Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16449 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68368 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: init bioset in mddev_init IO operations may be needed before md_run(), such as updating metadata after writing sysfs. Without bioset, this triggers a NULL pointer dereference as below: BUG: kernel NULL pointer dereference, address: 0000000000000020 Call Trace: md_update_sb+0x658/0xe00 new_level_store+0xc5/0x120 md_attr_store+0xc9/0x1e0 sysfs_kf_write+0x6f/0xa0 kernfs_fop_write_iter+0x141/0x2a0 vfs_write+0x1fc/0x5a0 ksys_write+0x79/0x180 __x64_sys_write+0x1d/0x30 x64_sys_call+0x2818/0x2880 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Reproducer ``` mdadm -CR /dev/md0 -l1 -n2 /dev/sd[cd] echo inactive > /sys/block/md0/md/array_state echo 10 > /sys/block/md0/md/new_level ``` mddev_init() can only be called once per mddev, no need to test if bioset has been initialized anymore. | ||||
| CVE-2023-54104 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op() 'op-cs' is copied in 'fun->mchip_number' which is used to access the 'mchip_offsets' and the 'rnb_gpio' arrays. These arrays have NAND_MAX_CHIPS elements, so the index must be below this limit. Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This would lead to out-of-bound accesses. | ||||
| CVE-2023-54075 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: common: Fix refcount leak in parse_dai_link_info Add missing of_node_put()s before the returns to balance of_node_get()s and of_node_put()s, which may get unbalanced in case the for loop 'for_each_available_child_of_node' returns early. | ||||
| CVE-2023-54095 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix notifiers being shared by PCI and VIO buses fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both PCI and VIO buses. struct notifier_block is a linked list node, so this causes any notifiers later registered to either bus type to also be registered to the other since they share the same node. This causes issues in (at least) the vgaarb code, which registers a notifier for PCI buses. pci_notify() ends up being called on a vio device, converted with to_pci_dev() even though it's not a PCI device, and finally makes a bad access in vga_arbiter_add_pci_device() as discovered with KASAN: BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00 Read of size 4 at addr c000000264c26fdc by task swapper/0/1 Call Trace: dump_stack_lvl+0x1bc/0x2b8 (unreliable) print_report+0x3f4/0xc60 kasan_report+0x244/0x698 __asan_load4+0xe8/0x250 vga_arbiter_add_pci_device+0x60/0xe00 pci_notify+0x88/0x444 notifier_call_chain+0x104/0x320 blocking_notifier_call_chain+0xa0/0x140 device_add+0xac8/0x1d30 device_register+0x58/0x80 vio_register_device_node+0x9ac/0xce0 vio_bus_scan_register_devices+0xc4/0x13c __machine_initcall_pseries_vio_device_init+0x94/0xf0 do_one_initcall+0x12c/0xaa8 kernel_init_freeable+0xa48/0xba8 kernel_init+0x64/0x400 ret_from_kernel_thread+0x5c/0x64 Fix this by creating separate notifier_block structs for each bus type. [mpe: Add #ifdef to fix CONFIG_IBMVIO=n build] | ||||
| CVE-2023-54129 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Add validation for lmac type Upon physical link change, firmware reports to the kernel about the change along with the details like speed, lmac_type_id, etc. Kernel derives lmac_type based on lmac_type_id received from firmware. In a few scenarios, firmware returns an invalid lmac_type_id, which is resulting in below kernel panic. This patch adds the missing validation of the lmac_type_id field. Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 35.321595] Modules linked in: [ 35.328982] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.4.210-g2e3169d8e1bc-dirty #17 [ 35.337014] Hardware name: Marvell CN103XX board (DT) [ 35.344297] Workqueue: events work_for_cpu_fn [ 35.352730] pstate: 40400089 (nZcv daIf +PAN -UAO) [ 35.360267] pc : strncpy+0x10/0x30 [ 35.366595] lr : cgx_link_change_handler+0x90/0x180 | ||||
| CVE-2023-54088 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: hold queue_lock when removing blkg->q_node When blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lock has to be held, otherwise, all kinds of bugs(list corruption, hard lockup, ..) can be triggered from blkg_destroy_all(). | ||||
| CVE-2023-54117 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dcssblk: fix kernel crash with list_add corruption Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. | ||||
