Total
6196 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49761 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always report error in run_one_delayed_ref() Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but if end users hit such problem, there will be no chance that btrfs_debug() is enabled. This can lead to very little useful info for debugging. This patch will: - Add extra info for error reporting Including: * logical bytenr * num_bytes * type * action * ref_mod - Replace the btrfs_debug() with btrfs_err() - Move the error reporting into run_one_delayed_ref() This is to avoid use-after-free, the @node can be freed in the caller. This error should only be triggered at most once. As if run_one_delayed_ref() failed, we trigger the error message, then causing the call chain to error out: btrfs_run_delayed_refs() `- btrfs_run_delayed_refs() `- btrfs_run_delayed_refs_for_head() `- run_one_delayed_ref() And we will abort the current transaction in btrfs_run_delayed_refs(). If we have to run delayed refs for the abort transaction, run_one_delayed_ref() will just cleanup the refs and do nothing, thus no new error messages would be output. | ||||
| CVE-2022-49755 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex). | ||||
| CVE-2022-49753 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix double increment of client_count in dma_chan_get() The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 129.000627] async_tx: api initialized (async) [ 130.047839] ------------[ cut here ]------------ [ 130.052472] refcount_t: underflow; use-after-free. [ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash dm_log dm_mod [last unloaded: async_tx] [ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not tainted 5.14.0-185.el9.x86_64 #1 [ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.18.0 01/17/2022 [ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d 26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff 48 c7 [ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286 [ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000 [ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0 [ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff [ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970 [ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000) knlGS:0000000000000000 [ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0 [ 130.219729] Call Trace: [ 130.222192] <TASK> [ 130.224305] dma_chan_put+0x10d/0x110 [ 130.227988] dmaengine_put+0x7a/0xa0 [ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280 [ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [ 130.242652] do_syscall_64+0x5c/0x90 [ 130.246240] ? exc_page_fault+0x62/0x150 [ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 130.255243] RIP: 0033:0x7f6463a3f5ab [ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab [ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8 [ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000 [ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8 [ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8 [ 130.320875] </TASK> [ 130.323081] ---[ end trace eff7156d56b5cf25 ]--- cat /sys/class/dma/dma0chan*/in_use would get the wrong result. 2 2 2 Test-by: Jie Hai <[email protected]> | ||||
| CVE-2022-49730 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted A use-after-free crash can occur after an ELS LOGO is aborted. Specifically, a nodelist structure is freed and then ndlp->vport->cfg_log_verbose is dereferenced in lpfc_nlp_get() when the discovery state machine is mistakenly called a second time with NLP_EVT_DEVICE_RM argument. Rework lpfc_cmpl_els_logo() to prevent the duplicate calls to release a nodelist structure. | ||||
| CVE-2022-49711 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove() In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io triggers KASAN use-after-free. To avoid the use-after-free, keep the reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to fsl_destroy_mc_io(). This patch needs rework to apply to kernels older than v5.15. | ||||
| CVE-2022-49700 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slub: add missing TID updates on slab deactivation The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab. If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains slab objects. (I haven't actually tested these cases though, this is just based on looking at the code. Writing testcases for this stuff seems like it'd be a pain...) The race leading to state inconsistency is (all operations on the same CPU and kmem_cache): - task A: begin do_slab_free(): - read TID - read pcpu freelist (==NULL) - check `slab == c->slab` (true) - [PREEMPT A->B] - task B: begin slab_alloc_node(): - fastpath fails (`c->freelist` is NULL) - enter __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - take local_lock_irqsave() - read c->freelist as NULL - get_freelist() returns NULL - write `c->slab = NULL` - drop local_unlock_irqrestore() - goto new_slab - slub_percpu_partial() is NULL - get_partial() returns NULL - slub_put_cpu_ptr() (enables preemption) - [PREEMPT B->A] - task A: finish do_slab_free(): - this_cpu_cmpxchg_double() succeeds() - [CORRUPT STATE: c->slab==NULL, c->freelist!=NULL] From there, the object on c->freelist will get lost if task B is allowed to continue from here: It will proceed to the retry_load_slab label, set c->slab, then jump to load_freelist, which clobbers c->freelist. But if we instead continue as follows, we get worse corruption: - task A: run __slab_free() on object from other struct slab: - CPU_PARTIAL_FREE case (slab was on no list, is now on pcpu partial) - task A: run slab_alloc_node() with NUMA node constraint: - fastpath fails (c->slab is NULL) - call __slab_alloc() - slub_get_cpu_ptr() (disables preemption) - enter ___slab_alloc() - c->slab is NULL: goto new_slab - slub_percpu_partial() is non-NULL - set c->slab to slub_percpu_partial(c) - [CORRUPT STATE: c->slab points to slab-1, c->freelist has objects from slab-2] - goto redo - node_match() fails - goto deactivate_slab - existing c->freelist is passed into deactivate_slab() - inuse count of slab-1 is decremented to account for object from slab-2 At this point, the inuse count of slab-1 is 1 lower than it should be. This means that if we free all allocated objects in slab-1 except for one, SLUB will think that slab-1 is completely unused, and may free its page, leading to use-after-free. | ||||
| CVE-2022-49695 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: igb: fix a use-after-free issue in igb_clean_tx_ring Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-49694 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release. | ||||
| CVE-2022-49685 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== | ||||
| CVE-2022-49669 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one. | ||||
| CVE-2022-49667 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 | ||||
| CVE-2022-49651 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Tighten cleanup_srcu_struct() GP checks Currently, cleanup_srcu_struct() checks for a grace period in progress, but it does not check for a grace period that has not yet started but which might start at any time. Such a situation could result in a use-after-free bug, so this commit adds a check for a grace period that is needed but not yet started to cleanup_srcu_struct(). | ||||
| CVE-2022-49647 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. | ||||
| CVE-2022-49626 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sfc: fix use after free when disabling sriov Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49622 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid skb access on nf_stolen When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN". | ||||
| CVE-2022-49535 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI If lpfc_issue_els_flogi() fails and returns non-zero status, the node reference count is decremented to trigger the release of the nodelist structure. However, if there is a prior registration or dev-loss-evt work pending, the node may be released prematurely. When dev-loss-evt completes, the released node is referenced causing a use-after-free null pointer dereference. Similarly, when processing non-zero ELS PLOGI completion status in lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport registration before triggering node removal. If dev-loss-evt work is pending, the node may be released prematurely and a subsequent call to lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference. Add test for pending dev-loss before decrementing the node reference count for FLOGI, PLOGI, PRLI, and ADISC handling. | ||||
| CVE-2022-49524 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: Fix the error handling in cx23885_initdev() When the driver fails to call the dma_set_mask(), the driver will get the following splat: [ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50 This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask(). | ||||
| CVE-2022-49501 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: Run unregister_netdev() before unbind() again Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop(). | ||||
| CVE-2022-49493 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix errorenous cleanup order There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync. | ||||
| CVE-2022-49489 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3 Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c Patchwork: https://patchwork.freedesktop.org/patch/483255/ [DB: fixed Fixes tag] | ||||