Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16449 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50760 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios() As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL. If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak. | ||||
| CVE-2022-50772 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_bus_dev_new() If device_register() failed in nsim_bus_dev_new(), the value of reference in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be released. unreferenced object 0xffff88810352c480 (size 16): comm "echo", pid 5691, jiffies 4294945921 (age 133.270s) hex dump (first 16 bytes): 6e 65 74 64 65 76 73 69 6d 31 00 00 00 00 00 00 netdevsim1...... backtrace: [<000000005e2e5e26>] __kmalloc_node_track_caller+0x3a/0xb0 [<0000000094ca4fc8>] kvasprintf+0xc3/0x160 [<00000000aad09bcc>] kvasprintf_const+0x55/0x180 [<000000009bac868d>] kobject_set_name_vargs+0x56/0x150 [<000000007c1a5d70>] dev_set_name+0xbb/0xf0 [<00000000ad0d126b>] device_add+0x1f8/0x1cb0 [<00000000c222ae24>] new_device_store+0x3b6/0x5e0 [<0000000043593421>] bus_attr_store+0x72/0xa0 [<00000000cbb1833a>] sysfs_kf_write+0x106/0x160 [<00000000d0dedb8a>] kernfs_fop_write_iter+0x3a8/0x5a0 [<00000000770b66e2>] vfs_write+0x8f0/0xc80 [<0000000078bb39be>] ksys_write+0x106/0x210 [<00000000005e55a4>] do_syscall_64+0x35/0x80 [<00000000eaa40bbc>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2023-54059 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: mediatek: mtk-svs: Enable the IRQ later If the system does not come from reset (like when is booted via kexec()), the peripheral might triger an IRQ before the data structures are initialised. [ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08 [ 0.227913] Call trace: [ 0.227918] svs_isr+0x8c/0x538 | ||||
| CVE-2023-54113 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu: dump vmalloc memory info safely Currently, for double invoke call_rcu(), will dump rcu_head objects memory info, if the objects is not allocated from the slab allocator, the vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to be held, since the call_rcu() can be invoked in interrupt context, therefore, there is a possibility of spinlock deadlock scenarios. And in Preempt-RT kernel, the rcutorture test also trigger the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 3 locks held by swapper/0/1: #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70 irq event stamp: 565512 hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940 hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370 softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170 softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0 Preemption disabled at: [<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xb0 dump_stack+0x14/0x20 __might_resched+0x1aa/0x280 ? __pfx_rcu_torture_err_cb+0x10/0x10 rt_spin_lock+0x53/0x130 ? find_vmap_area+0x1f/0x70 find_vmap_area+0x1f/0x70 vmalloc_dump_obj+0x20/0x60 mem_dump_obj+0x22/0x90 __call_rcu_common+0x5bf/0x940 ? debug_smp_processor_id+0x1b/0x30 call_rcu_hurry+0x14/0x20 rcu_torture_init+0x1f82/0x2370 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_init+0x10/0x10 do_one_initcall+0x6c/0x300 ? debug_smp_processor_id+0x1b/0x30 kernel_init_freeable+0x2b9/0x540 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x150 ret_from_fork+0x40/0x50 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The previous patch fixes this by using the deadlock-safe best-effort version of find_vm_area. However, in case of failure print the fact that the pointer was a vmalloc pointer so that we print at least something. | ||||
| CVE-2022-50773 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt I got a null-ptr-defer error report when I do the following tests on the qemu platform: make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m, CONFIG_SND_MTS64=m Then making test scripts: cat>test_mod1.sh<<EOF modprobe snd-mts64 modprobe snd-mts64 EOF Executing the script, perhaps several times, we will get a null-ptr-defer report, as follow: syzkaller:~# ./test_mod.sh snd_mts64: probe of snd_mts64.0 failed with error -5 modprobe: ERROR: could not insert 'snd_mts64': No such device BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6 Call Trace: <IRQ> snd_mts64_interrupt+0x24/0xa0 [snd_mts64] parport_irq_handler+0x37/0x50 [parport] __handle_irq_event_percpu+0x39/0x190 handle_irq_event_percpu+0xa/0x30 handle_irq_event+0x2f/0x50 handle_edge_irq+0x99/0x1b0 __common_interrupt+0x5d/0x100 common_interrupt+0xa0/0xc0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30 parport_claim+0xbd/0x230 [parport] snd_mts64_probe+0x14a/0x465 [snd_mts64] platform_probe+0x3f/0xa0 really_probe+0x129/0x2c0 __driver_probe_device+0x6d/0xc0 driver_probe_device+0x1a/0xa0 __device_attach_driver+0x7a/0xb0 bus_for_each_drv+0x62/0xb0 __device_attach+0xe4/0x180 bus_probe_device+0x82/0xa0 device_add+0x550/0x920 platform_device_add+0x106/0x220 snd_mts64_attach+0x2e/0x80 [snd_mts64] port_check+0x14/0x20 [parport] bus_for_each_dev+0x6e/0xc0 __parport_register_driver+0x7c/0xb0 [parport] snd_mts64_module_init+0x31/0x1000 [snd_mts64] do_one_initcall+0x3c/0x1f0 do_init_module+0x46/0x1c6 load_module+0x1d8d/0x1e10 __do_sys_finit_module+0xa2/0xf0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Kernel panic - not syncing: Fatal exception in interrupt Rebooting in 1 seconds.. The mts wa not initialized during interrupt, we add check for mts to fix this bug. | ||||
| CVE-2023-54047 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_hdmi: cleanup drm encoder during unbind This fixes a use-after-free crash during rmmod. The DRM encoder is embedded inside the larger rockchip_hdmi, which is allocated with the component. The component memory gets freed before the main drm device is destroyed. Fix it by running encoder cleanup before tearing down its container. [moved encoder cleanup above clk_disable, similar to bind-error-path] | ||||
| CVE-2023-54105 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: check CAN address family in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field: bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. | ||||
| CVE-2023-54102 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow A static code analysis tool flagged the possibility of buffer overflow when using copy_from_user() for a debugfs entry. Currently, it is possible that copy_from_user() copies more bytes than what would fit in the mybuf char array. Add a min() restriction check between sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect against buffer overflow. | ||||
| CVE-2022-50751 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: configfs: fix possible memory leak in configfs_create_dir() kmemleak reported memory leaks in configfs_create_dir(): unreferenced object 0xffff888009f6af00 (size 192): comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s) backtrace: kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273) new_fragment (./include/linux/slab.h:600 fs/configfs/dir.c:163) configfs_register_subsystem (fs/configfs/dir.c:1857) basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... unreferenced object 0xffff888003ba7180 (size 96): comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s) backtrace: kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273) configfs_new_dirent (./include/linux/slab.h:723 fs/configfs/dir.c:194) configfs_make_dirent (fs/configfs/dir.c:248) configfs_create_dir (fs/configfs/dir.c:296) configfs_attach_group.isra.28 (fs/configfs/dir.c:816 fs/configfs/dir.c:852) configfs_register_subsystem (fs/configfs/dir.c:1881) basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... This is because the refcount is not correct in configfs_make_dirent(). For normal stage, the refcount is changing as: configfs_register_subsystem() configfs_create_dir() configfs_make_dirent() configfs_new_dirent() # set s_count = 1 dentry->d_fsdata = configfs_get(sd); # s_count = 2 ... configfs_unregister_subsystem() configfs_remove_dir() remove_dir() configfs_remove_dirent() # s_count = 1 dput() ... *dentry_unlink_inode()* configfs_d_iput() # s_count = 0, release However, if we failed in configfs_create(): configfs_register_subsystem() configfs_create_dir() configfs_make_dirent() # s_count = 2 ... configfs_create() # fail ->out_remove: configfs_remove_dirent(dentry) configfs_put(sd) # s_count = 1 return PTR_ERR(inode); There is no inode in the error path, so the configfs_d_iput() is lost and makes sd and fragment memory leaked. To fix this, when we failed in configfs_create(), manually call configfs_put(sd) to keep the refcount correct. | ||||