| CVE-2023-54094 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: prevent skb corruption on frag list segmentation Ian reported several skb corruptions triggered by rx-gro-list, collecting different oops alike: [ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 62.631083] #PF: supervisor read access in kernel mode [ 62.636312] #PF: error_code(0x0000) - not-present page [ 62.641541] PGD 0 P4D 0 [ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364 [ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022 [ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858 ./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261 net/ipv4/udp_offload.c:277) [ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246 [ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000 [ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4 [ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9 [ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2 [ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9 [ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000) knlGS:0000000000000000 [ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0 [ 62.749948] Call Trace: [ 62.752498] <TASK> [ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398) [ 62.787605] skb_mac_gso_segment (net/core/gro.c:141) [ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2)) [ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862 net/core/dev.c:3659) [ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710) [ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330) [ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210) net/netfilter/core.c:626) [ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55) [ 62.825652] maybe_deliver (net/bridge/br_forward.c:193) [ 62.829420] br_flood (net/bridge/br_forward.c:233) [ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215) [ 62.837403] br_handle_frame (net/bridge/br_input.c:298 net/bridge/br_input.c:416) [ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387) [ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570) [ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638 net/core/dev.c:5727) [ 62.876795] napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067) [ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191) [ 62.893534] __napi_poll (net/core/dev.c:6498) [ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89 net/core/dev.c:6640) [ 62.905276] kthread (kernel/kthread.c:379) [ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314) [ 62.917119] </TASK> In the critical scenario, rx-gro-list GRO-ed packets are fed, via a bridge, both to the local input path and to an egress device (tun). The segmentation of such packets unsafely writes to the cloned skbs with shared heads. This change addresses the issue by uncloning as needed the to-be-segmented skbs. | ||||
| CVE-2022-50766 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for commit bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code") missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must not be moved to after clean_tree_block() because clean_tree_block() is calling btrfs_header_generation() since commit 55c69072d6bd5be1 ("Btrfs: Fix extent_buffer usage when nodesize != leafsize"). Since memzero_extent_buffer() will reset "struct btrfs_header" part, we can't move btrfs_set_header_generation() to before memzero_extent_buffer(). Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block(). | ||||
| CVE-2023-54063 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix OOB read in indx_insert_into_buffer Syzbot reported a OOB read bug: BUG: KASAN: slab-out-of-bounds in indx_insert_into_buffer+0xaa3/0x13b0 fs/ntfs3/index.c:1755 Read of size 17168 at addr ffff8880255e06c0 by task syz-executor308/3630 Call Trace: <TASK> memmove+0x25/0x60 mm/kasan/shadow.c:54 indx_insert_into_buffer+0xaa3/0x13b0 fs/ntfs3/index.c:1755 indx_insert_entry+0x446/0x6b0 fs/ntfs3/index.c:1863 ntfs_create_inode+0x1d3f/0x35c0 fs/ntfs3/inode.c:1548 ntfs_create+0x3e/0x60 fs/ntfs3/namei.c:100 lookup_open fs/namei.c:3413 [inline] If the member struct INDEX_BUFFER *index of struct indx_node is incorrect, that is, the value of __le32 used is greater than the value of __le32 total in struct INDEX_HDR. Therefore, OOB read occurs when memmove is called in indx_insert_into_buffer(). Fix this by adding a check in hdr_find_e(). | ||||
| CVE-2022-50759 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5648: Free V4L2 fwnode data on unbind The V4L2 fwnode data structure doesn't get freed on unbind, which leads to a memleak. | ||||
| CVE-2023-54105 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: check CAN address family in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field: bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. | ||||
