Total
29622 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-39369 | 2 Apereo, Fedoraproject | 2 Phpcas, Fedora | 2025-04-23 | 8 High |
| phpCAS is an authentication library that allows PHP applications to easily authenticate users via a Central Authentication Service (CAS) server. The phpCAS library uses HTTP headers to determine the service URL used to validate tickets. This allows an attacker to control the host header and use a valid ticket granted for any authorized service in the same SSO realm (CAS server) to authenticate to the service protected by phpCAS. Depending on the settings of the CAS server service registry in worst case this may be any other service URL (if the allowed URLs are configured to "^(https)://.*") or may be strictly limited to known and authorized services in the same SSO federation if proper URL service validation is applied. This vulnerability may allow an attacker to gain access to a victim's account on a vulnerable CASified service without victim's knowledge, when the victim visits attacker's website while being logged in to the same CAS server. phpCAS 1.6.0 is a major version upgrade that starts enforcing service URL discovery validation, because there is unfortunately no 100% safe default config to use in PHP. Starting this version, it is required to pass in an additional service base URL argument when constructing the client class. For more information, please refer to the upgrading doc. This vulnerability only impacts the CAS client that the phpCAS library protects against. The problematic service URL discovery behavior in phpCAS < 1.6.0 will only be disabled, and thus you are not impacted from it, if the phpCAS configuration has the following setup: 1. `phpCAS::setUrl()` is called (a reminder that you have to pass in the full URL of the current page, rather than your service base URL), and 2. `phpCAS::setCallbackURL()` is called, only when the proxy mode is enabled. 3. If your PHP's HTTP header input `X-Forwarded-Host`, `X-Forwarded-Server`, `Host`, `X-Forwarded-Proto`, `X-Forwarded-Protocol` is sanitized before reaching PHP (by a reverse proxy, for example), you will not be impacted by this vulnerability either. If your CAS server service registry is configured to only allow known and trusted service URLs the severity of the vulnerability is reduced substantially in its severity since an attacker must be in control of another authorized service. Otherwise, you should upgrade the library to get the safe service discovery behavior. | ||||
| CVE-2022-39356 | 1 Discourse | 1 Discourse | 2025-04-23 | 8.9 High |
| Discourse is a platform for community discussion. Users who receive an invitation link that is not scoped to a single email address can enter any non-admin user's email and gain access to their account when accepting the invitation. All users should upgrade to the latest version. A workaround is temporarily disabling invitations with `SiteSetting.max_invites_per_day = 0` or scope them to individual email addresses. | ||||
| CVE-2022-39370 | 1 Glpi-project | 1 Glpi | 2025-04-23 | 4.3 Medium |
| GLPI stands for Gestionnaire Libre de Parc Informatique. GLPI is a Free Asset and IT Management Software package that provides ITIL Service Desk features, licenses tracking and software auditing. Connected users may gain access to debug panel through the GLPI update script. This issue has been patched, please upgrade to 10.0.4. As a workaround, delete the `install/update.php` script. | ||||
| CVE-2022-41904 | 1 Element | 1 Element | 2025-04-23 | 6.4 Medium |
| Element iOS is an iOS Matrix client provided by Element. It is based on MatrixSDK. Prior to version 1.9.7, events encrypted using Megolm for which trust could not be established did not get decorated accordingly (with warning shields). Therefore a malicious homeserver could inject messages into the room without the user being alerted that the messages were not sent by a verified group member, even if the user has previously verified all group members. This issue has been patched in Element iOS 1.9.7. There are currently no known workarounds. | ||||
| CVE-2022-41918 | 1 Amazon | 1 Opensearch | 2025-04-23 | 6.3 Medium |
| OpenSearch is a community-driven, open source fork of Elasticsearch and Kibana. There is an issue with the implementation of fine-grained access control rules (document-level security, field-level security and field masking) where they are not correctly applied to the indices that back data streams potentially leading to incorrect access authorization. OpenSearch 1.3.7 and 2.4.0 contain a fix for this issue. Users are advised to update. There are no known workarounds for this issue. | ||||
