Total
6203 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52509 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop(). | ||||
| CVE-2023-52503 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix use-after-free vulnerability in amdtee_close_session There is a potential race condition in amdtee_close_session that may cause use-after-free in amdtee_open_session. For instance, if a session has refcount == 1, and one thread tries to free this session via: kref_put(&sess->refcount, destroy_session); the reference count will get decremented, and the next step would be to call destroy_session(). However, if in another thread, amdtee_open_session() is called before destroy_session() has completed execution, alloc_session() may return 'sess' that will be freed up later in destroy_session() leading to use-after-free in amdtee_open_session. To fix this issue, treat decrement of sess->refcount and removal of 'sess' from session list in destroy_session() as a critical section, so that it is executed atomically. | ||||
| CVE-2023-52502 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn() Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF. Getting a reference on the socket found in a lookup while holding a lock should happen before releasing the lock. nfc_llcp_sock_get_sn() has a similar problem. Finally nfc_llcp_recv_snl() needs to make sure the socket found by nfc_llcp_sock_from_sn() does not disappear. | ||||
| CVE-2023-52491 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run. | ||||
| CVE-2023-52483 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mctp: perform route lookups under a RCU read-side lock Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <[email protected]>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion. | ||||
| CVE-2023-52479 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix uaf in smb20_oplock_break_ack drop reference after use opinfo. | ||||
| CVE-2023-52475 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e | ||||
| CVE-2023-52469 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers/amd/pm: fix a use-after-free in kv_parse_power_table When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug. | ||||
| CVE-2023-52468 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: class: fix use-after-free in class_register() The lock_class_key is still registered and can be found in lock_keys_hash hlist after subsys_private is freed in error handler path.A task who iterate over the lock_keys_hash later may cause use-after-free.So fix that up and unregister the lock_class_key before kfree(cp). On our platform, a driver fails to kset_register because of creating duplicate filename '/class/xxx'.With Kasan enabled, it prints a invalid-access bug report. KASAN bug report: BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252 Pointer tag: [15], memory tag: [fe] CPU: 7 PID: 252 Comm: modprobe Tainted: G W 6.6.0-mainline-maybe-dirty #1 Call trace: dump_backtrace+0x1b0/0x1e4 show_stack+0x2c/0x40 dump_stack_lvl+0xac/0xe0 print_report+0x18c/0x4d8 kasan_report+0xe8/0x148 __hwasan_store8_noabort+0x88/0x98 lockdep_register_key+0x19c/0x1bc class_register+0x94/0x1ec init_module+0xbc/0xf48 [rfkill] do_one_initcall+0x17c/0x72c do_init_module+0x19c/0x3f8 ... Memory state around the buggy address: ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe >ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe ^ ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access not use-after-free here.In this case, modprobe is manipulating the corrupted lock_keys_hash hlish where lock_class_key is already freed before. It's worth noting that this only can happen if lockdep is enabled, which is not true for normal system. | ||||
| CVE-2023-52447 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Defer the free of inner map when necessary When updating or deleting an inner map in map array or map htab, the map may still be accessed by non-sleepable program or sleepable program. However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map directly through bpf_map_put(), if the ref-counter is the last one (which is true for most cases), the inner map will be freed by ops->map_free() in a kworker. But for now, most .map_free() callbacks don't use synchronize_rcu() or its variants to wait for the elapse of a RCU grace period, so after the invocation of ops->map_free completes, the bpf program which is accessing the inner map may incur use-after-free problem. Fix the free of inner map by invoking bpf_map_free_deferred() after both one RCU grace period and one tasks trace RCU grace period if the inner map has been removed from the outer map before. The deferment is accomplished by using call_rcu() or call_rcu_tasks_trace() when releasing the last ref-counter of bpf map. The newly-added rcu_head field in bpf_map shares the same storage space with work field to reduce the size of bpf_map. | ||||
