Filtered by vendor Linux
Subscriptions
Total
12740 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-41010 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time. | ||||
| CVE-2024-41009 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter. | ||||
| CVE-2024-41007 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: tcp: avoid too many retransmit packets If a TCP socket is using TCP_USER_TIMEOUT, and the other peer retracted its window to zero, tcp_retransmit_timer() can retransmit a packet every two jiffies (2 ms for HZ=1000), for about 4 minutes after TCP_USER_TIMEOUT has 'expired'. The fix is to make sure tcp_rtx_probe0_timed_out() takes icsk->icsk_user_timeout into account. Before blamed commit, the socket would not timeout after icsk->icsk_user_timeout, but would use standard exponential backoff for the retransmits. Also worth noting that before commit e89688e3e978 ("net: tcp: fix unexcepted socket die when snd_wnd is 0"), the issue would last 2 minutes instead of 4. | ||||
| CVE-2024-41002 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - Fix memory leak for sec resource release The AIV is one of the SEC resources. When releasing resources, it need to release the AIV resources at the same time. Otherwise, memory leakage occurs. The aiv resource release is added to the sec resource release function. | ||||
| CVE-2024-41001 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: work around a potential audit memory leak kmemleak complains that there's a memory leak related to connect handling: unreferenced object 0xffff0001093bdf00 (size 128): comm "iou-sqp-455", pid 457, jiffies 4294894164 hex dump (first 32 bytes): 02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 2e481b1a): [<00000000c0a26af4>] kmemleak_alloc+0x30/0x38 [<000000009c30bb45>] kmalloc_trace+0x228/0x358 [<000000009da9d39f>] __audit_sockaddr+0xd0/0x138 [<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8 [<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4 [<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48 [<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4 [<00000000d999b491>] ret_from_fork+0x10/0x20 which can can happen if: 1) The command type does something on the prep side that triggers an audit call. 2) The thread hasn't done any operations before this that triggered an audit call inside ->issue(), where we have audit_uring_entry() and audit_uring_exit(). Work around this by issuing a blanket NOP operation before the SQPOLL does anything. | ||||
| CVE-2024-41000 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block/ioctl: prefer different overflow check Running syzkaller with the newly reintroduced signed integer overflow sanitizer shows this report: [ 62.982337] ------------[ cut here ]------------ [ 62.985692] cgroup: Invalid name [ 62.986211] UBSAN: signed-integer-overflow in ../block/ioctl.c:36:46 [ 62.989370] 9pnet_fd: p9_fd_create_tcp (7343): problem connecting socket to 127.0.0.1 [ 62.992992] 9223372036854775807 + 4095 cannot be represented in type 'long long' [ 62.997827] 9pnet_fd: p9_fd_create_tcp (7345): problem connecting socket to 127.0.0.1 [ 62.999369] random: crng reseeded on system resumption [ 63.000634] GUP no longer grows the stack in syz-executor.2 (7353): 20002000-20003000 (20001000) [ 63.000668] CPU: 0 PID: 7353 Comm: syz-executor.2 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 63.000677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 63.000682] Call Trace: [ 63.000686] <TASK> [ 63.000731] dump_stack_lvl+0x93/0xd0 [ 63.000919] __get_user_pages+0x903/0xd30 [ 63.001030] __gup_longterm_locked+0x153e/0x1ba0 [ 63.001041] ? _raw_read_unlock_irqrestore+0x17/0x50 [ 63.001072] ? try_get_folio+0x29c/0x2d0 [ 63.001083] internal_get_user_pages_fast+0x1119/0x1530 [ 63.001109] iov_iter_extract_pages+0x23b/0x580 [ 63.001206] bio_iov_iter_get_pages+0x4de/0x1220 [ 63.001235] iomap_dio_bio_iter+0x9b6/0x1410 [ 63.001297] __iomap_dio_rw+0xab4/0x1810 [ 63.001316] iomap_dio_rw+0x45/0xa0 [ 63.001328] ext4_file_write_iter+0xdde/0x1390 [ 63.001372] vfs_write+0x599/0xbd0 [ 63.001394] ksys_write+0xc8/0x190 [ 63.001403] do_syscall_64+0xd4/0x1b0 [ 63.001421] ? arch_exit_to_user_mode_prepare+0x3a/0x60 [ 63.001479] entry_SYSCALL_64_after_hwframe+0x6f/0x77 [ 63.001535] RIP: 0033:0x7f7fd3ebf539 [ 63.001551] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 63.001562] RSP: 002b:00007f7fd32570c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 63.001584] RAX: ffffffffffffffda RBX: 00007f7fd3ff3f80 RCX: 00007f7fd3ebf539 [ 63.001590] RDX: 4db6d1e4f7e43360 RSI: 0000000020000000 RDI: 0000000000000004 [ 63.001595] RBP: 00007f7fd3f1e496 R08: 0000000000000000 R09: 0000000000000000 [ 63.001599] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 63.001604] R13: 0000000000000006 R14: 00007f7fd3ff3f80 R15: 00007ffd415ad2b8 ... [ 63.018142] ---[ end trace ]--- Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang; It was re-enabled in the kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow sanitizer"). Let's rework this overflow checking logic to not actually perform an overflow during the check itself, thus avoiding the UBSAN splat. [1]: https://github.com/llvm/llvm-project/pull/82432 | ||||
| CVE-2024-40997 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate: fix memory leak on CPU EPP exit The cpudata memory from kzalloc() in amd_pstate_epp_cpu_init() is not freed in the analogous exit function, so fix that. [ rjw: Subject and changelog edits ] | ||||