| CVE-2023-54044 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spmi: Add a check for remove callback when removing a SPMI driver When removing a SPMI driver, there can be a crash due to NULL pointer dereference if it does not have a remove callback defined. This is one such call trace observed when removing the QCOM SPMI PMIC driver: dump_backtrace.cfi_jt+0x0/0x8 dump_stack_lvl+0xd8/0x16c panic+0x188/0x498 __cfi_slowpath+0x0/0x214 __cfi_slowpath+0x1dc/0x214 spmi_drv_remove+0x16c/0x1e0 device_release_driver_internal+0x468/0x79c driver_detach+0x11c/0x1a0 bus_remove_driver+0xc4/0x124 driver_unregister+0x58/0x84 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic] __do_sys_delete_module+0x3ec/0x53c __arm64_sys_delete_module+0x18/0x28 el0_svc_common+0xdc/0x294 el0_svc+0x38/0x9c el0_sync_handler+0x8c/0xf0 el0_sync+0x1b4/0x1c0 If a driver has all its resources allocated through devm_() APIs and does not need any other explicit cleanup, it would not require a remove callback to be defined. Hence, add a check for remove callback presence before calling it when removing a SPMI driver. | ||||
| CVE-2023-54074 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use correct encap attribute during invalidation With introduction of post action infrastructure most of the users of encap attribute had been modified in order to obtain the correct attribute by calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action is always on default attribute. However, the cited commit didn't modify mlx5e_invalidate_encap() which prevents it from destroying correct modify header action which leads to a warning [0]. Fix the issue by using correct attribute. [0]: Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace: Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK> Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230 Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90 Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0 | ||||
| CVE-2023-54118 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: setup GPIO controller later in probe The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. | ||||
| CVE-2023-54120 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix race condition in hidp_session_thread There is a potential race condition in hidp_session_thread that may lead to use-after-free. For instance, the timer is active while hidp_del_timer is called in hidp_session_thread(). After hidp_session_put, then 'session' will be freed, causing kernel panic when hidp_idle_timeout is running. The solution is to use del_timer_sync instead of del_timer. Here is the call trace: ? hidp_session_probe+0x780/0x780 call_timer_fn+0x2d/0x1e0 __run_timers.part.0+0x569/0x940 hidp_session_probe+0x780/0x780 call_timer_fn+0x1e0/0x1e0 ktime_get+0x5c/0xf0 lapic_next_deadline+0x2c/0x40 clockevents_program_event+0x205/0x320 run_timer_softirq+0xa9/0x1b0 __do_softirq+0x1b9/0x641 __irq_exit_rcu+0xdc/0x190 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0xa1/0xc0 | ||||
| CVE-2022-50726 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix possible use-after-free in async command interface mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1c ---truncated--- | ||||
| CVE-2023-54119 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: inotify: Avoid reporting event with invalid wd When inotify_freeing_mark() races with inotify_handle_inode_event() it can happen that inotify_handle_inode_event() sees that i_mark->wd got already reset to -1 and reports this value to userspace which can confuse the inotify listener. Avoid the problem by validating that wd is sensible (and pretend the mark got removed before the event got generated otherwise). | ||||
| CVE-2023-54090 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix panic during XDP_TX with > 64 CPUs Commit 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. | ||||