| CVE-2023-52446 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a race condition between btf_put() and map_free() When running `./test_progs -j` in my local vm with latest kernel, I once hit a kasan error like below: [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0 [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830 [ 1887.186498] [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G OEL 6.7.0-rc3-00699-g90679706d486-dirty #494 [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred [ 1887.190341] Call Trace: [ 1887.190666] <TASK> [ 1887.190949] dump_stack_lvl+0xac/0xe0 [ 1887.191423] ? nf_tcp_handle_invalid+0x1b0/0x1b0 [ 1887.192019] ? panic+0x3c0/0x3c0 [ 1887.192449] print_report+0x14f/0x720 [ 1887.192930] ? preempt_count_sub+0x1c/0xd0 [ 1887.193459] ? __virt_addr_valid+0xac/0x120 [ 1887.194004] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.194572] kasan_report+0xc3/0x100 [ 1887.195085] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.195668] bpf_rb_root_free+0x1f8/0x2b0 [ 1887.196183] ? __bpf_obj_drop_impl+0xb0/0xb0 [ 1887.196736] ? preempt_count_sub+0x1c/0xd0 [ 1887.197270] ? preempt_count_sub+0x1c/0xd0 [ 1887.197802] ? _raw_spin_unlock+0x1f/0x40 [ 1887.198319] bpf_obj_free_fields+0x1d4/0x260 [ 1887.198883] array_map_free+0x1a3/0x260 [ 1887.199380] bpf_map_free_deferred+0x7b/0xe0 [ 1887.199943] process_scheduled_works+0x3a2/0x6c0 [ 1887.200549] worker_thread+0x633/0x890 [ 1887.201047] ? __kthread_parkme+0xd7/0xf0 [ 1887.201574] ? kthread+0x102/0x1d0 [ 1887.202020] kthread+0x1ab/0x1d0 [ 1887.202447] ? pr_cont_work+0x270/0x270 [ 1887.202954] ? kthread_blkcg+0x50/0x50 [ 1887.203444] ret_from_fork+0x34/0x50 [ 1887.203914] ? kthread_blkcg+0x50/0x50 [ 1887.204397] ret_from_fork_asm+0x11/0x20 [ 1887.204913] </TASK> [ 1887.204913] </TASK> [ 1887.205209] [ 1887.205416] Allocated by task 2197: [ 1887.205881] kasan_set_track+0x3f/0x60 [ 1887.206366] __kasan_kmalloc+0x6e/0x80 [ 1887.206856] __kmalloc+0xac/0x1a0 [ 1887.207293] btf_parse_fields+0xa15/0x1480 [ 1887.207836] btf_parse_struct_metas+0x566/0x670 [ 1887.208387] btf_new_fd+0x294/0x4d0 [ 1887.208851] __sys_bpf+0x4ba/0x600 [ 1887.209292] __x64_sys_bpf+0x41/0x50 [ 1887.209762] do_syscall_64+0x4c/0xf0 [ 1887.210222] entry_SYSCALL_64_after_hwframe+0x63/0x6b [ 1887.210868] [ 1887.211074] Freed by task 36: [ 1887.211460] kasan_set_track+0x3f/0x60 [ 1887.211951] kasan_save_free_info+0x28/0x40 [ 1887.212485] ____kasan_slab_free+0x101/0x180 [ 1887.213027] __kmem_cache_free+0xe4/0x210 [ 1887.213514] btf_free+0x5b/0x130 [ 1887.213918] rcu_core+0x638/0xcc0 [ 1887.214347] __do_softirq+0x114/0x37e The error happens at bpf_rb_root_free+0x1f8/0x2b0: 00000000000034c0 <bpf_rb_root_free>: ; { 34c0: f3 0f 1e fa endbr64 34c4: e8 00 00 00 00 callq 0x34c9 <bpf_rb_root_free+0x9> 34c9: 55 pushq %rbp 34ca: 48 89 e5 movq %rsp, %rbp ... ; if (rec && rec->refcount_off >= 0 && 36aa: 4d 85 ed testq %r13, %r13 36ad: 74 a9 je 0x3658 <bpf_rb_root_free+0x198> 36af: 49 8d 7d 10 leaq 0x10(%r13), %rdi 36b3: e8 00 00 00 00 callq 0x36b8 <bpf_rb_root_free+0x1f8> <==== kasan function 36b8: 45 8b 7d 10 movl 0x10(%r13), %r15d <==== use-after-free load 36bc: 45 85 ff testl %r15d, %r15d 36bf: 78 8c js 0x364d <bpf_rb_root_free+0x18d> So the problem ---truncated--- | ||||
| CVE-2023-52445 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix use after free on context disconnection Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack. | ||||
| CVE-2023-52438 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in shinker's callback The mmap read lock is used during the shrinker's callback, which means that using alloc->vma pointer isn't safe as it can race with munmap(). As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker's debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway. | ||||
| CVE-2025-22004 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: fix use after free in lec_send() The ->send() operation frees skb so save the length before calling ->send() to avoid a use after free. | ||||
| CVE-2025-21979 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel wiphy_work before freeing wiphy A wiphy_work can be queued from the moment the wiphy is allocated and initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the rdev::wiphy_work is getting queued. If wiphy_free is called before the rdev::wiphy_work had a chance to run, the wiphy memory will be freed, and then when it eventally gets to run it'll use invalid memory. Fix this by canceling the work before freeing the wiphy. | ||||
| CVE-2025-21969 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837 CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci1 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline] l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline] l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline] hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5837: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726 hci_event_func net/bluetooth/hci_event.c:7473 [inline] hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 54: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated--- | ||||
| CVE-2025-21968 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix slab-use-after-free on hdcp_work [Why] A slab-use-after-free is reported when HDCP is destroyed but the property_validate_dwork queue is still running. [How] Cancel the delayed work when destroying workqueue. (cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128) | ||||
| CVE-2025-21967 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_free_work_struct ->interim_entry of ksmbd_work could be deleted after oplock is freed. We don't need to manage it with linked list. The interim request could be immediately sent whenever a oplock break wait is needed. | ||||
| CVE-2025-21945 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb2_lock If smb_lock->zero_len has value, ->llist of smb_lock is not delete and flock is old one. It will cause use-after-free on error handling routine. | ||||
| CVE-2025-21934 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: fix an API misues when rio_add_net() fails rio_add_net() calls device_register() and fails when device_register() fails. Thus, put_device() should be used rather than kfree(). Add "mport->net = NULL;" to avoid a use after free issue. | ||||