| CVE-2024-40995 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc() syzbot found hanging tasks waiting on rtnl_lock [1] A reproducer is available in the syzbot bug. When a request to add multiple actions with the same index is sent, the second request will block forever on the first request. This holds rtnl_lock, and causes tasks to hang. Return -EAGAIN to prevent infinite looping, while keeping documented behavior. [1] INFO: task kworker/1:0:5088 blocked for more than 143 seconds. Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000 Workqueue: events_power_efficient reg_check_chans_work Call Trace: <TASK> context_switch kernel/sched/core.c:5409 [inline] __schedule+0xf15/0x5d00 kernel/sched/core.c:6746 __schedule_loop kernel/sched/core.c:6823 [inline] schedule+0xe7/0x350 kernel/sched/core.c:6838 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895 __mutex_lock_common kernel/locking/mutex.c:684 [inline] __mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752 wiphy_lock include/net/cfg80211.h:5953 [inline] reg_leave_invalid_chans net/wireless/reg.c:2466 [inline] reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481 | ||||
| CVE-2024-40994 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ptp: fix integer overflow in max_vclocks_store On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc() to do the allocation to prevent this. | ||||
| CVE-2024-40984 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel E4s and 1 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine." Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine.""). The initial purpose of this commit was to stop memory mappings for operation regions from overlapping page boundaries, as it can trigger warnings if different page attributes are present. However, it was found that when this situation arises, mapping continues until the boundary's end, but there is still an attempt to read/write the entire length of the map, leading to a NULL pointer deference. For example, if a four-byte mapping request is made but only one byte is mapped because it hits the current page boundary's end, a four-byte read/write attempt is still made, resulting in a NULL pointer deference. Instead, map the entire length, as the ACPI specification does not mandate that it must be within the same page boundary. It is permissible for it to be mapped across different regions. | ||||
| CVE-2024-40981 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: bypass empty buckets in batadv_purge_orig_ref() Many syzbot reports are pointing to soft lockups in batadv_purge_orig_ref() [1] Root cause is unknown, but we can avoid spending too much time there and perhaps get more interesting reports. [1] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621] Modules linked in: irq event stamp: 6182794 hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline] softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline] softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271 CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_purge_orig pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline] pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388 lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 sp : ffff800099007970 x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000 x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001 x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4 x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0 x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001 x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003 x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000 Call trace: __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline] arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline] __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51 lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103 sp : ffff800093a17d30 x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4 x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002 x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000 x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396 x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001 ---truncated--- | ||||
| CVE-2024-40977 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921s: fix potential hung tasks during chip recovery During chip recovery (e.g. chip reset), there is a possible situation that kernel worker reset_work is holding the lock and waiting for kernel thread stat_worker to be parked, while stat_worker is waiting for the release of the same lock. It causes a deadlock resulting in the dumping of hung tasks messages and possible rebooting of the device. This patch prevents the execution of stat_worker during the chip recovery. | ||||
| CVE-2024-40973 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-vcodec: potential null pointer deference in SCP The return value of devm_kzalloc() needs to be checked to avoid NULL pointer deference. This is similar to CVE-2022-3113. | ||||
| CVE-2024-40972 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: do not create EA inode under buffer lock ext4_xattr_set_entry() creates new EA inodes while holding buffer lock on the external xattr block. This is problematic as it nests all the allocation locking (which acquires locks on other buffers) under the buffer lock. This can even deadlock when the filesystem is corrupted and e.g. quota file is setup to contain xattr block as data block. Move the allocation of EA inode out of ext4_xattr_set_entry() into the callers. | ||||