| CVE-2022-50745 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: tegra-video: fix device_node use after free At probe time this code path is followed: * tegra_csi_init * tegra_csi_channels_alloc * for_each_child_of_node(node, channel) -- iterates over channels * automatically gets 'channel' * tegra_csi_channel_alloc() * saves into chan->of_node a pointer to the channel OF node * automatically gets and puts 'channel' * now the node saved in chan->of_node has refcount 0, can disappear * tegra_csi_channels_init * iterates over channels * tegra_csi_channel_init -- uses chan->of_node After that, chan->of_node keeps storing the node until the device is removed. of_node_get() the node and of_node_put() it during teardown to avoid any risk. | ||||
| CVE-2025-68364 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: relax BUG() to ocfs2_error() in __ocfs2_move_extent() In '__ocfs2_move_extent()', relax 'BUG()' to 'ocfs2_error()' just to avoid crashing the whole kernel due to a filesystem corruption. | ||||
| CVE-2022-50742 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible refcount leak in afu_ioctl() eventfd_ctx_put need to be called to put the refcount that gotten by eventfd_ctx_fdget when ocxl_irq_set_handler fails. | ||||
| CVE-2023-54070 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: igb: clean up in all error paths when enabling SR-IOV After commit 50f303496d92 ("igb: Enable SR-IOV after reinit"), removing the igb module could hang or crash (depending on the machine) when the module has been loaded with the max_vfs parameter set to some value != 0. In case of one test machine with a dual port 82580, this hang occurred: [ 232.480687] igb 0000:41:00.1: removed PHC on enp65s0f1 [ 233.093257] igb 0000:41:00.1: IOV Disabled [ 233.329969] pcieport 0000:40:01.0: AER: Multiple Uncorrected (Non-Fatal) err0 [ 233.340302] igb 0000:41:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fata) [ 233.352248] igb 0000:41:00.0: device [8086:1516] error status/mask=00100000 [ 233.361088] igb 0000:41:00.0: [20] UnsupReq (First) [ 233.368183] igb 0000:41:00.0: AER: TLP Header: 40000001 0000040f cdbfc00c c [ 233.376846] igb 0000:41:00.1: PCIe Bus Error: severity=Uncorrected (Non-Fata) [ 233.388779] igb 0000:41:00.1: device [8086:1516] error status/mask=00100000 [ 233.397629] igb 0000:41:00.1: [20] UnsupReq (First) [ 233.404736] igb 0000:41:00.1: AER: TLP Header: 40000001 0000040f cdbfc00c c [ 233.538214] pci 0000:41:00.1: AER: can't recover (no error_detected callback) [ 233.538401] igb 0000:41:00.0: removed PHC on enp65s0f0 [ 233.546197] pcieport 0000:40:01.0: AER: device recovery failed [ 234.157244] igb 0000:41:00.0: IOV Disabled [ 371.619705] INFO: task irq/35-aerdrv:257 blocked for more than 122 seconds. [ 371.627489] Not tainted 6.4.0-dirty #2 [ 371.632257] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this. [ 371.641000] task:irq/35-aerdrv state:D stack:0 pid:257 ppid:2 f0 [ 371.650330] Call Trace: [ 371.653061] <TASK> [ 371.655407] __schedule+0x20e/0x660 [ 371.659313] schedule+0x5a/0xd0 [ 371.662824] schedule_preempt_disabled+0x11/0x20 [ 371.667983] __mutex_lock.constprop.0+0x372/0x6c0 [ 371.673237] ? __pfx_aer_root_reset+0x10/0x10 [ 371.678105] report_error_detected+0x25/0x1c0 [ 371.682974] ? __pfx_report_normal_detected+0x10/0x10 [ 371.688618] pci_walk_bus+0x72/0x90 [ 371.692519] pcie_do_recovery+0xb2/0x330 [ 371.696899] aer_process_err_devices+0x117/0x170 [ 371.702055] aer_isr+0x1c0/0x1e0 [ 371.705661] ? __set_cpus_allowed_ptr+0x54/0xa0 [ 371.710723] ? __pfx_irq_thread_fn+0x10/0x10 [ 371.715496] irq_thread_fn+0x20/0x60 [ 371.719491] irq_thread+0xe6/0x1b0 [ 371.723291] ? __pfx_irq_thread_dtor+0x10/0x10 [ 371.728255] ? __pfx_irq_thread+0x10/0x10 [ 371.732731] kthread+0xe2/0x110 [ 371.736243] ? __pfx_kthread+0x10/0x10 [ 371.740430] ret_from_fork+0x2c/0x50 [ 371.744428] </TASK> The reproducer was a simple script: #!/bin/sh for i in `seq 1 5`; do modprobe -rv igb modprobe -v igb max_vfs=1 sleep 1 modprobe -rv igb done It turned out that this could only be reproduce on 82580 (quad and dual-port), but not on 82576, i350 and i210. Further debugging showed that igb_enable_sriov()'s call to pci_enable_sriov() is failing, because dev->is_physfn is 0 on 82580. Prior to commit 50f303496d92 ("igb: Enable SR-IOV after reinit"), igb_enable_sriov() jumped into the "err_out" cleanup branch. After this commit it only returned the error code. So the cleanup didn't take place, and the incorrect VF setup in the igb_adapter structure fooled the igb driver into assuming that VFs have been set up where no VF actually existed. Fix this problem by cleaning up again if pci_enable_sriov() fails. | ||||