Total
29787 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47450 | 1 Linux | 1 Linux Kernel | 2025-09-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). | ||||
| CVE-2021-47431 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gart.bo pin_count leak gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. | ||||
| CVE-2024-36009 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ax25: Fix netdev refcount issue The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. | ||||
| CVE-2021-47635 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix to add refcount once page is set private MM defined the rule [1] very clearly that once page was set with PG_private flag, we should increment the refcount in that page, also main flows like pageout(), migrate_page() will assume there is one additional page reference count if page_has_private() returns true. Otherwise, we may get a BUG in page migration: page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8 index:0xe2 pfn:0x14c12 aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e" flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0| zone=1|lastcpupid=0x1fffff) page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0) ------------[ cut here ]------------ kernel BUG at include/linux/page_ref.h:184! invalid opcode: 0000 [#1] SMP CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5 RIP: 0010:migrate_page_move_mapping+0xac3/0xe70 Call Trace: ubifs_migrate_page+0x22/0xc0 [ubifs] move_to_new_page+0xb4/0x600 migrate_pages+0x1523/0x1cc0 compact_zone+0x8c5/0x14b0 kcompactd+0x2bc/0x560 kthread+0x18c/0x1e0 ret_from_fork+0x1f/0x30 Before the time, we should make clean a concept, what does refcount means in page gotten from grab_cache_page_write_begin(). There are 2 situations: Situation 1: refcount is 3, page is created by __page_cache_alloc. TYPE_A - the write process is using this page TYPE_B - page is assigned to one certain mapping by calling __add_to_page_cache_locked() TYPE_C - page is added into pagevec list corresponding current cpu by calling lru_cache_add() Situation 2: refcount is 2, page is gotten from the mapping's tree TYPE_B - page has been assigned to one certain mapping TYPE_A - the write process is using this page (by calling page_cache_get_speculative()) Filesystem releases one refcount by calling put_page() in xxx_write_end(), the released refcount corresponds to TYPE_A (write task is using it). If there are any processes using a page, page migration process will skip the page by judging whether expected_page_refs() equals to page refcount. The BUG is caused by following process: PA(cpu 0) kcompactd(cpu 1) compact_zone ubifs_write_begin page_a = grab_cache_page_write_begin add_to_page_cache_lru lru_cache_add pagevec_add // put page into cpu 0's pagevec (refcnf = 3, for page creation process) ubifs_write_end SetPagePrivate(page_a) // doesn't increase page count ! unlock_page(page_a) put_page(page_a) // refcnt = 2 [...] PB(cpu 0) filemap_read filemap_get_pages add_to_page_cache_lru lru_cache_add __pagevec_lru_add // traverse all pages in cpu 0's pagevec __pagevec_lru_add_fn SetPageLRU(page_a) isolate_migratepages isolate_migratepages_block get_page_unless_zero(page_a) // refcnt = 3 list_add(page_a, from_list) migrate_pages(from_list) __unmap_and_move move_to_new_page ubifs_migrate_page(page_a) migrate_page_move_mapping expected_page_refs get 3 (migration[1] + mapping[1] + private[1]) release_pages put_page_testzero(page_a) // refcnt = 3 page_ref_freeze // refcnt = 0 page_ref_dec_and_test(0 - 1 = -1) page_ref_unfreeze VM_BUG_ON_PAGE(-1 != 0, page) UBIFS doesn't increase the page refcount after setting private flag, which leads to page migration task believes the page is not used by any other processes, so the page is migrated. This causes concurrent accessing on page refcount between put_page() called by other process(eg. read process calls lru_cache_add) and page_ref_unfreeze() called by mi ---truncated--- | ||||
| CVE-2022-49109 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix inode reference leakage in ceph_get_snapdir() The ceph_get_inode() will search for or insert a new inode into the hash for the given vino, and return a reference to it. If new is non-NULL, its reference is consumed. We should release the reference when in error handing cases. | ||||
| CVE-2022-49088 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probe This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. | ||||
| CVE-2022-49161 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Fix error handling in mt8183_da7219_max98357_dev_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. Fix this by calling of_node_put() in error handling too. | ||||
| CVE-2022-49246 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: atmel: Fix error handling in snd_proto_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. Fix this by calling of_node_put() in error handling too. | ||||
| CVE-2022-49245 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. | ||||
| CVE-2022-49244 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. Fix this by calling of_node_put() in error handling too. | ||||
| CVE-2021-47447 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/a3xx: fix error handling in a3xx_gpu_init() These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. | ||||
| CVE-2022-49421 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2022-49415 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:ipmb: Fix refcount leak in ipmi_ipmb_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2014-0773 | 1 Advantech | 1 Advantech Webaccess | 2025-09-19 | N/A |
| The BWOCXRUN.BwocxrunCtrl.1 control contains a method named “CreateProcess.” This method contains validation to ensure an attacker cannot run arbitrary command lines. After validation, the values supplied in the HTML are passed to the Windows CreateProcessA API. The validation can be bypassed allowing for running arbitrary command lines. The command line can specify running remote files (example: UNC command line). A function exists at offset 100019B0 of bwocxrun.ocx. Inside this function, there are 3 calls to strstr to check the contents of the user specified command line. If “\setup.exe,” “\bwvbprt.exe,” or “\bwvbprtl.exe” are contained in the command line (strstr returns nonzero value), the command line passes validation and is then passed to CreateProcessA. | ||||
| CVE-2014-0759 | 1 Schneider-electric | 1 Floating License Manager | 2025-09-19 | N/A |
| Unquoted Windows search path vulnerability in Schneider Electric Floating License Manager 1.0.0 through 1.4.0 allows local users to gain privileges via a Trojan horse application with a name composed of an initial substring of a path that contains a space character. | ||||
| CVE-2022-30683 | 1 Adobe | 1 Experience Manager | 2025-09-19 | 5.3 Medium |
| Adobe Experience Manager versions 6.5.13.0 (and earlier) is affected by a Violation of Secure Design Principles vulnerability that could lead to bypass the security feature of the encryption mechanism in the backend . An attacker could leverage this vulnerability to decrypt secrets, however, this is a high-complexity attack as the threat actor needs to already possess those secrets. Exploitation of this issue requires low-privilege access to AEM. | ||||
| CVE-2024-27403 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel E4s and 1 more | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: reset dst in route object after setting up flow dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow. | ||||
| CVE-2024-39488 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc ---truncated--- | ||||
| CVE-2024-7129 | 2 Nsqua, Nsquared | 2 Simply Schedule Appointments, Appointment Booking Calendar | 2025-09-15 | 7.2 High |
| The Appointment Booking Calendar WordPress plugin before 1.6.7.43 does not escape template syntax provided via user input, leading to Twig Template Injection which further exploited can result to remote code Execution by high privilege such as admins | ||||
| CVE-2023-51074 | 2 Json-path, Redhat | 5 Jayway Jsonpath, Amq Streams, Apache-camel-spring-boot and 2 more | 2025-09-12 | 5.3 Medium |
| json-path v2.8.0 was discovered to contain a stack overflow via the Criteria.parse() method. | ||||