| CVE-2024-40970 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Avoid hw_desc array overrun in dw-axi-dmac I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3 segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put() handles the hw_desc considering the descs_allocated, this scenario would result in a kernel panic (hw_desc array will be overrun). To fix this, the proposal is to add a new member to the axi_dma_desc structure, where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in axi_desc_put() to handle the hw_desc array correctly. Additionally I propose to remove the axi_chan_start_first_queued() call after completing the transfer, since it was identified that unbalance can occur (started descriptors can be interrupted and transfer ignored due to DMA channel not being enabled). | ||||
| CVE-2024-40967 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: imx: Introduce timeout when waiting on transmitter empty By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue. | ||||
| CVE-2024-40965 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: lpi2c: Avoid calling clk_get_rate during transfer Instead of repeatedly calling clk_get_rate for each transfer, lock the clock rate and cache the value. A deadlock has been observed while adding tlv320aic32x4 audio codec to the system. When this clock provider adds its clock, the clk mutex is locked already, it needs to access i2c, which in return needs the mutex for clk_get_rate as well. | ||||
| CVE-2024-40964 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() The cs35l41_hda_unbind() function clears the hda_component entry matching it's index and then dereferences the codec pointer held in the first element of the hda_component array, this is an issue when the device index was 0. Instead use the codec pointer stashed in the cs35l41_hda structure as it will still be valid. | ||||
| CVE-2024-40962 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: allocate dummy checksums for zoned NODATASUM writes Shin'ichiro reported that when he's running fstests' test-case btrfs/167 on emulated zoned devices, he's seeing the following NULL pointer dereference in 'btrfs_zone_finish_endio()': Oops: general protection fault, probably for non-canonical address 0xdffffc0000000011: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 4 PID: 2332440 Comm: kworker/u80:15 Tainted: G W 6.10.0-rc2-kts+ #4 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] RSP: 0018:ffff88867f107a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff893e5534 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed1081696028 R10: ffff88840b4b0143 R11: ffff88834dfff600 R12: ffff88840b4b0000 R13: 0000000000020000 R14: 0000000000000000 R15: ffff888530ad5210 FS: 0000000000000000(0000) GS:ffff888e3f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f87223fff38 CR3: 00000007a7c6a002 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die_addr+0x46/0x70 ? exc_general_protection+0x14f/0x250 ? asm_exc_general_protection+0x26/0x30 ? do_raw_read_unlock+0x44/0x70 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] btrfs_finish_one_ordered+0x5d9/0x19a0 [btrfs] ? __pfx_lock_release+0x10/0x10 ? do_raw_write_lock+0x90/0x260 ? __pfx_do_raw_write_lock+0x10/0x10 ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? _raw_write_unlock+0x23/0x40 ? btrfs_finish_ordered_zoned+0x5a9/0x850 [btrfs] ? lock_acquire+0x435/0x500 btrfs_work_helper+0x1b1/0xa70 [btrfs] ? __schedule+0x10a8/0x60b0 ? __pfx___might_resched+0x10/0x10 process_one_work+0x862/0x1410 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0x1010 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? trace_irq_enable.constprop.0+0xce/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Enabling CONFIG_BTRFS_ASSERT revealed the following assertion to trigger: assertion failed: !list_empty(&ordered->list), in fs/btrfs/zoned.c:1815 This indicates, that we're missing the checksums list on the ordered_extent. As btrfs/167 is doing a NOCOW write this is to be expected. Further analysis with drgn confirmed the assumption: >>> inode = prog.crashed_thread().stack_trace()[11]['ordered'].inode >>> btrfs_inode = drgn.container_of(inode, "struct btrfs_inode", \ "vfs_inode") >>> print(btrfs_inode.flags) (u32)1 As zoned emulation mode simulates conventional zones on regular devices, we cannot use zone-append for writing. But we're only attaching dummy checksums if we're doing a zone-append write. So for NOCOW zoned data writes on conventional zones, also attach a dummy checksum. | ||||
| CVE-2024-40961 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible NULL deref in fib6_nh_init() syzbot reminds us that in6_dev_get() can return NULL. fib6_nh_init() ip6_validate_gw( &idev ) ip6_route_check_nh( idev ) *idev = in6_dev_get(dev); // can be NULL Oops: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 11237 Comm: syz-executor.3 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b8965297 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:fib6_nh_init+0x640/0x2160 net/ipv6/route.c:3606 Code: 00 00 fc ff df 4c 8b 64 24 58 48 8b 44 24 28 4c 8b 74 24 30 48 89 c1 48 89 44 24 28 48 8d 98 e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 0f 85 b3 17 00 00 8b 1b 31 ff 89 de e8 b8 8b RSP: 0018:ffffc900032775a0 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffffc90003277a54 RDI: ffff88802b3a08d8 RBP: ffffc900032778b0 R08: 00000000000002fc R09: 0000000000000000 R10: 00000000000002fc R11: 0000000000000000 R12: ffff88802b3a08b8 R13: 1ffff9200064eec8 R14: ffffc90003277a00 R15: dffffc0000000000 FS: 00007f940feb06c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000245e8000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip6_route_info_create+0x99e/0x12b0 net/ipv6/route.c:3809 ip6_route_add+0x28/0x160 net/ipv6/route.c:3853 ipv6_route_ioctl+0x588/0x870 net/ipv6/route.c:4483 inet6_ioctl+0x21a/0x280 net/ipv6/af_inet6.c:579 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f940f07cea9 | ||||