Total
4179 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47540 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023) | ||||
| CVE-2021-47528 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. | ||||
| CVE-2021-47526 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove(). | ||||
| CVE-2021-47523 | 2025-05-04 | 3.3 Low | ||
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddr This buffer is currently allocated in hfi1_init(): if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* allocate dummy tail memory for all receive contexts */ dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); ret = -ENOMEM; goto done; } The reinit triggered path will overwrite the old allocation and leak it. Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation to hfi1_free_devdata(). | ||||
| CVE-2021-47522 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null. | ||||
| CVE-2021-47518 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done The done() netlink callback nfc_genl_dump_ses_done() should check if received argument is non-NULL, because its allocation could fail earlier in dumpit() (nfc_genl_dump_ses()). | ||||
| CVE-2021-47503 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc() Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host() | ||||
| CVE-2021-47501 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. | ||||
| CVE-2021-47486 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix potential NULL dereference The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. | ||||
| CVE-2021-47484 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" | ||||
| CVE-2021-47476 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: ni_usb6501: fix NULL-deref in command paths The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing). Add the missing sanity checks to probe(). | ||||
| CVE-2021-47471 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. | ||||
| CVE-2021-47464 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix possible null-pointer dereference in audit_filter_rules Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null | ||||
| CVE-2021-47463 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47445 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") | ||||
| CVE-2021-47440 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: encx24j600: check error in devm_regmap_init_encx24j600 devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. | ||||
| CVE-2021-47439 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work | ||||
| CVE-2021-47418 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47415 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mvm: Fix possible NULL dereference In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL before dereferencing it. | ||||
| CVE-2021-47413 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. | ||||