| CVE-2022-39397 | 1 Aliyun-oss-client Project | 1 Aliyun-oss-client | 2025-04-23 | 5.6 Medium |
| aliyun-oss-client is a rust client for Alibaba Cloud OSS. Users of this library will be affected, the incoming secret will be disclosed unintentionally. This issue has been patched in version 0.8.1. | ||||
| CVE-2022-46156 | 1 Grafana | 1 Synthetic Monitoring Agent | 2025-04-23 | 7.2 High |
| The Synthetic Monitoring Agent for Grafana's Synthetic Monitoring application provides probe functionality and executes network checks for monitoring remote targets. Users running the Synthetic Monitoring agent prior to version 0.12.0 in their local network are impacted. The authentication token used to communicate with the Synthetic Monitoring API is exposed through a debugging endpoint. This token can be used to retrieve the Synthetic Monitoring checks created by the user and assigned to the agent identified with that token. The Synthetic Monitoring API will reject connections from already-connected agents, so access to the token does not guarantee access to the checks. Version 0.12.0 contains a fix. Users are advised to rotate the agent tokens. After upgrading to version v0.12.0 or later, it's recommended that users of distribution packages review the configuration stored in `/etc/synthetic-monitoring/synthetic-monitoring-agent.conf`, specifically the `API_TOKEN` variable which has been renamed to `SM_AGENT_API_TOKEN`. As a workaround for previous versions, it's recommended that users review the agent settings and set the HTTP listening address in a manner that limits the exposure, for example, localhost or a non-routed network, by using the command line parameter `-listen-address`, e.g. `-listen-address localhost:4050`. | ||||
| CVE-2022-23465 | 1 Swiftterm Project | 1 Swiftterm | 2025-04-23 | 7.1 High |
| SwiftTerm is a Xterm/VT100 Terminal emulator. Prior to commit a94e6b24d24ce9680ad79884992e1dff8e150a31, an attacker could modify the window title via a certain character escape sequence and then insert it back to the command line in the user's terminal, e.g. when the user views a file containing the malicious sequence, which could allow the attacker to execute arbitrary commands. Version a94e6b24d24ce9680ad79884992e1dff8e150a31 contains a patch for this issue. There are no known workarounds available. | ||||
| CVE-2022-23505 | 1 Auth0 | 1 Passport-wsfed-saml2 | 2025-04-23 | 5.3 Medium |
| Passport-wsfed-saml2 is a ws-federation protocol and SAML2 tokens authentication provider for Passport. In versions prior to 4.6.3, a remote attacker may be able to bypass WSFed authentication on a website using passport-wsfed-saml2. A successful attack requires that the attacker is in possession of an arbitrary IDP signed assertion. Depending on the IDP used, fully unauthenticated attacks (e.g without access to a valid user) might also be feasible if generation of a signed message can be triggered. This issue is patched in version 4.6.3. Use of SAML2 authentication instead of WSFed is a workaround. | ||||
| CVE-2022-44938 | 1 Seeddms | 1 Seeddms | 2025-04-23 | 9.8 Critical |
| Weak reset token generation in SeedDMS v6.0.20 and v5.1.7 allows attackers to execute a full account takeover via a brute force attack. | ||||
| CVE-2022-44932 | 1 Tenda | 2 A18, A18 Firmware | 2025-04-23 | 7.5 High |
| An access control issue in Tenda A18 v15.13.07.09 allows unauthenticated attackers to access the Telnet service. | ||||
| CVE-2022-41783 | 1 Tp-link | 2 Re3000, Re3000 Firmware | 2025-04-23 | 5.5 Medium |
| tdpServer of TP-Link RE300 V1 improperly processes its input, which may allow an attacker to cause a denial-of-service (DoS) condition of the product's OneMesh function. | ||||
| CVE-2022-39044 | 1 Buffalo | 108 Bhr-4grv, Bhr-4grv Firmware, Dwr-hp-g300nh and 105 more | 2025-04-23 | 6.8 Medium |
