Total
4151 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-45028 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_test: Fix NULL dereference on allocation failure If the "test->highmem = alloc_pages()" allocation fails then calling __free_pages(test->highmem) will result in a NULL dereference. Also change the error code to -ENOMEM instead of returning success. | ||||
| CVE-2024-45021 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: memcg_write_event_control(): fix a user-triggerable oops we are *not* guaranteed that anything past the terminating NUL is mapped (let alone initialized with anything sane). | ||||
| CVE-2024-45015 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: move dpu_encoder's connector assignment to atomic_enable() For cases where the crtc's connectors_changed was set without enable/active getting toggled , there is an atomic_enable() call followed by an atomic_disable() but without an atomic_mode_set(). This results in a NULL ptr access for the dpu_encoder_get_drm_fmt() call in the atomic_enable() as the dpu_encoder's connector was cleared in the atomic_disable() but not re-assigned as there was no atomic_mode_set() call. Fix the NULL ptr access by moving the assignment for atomic_enable() and also use drm_atomic_get_new_connector_for_encoder() to get the connector from the atomic_state. Patchwork: https://patchwork.freedesktop.org/patch/606729/ | ||||
| CVE-2024-45006 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. | ||||
| CVE-2024-45002 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference. | ||||
| CVE-2024-45000 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD. | ||||
| CVE-2024-44992 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference. | ||||
| CVE-2024-44990 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer. | ||||
| CVE-2024-44989 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 | ||||
| CVE-2024-44955 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute [Why] When unplug one of monitors connected after mst hub, encounter null pointer dereference. It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When commit new state which directly referring to info stored in dc_sink will cause null pointer dereference. [how] Remove redundant checking condition. Relevant condition should already be covered by checking if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected. | ||||
| CVE-2024-44939 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name in UniStrncpy_to_le(), p->header.flag will be cleared. This will cause the previously true judgment "p->header.flag & BT-LEAF" to change to no after writing the name operation, this leads to entering an incorrect branch and accessing the uninitialized object ih when judging this condition for the second time. [Fix] After got the page, check freelist first, if freelist == 0 then exit dtInsert() and return -EINVAL. | ||||
| CVE-2024-44937 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel-vbtn: Protect ACPI notify handler against recursion Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may run on multiple CPU cores racing with themselves. This race gets hit on Dell Venue 7140 tablets when undocking from the keyboard, causing the handler to try and register priv->switches_dev twice, as can be seen from the dev_info() message getting logged twice: [ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event [ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17 [ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event After which things go seriously wrong: [ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17' ... [ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory. [ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018 ... Protect intel-vbtn notify_handler() from racing with itself with a mutex to fix this. | ||||
| CVE-2024-44935 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: Fix null-ptr-deref in reuseport_add_sock(). syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: ---truncated--- | ||||
| CVE-2024-43908 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer dereference to ras_manager Check ras_manager before using it | ||||
| CVE-2024-43907 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix the null pointer dereference in apply_state_adjust_rules Check the pointer value to fix potential null pointer dereference | ||||
| CVE-2024-43906 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/admgpu: fix dereferencing null pointer context When user space sets an invalid ta type, the pointer context will be empty. So it need to check the pointer context before using it | ||||
| CVE-2024-43905 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr Check return value and conduct null pointer handling to avoid null pointer dereference. | ||||
| CVE-2024-43904 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencing This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922) | ||||
| CVE-2024-43902 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null checker before passing variables Checks null pointer before passing variables to functions. This fixes 3 NULL_RETURNS issues reported by Coverity. | ||||
| CVE-2024-43901 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401 When users run the command: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log The following NULL pointer dereference happens: [ +0.000003] BUG: kernel NULL pointer dereference, address: NULL [ +0.000005] #PF: supervisor instruction fetch in kernel mode [ +0.000002] #PF: error_code(0x0010) - not-present page [ +0.000002] PGD 0 P4D 0 [ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI [ +0.000003] RIP: 0010:0x0 [ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [...] [ +0.000002] PKRU: 55555554 [ +0.000002] Call Trace: [ +0.000002] <TASK> [ +0.000003] ? show_regs+0x65/0x70 [ +0.000006] ? __die+0x24/0x70 [ +0.000004] ? page_fault_oops+0x160/0x470 [ +0.000006] ? do_user_addr_fault+0x2b5/0x690 [ +0.000003] ? prb_read_valid+0x1c/0x30 [ +0.000005] ? exc_page_fault+0x8c/0x1a0 [ +0.000005] ? asm_exc_page_fault+0x27/0x30 [ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu] [ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? vsnprintf+0x2fb/0x600 [ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu] [ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170 [ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? debug_smp_processor_id+0x17/0x20 [ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? set_ptes.isra.0+0x2b/0x90 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? _raw_spin_unlock+0x19/0x40 [ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000002] ? do_anonymous_page+0x337/0x700 [ +0.000004] dtn_log_read+0x82/0x120 [amdgpu] [ +0.000207] full_proxy_read+0x66/0x90 [ +0.000007] vfs_read+0xb0/0x340 [ +0.000005] ? __count_memcg_events+0x79/0xe0 [ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5 [ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40 [ +0.000003] ? handle_mm_fault+0xb2/0x370 [ +0.000003] ksys_read+0x6b/0xf0 [ +0.000004] __x64_sys_read+0x19/0x20 [ +0.000003] do_syscall_64+0x60/0x130 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ +0.000003] RIP: 0033:0x7fdf32f147e2 [...] This error happens when the color log tries to read the gamut remap information from DCN401 which is not initialized in the dcn401_dpp_funcs which leads to a null pointer dereference. This commit addresses this issue by adding a proper guard to access the gamut_remap callback in case the specific ASIC did not implement this function. | ||||