| CVE-2023-54044 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spmi: Add a check for remove callback when removing a SPMI driver When removing a SPMI driver, there can be a crash due to NULL pointer dereference if it does not have a remove callback defined. This is one such call trace observed when removing the QCOM SPMI PMIC driver: dump_backtrace.cfi_jt+0x0/0x8 dump_stack_lvl+0xd8/0x16c panic+0x188/0x498 __cfi_slowpath+0x0/0x214 __cfi_slowpath+0x1dc/0x214 spmi_drv_remove+0x16c/0x1e0 device_release_driver_internal+0x468/0x79c driver_detach+0x11c/0x1a0 bus_remove_driver+0xc4/0x124 driver_unregister+0x58/0x84 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic] __do_sys_delete_module+0x3ec/0x53c __arm64_sys_delete_module+0x18/0x28 el0_svc_common+0xdc/0x294 el0_svc+0x38/0x9c el0_sync_handler+0x8c/0xf0 el0_sync+0x1b4/0x1c0 If a driver has all its resources allocated through devm_() APIs and does not need any other explicit cleanup, it would not require a remove callback to be defined. Hence, add a check for remove callback presence before calling it when removing a SPMI driver. | ||||
| CVE-2023-54052 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU txs may be dropped if the frame is aggregated in AMSDU. When the problem shows up, some SKBs would be hold in driver to cause network stopped temporarily. Even if the problem can be recovered by txs timeout handling, mt7921 still need to disable txs in AMSDU to avoid this issue. | ||||
| CVE-2025-68727 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: Fix uninit buffer allocated by __getname() Fix uninit errors caused after buffer allocation given to 'de'; by initializing the buffer with zeroes. The fix was found by using KMSAN. | ||||
| CVE-2023-54126 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Cleanup ring IRQ workqueues on load failure A failure loading the safexcel driver results in the following warning on boot, because the IRQ affinity has not been correctly cleaned up. Ensure we clean up the affinity and workqueues on a failure to load the driver. crypto-safexcel: probe of f2800000.crypto failed with error -2 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340 Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4 CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3 Hardware name: MikroTik RB5009 (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : free_irq+0x300/0x340 lr : free_irq+0x2e0/0x340 sp : ffff800008fa3890 x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000 x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50 x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80 x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040 x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370 x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18 x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188 x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0 Call trace: free_irq+0x300/0x340 devm_irq_release+0x14/0x20 devres_release_all+0xa0/0x100 device_unbind_cleanup+0x14/0x60 really_probe+0x198/0x2d4 __driver_probe_device+0x74/0xdc driver_probe_device+0x3c/0x110 __driver_attach+0x8c/0x190 bus_for_each_dev+0x6c/0xc0 driver_attach+0x20/0x30 bus_add_driver+0x148/0x1fc driver_register+0x74/0x120 __platform_driver_register+0x24/0x30 safexcel_init+0x48/0x1000 [crypto_safexcel] do_one_initcall+0x4c/0x1b0 do_init_module+0x44/0x1cc load_module+0x1724/0x1be4 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x1c/0x24 invoke_syscall+0x44/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x20/0x80 el0_svc+0x14/0x4c el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x148/0x14c ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2023-54076 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missed ses refcounting Use new cifs_smb_ses_inc_refcount() helper to get an active reference of @ses and @ses->dfs_root_ses (if set). This will prevent @ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses() and thus potentially causing an use-after-free bug. | ||||
| CVE-2022-50721 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. | ||||
| CVE-2023-54092 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pv: fix index value of replaced ASCE The index field of the struct page corresponding to a guest ASCE should be 0. When replacing the ASCE in s390_replace_asce(), the index of the new ASCE should also be set to 0. Having the wrong index might lead to the wrong addresses being passed around when notifying pte invalidations, and eventually to validity intercepts (VM crash) if the prefix gets unmapped and the notifier gets called with the wrong address. | ||||
| CVE-2022-50775 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix refcount leak in hns_roce_mmap rdma_user_mmap_entry_get_pgoff() takes the reference. Add missing rdma_user_mmap_entry_put() to release the reference. Acked-by Haoyue Xu <[email protected]> | ||||