9.7.0. This issue does not affect Solr instances that are secured via Authentication/Authorization. Users are primarily recommended to use Authentication and Authorization when running Solr. However, upgrading to version 9.7.0, or 8.11.4 will mitigate this issue otherwise. | ||||
| CVE-2025-24288 | 1 Versa | 1 Director | 2025-06-23 | 9.8 Critical |
| The Versa Director software exposes a number of services by default and allow attackers an easy foothold due to default credentials and multiple accounts (most with sudo access) that utilize the same default credentials. By default, Versa director exposes ssh and postgres to the internet, alongside a host of other services. Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers. Workarounds or Mitigation: Versa recommends the following security controls: 1) Change default passwords to complex passwords 2) Passwords must be complex with at least 8 characters that comprise of upper case, and lower case alphabets, as well as at at least one digit, and one special character 3) Passwords must be changed at least every 90 days 4) Password change history is checked to ensure that the at least the last 5 passwords must be used when changing password. 5) Review and audit logs for all authentication attempts to check for unauthorized/suspicious login attempts and enforce remediation steps. | ||||
| CVE-2024-22207 | 1 Smartbear | 1 Swagger Ui | 2025-06-17 | 5.3 Medium |
| fastify-swagger-ui is a Fastify plugin for serving Swagger UI. Prior to 2.1.0, the default configuration of `@fastify/swagger-ui` without `baseDir` set will lead to all files in the module's directory being exposed via http routes served by the module. The vulnerability is fixed in v2.1.0. Setting the `baseDir` option can also work around this vulnerability. | ||||
| CVE-2025-47945 | 1 Donetick | 1 Donetick | 2025-06-12 | 9.1 Critical |
| Donetick an open-source app for managing tasks and chores. Prior to version 0.1.44, the application uses JSON Web Tokens (JWT) for authentication, but the signing secret has a weak default value. While the responsibility is left to the system administrator to change it, this approach is inadequate. The vulnerability is proven by existence of the issue in the live version as well. This issue can result in full account takeover of any user. Version 0.1.44 contains a patch. | ||||