| Hidden functionality vulnerability in multiple Buffalo network devices allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command. The affected products/versions are as follows: WCR-300 firmware Ver. 1.87 and earlier, WHR-HP-G300N firmware Ver. 2.00 and earlier, WHR-HP-GN firmware Ver. 1.87 and earlier, WPL-05G300 firmware Ver. 1.88 and earlier, WZR-300HP firmware Ver. 2.00 and earlier, WZR-450HP firmware Ver. 2.00 and earlier, WZR-600DHP firmware Ver. 2.00 and earlier, WZR-900DHP firmware Ver. 1.15 and earlier, WZR-HP-AG300H firmware Ver. 1.76 and earlier, WZR-HP-G302H firmware Ver. 1.86 and earlier, WLAE-AG300N firmware Ver. 1.86 and earlier, FS-600DHP firmware Ver. 3.40 and earlier, FS-G300N firmware Ver. 3.14 and earlier, FS-HP-G300N firmware Ver. 3.33 and earlier, FS-R600DHP firmware Ver. 3.40 and earlier, BHR-4GRV firmware Ver. 2.00 and earlier, DWR-HP-G300NH firmware Ver. 1.84 and earlier, DWR-PG firmware Ver. 1.83 and earlier, HW-450HP-ZWE firmware Ver. 2.00 and earlier, WER-A54G54 firmware Ver. 1.43 and earlier, WER-AG54 firmware Ver. 1.43 and earlier, WER-AM54G54 firmware Ver. 1.43 and earlier, WER-AMG54 firmware Ver. 1.43 and earlier, WHR-300 firmware Ver. 2.00 and earlier, WHR-300HP firmware Ver. 2.00 and earlier, WHR-AM54G54 firmware Ver. 1.43 and earlier, WHR-AMG54 firmware Ver. 1.43 and earlier, WHR-AMPG firmware Ver. 1.52 and earlier, WHR-G firmware Ver. 1.49 and earlier, WHR-G300N firmware Ver. 1.65 and earlier, WHR-G301N firmware Ver. 1.87 and earlier, WHR-G54S firmware Ver. 1.43 and earlier, WHR-G54S-NI firmware Ver. 1.24 and earlier, WHR-HP-AMPG firmware Ver. 1.43 and earlier, WHR-HP-G firmware Ver. 1.49 and earlier, WHR-HP-G54 firmware Ver. 1.43 and earlier, WLI-H4-D600 firmware Ver. 1.88 and earlier, WLI-TX4-AG300N firmware Ver. 1.53 and earlier, WS024BF firmware Ver. 1.60 and earlier, WS024BF-NW firmware Ver. 1.60 and earlier, WZR2-G108 firmware Ver. 1.33 and earlier, WZR2-G300N firmware Ver. 1.55 and earlier, WZR-450HP-CWT firmware Ver. 2.00 and earlier, WZR-450HP-UB firmware Ver. 2.00 and earlier, WZR-600DHP2 firmware Ver. 1.15 and earlier, WZR-AGL300NH firmware Ver. 1.55 and earlier, WZR-AMPG144NH firmware Ver. 1.49 and earlier, WZR-AMPG300NH firmware Ver. 1.51 and earlier, WZR-D1100H firmware Ver. 2.00 and earlier, WZR-G144N firmware Ver. 1.48 and earlier, WZR-G144NH firmware Ver. 1.48 and earlier, WZR-HP-G300NH firmware Ver. 1.84 and earlier, WZR-HP-G301NH firmware Ver. 1.84 and earlier, and WZR-HP-G450H firmware Ver. 1.90 and earlier. | ||||
| CVE-2022-37918 | 1 Arubanetworks | 1 Airwave | 2025-04-23 | 8.1 High |
| Vulnerabilities in the AirWave Management Platform web-based management interface exist which expose some URLs to a lack of proper access controls. These vulnerabilities could allow a remote attacker with limited privileges to gain access to sensitive information and/or change network configurations with privileges at a higher effective level in Aruba AirWave Management Platform version(s): 8.2.15.0 and below. | ||||
| CVE-2022-37917 | 1 Arubanetworks | 1 Airwave | 2025-04-23 | 8.1 High |
| Vulnerabilities in the AirWave Management Platform web-based management interface exist which expose some URLs to a lack of proper access controls. These vulnerabilities could allow a remote attacker with limited privileges to gain access to sensitive information and/or change network configurations with privileges at a higher effective level in Aruba AirWave Management Platform version(s): 8.2.15.0 and below. | ||||
| CVE-2022-37916 | 1 Arubanetworks | 1 Airwave | 2025-04-23 | 8.1 High |
| Vulnerabilities in the AirWave Management Platform web-based management interface exist which expose some URLs to a lack of proper access controls. These vulnerabilities could allow a remote attacker with limited privileges to gain access to sensitive information and/or change network configurations with privileges at a higher effective level in Aruba AirWave Management Platform version(s): 8.2.15.0 and below. | ||||
| CVE-2001-0827 | 1 Grant Averett | 1 Ceberus Ftp Server | 2025-04-23 | 7.5 High |
| Cerberus FTP server 1.0 - 1.5 allows remote attackers to cause a denial of service (crash) via a large number of "PASV" requests. | ||||
| CVE-2022-39894 | 1 Google | 1 Android | 2025-04-23 | 4 Medium |
| Improper access control vulnerability in ContactListStartActivityHelper in Phone prior to SMR Dec-2022 Release 1 allows to access sensitive information via implicit intent. | ||||
| CVE-2022-39895 | 1 Google | 1 Android | 2025-04-23 | 4 Medium |
| Improper access control vulnerability in ContactListUtils in Phone prior to SMR Dec-2022 Release 1 allows to access contact group information via implicit intent. | ||||
| CVE-2022-39896 | 1 Google | 1 Android | 2025-04-23 | 4 Medium |
| Improper access control vulnerabilities in Contacts prior to SMR Dec-2022 Release 1 allows to access sensitive information via implicit intent. | ||||