Filtered by vendor Linux
Subscriptions
Total
12596 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-47691 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread() syzbot reports a f2fs bug as below: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_report+0xe8/0x550 mm/kasan/report.c:491 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline] __refcount_add include/linux/refcount.h:184 [inline] __refcount_inc include/linux/refcount.h:241 [inline] refcount_inc include/linux/refcount.h:258 [inline] get_task_struct include/linux/sched/task.h:118 [inline] kthread_stop+0xca/0x630 kernel/kthread.c:704 f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210 f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283 f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline] __f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is below race condition, it may cause use-after-free issue in sbi->gc_th pointer. - remount - f2fs_remount - f2fs_stop_gc_thread - kfree(gc_th) - f2fs_ioc_shutdown - f2fs_do_shutdown - f2fs_stop_gc_thread - kthread_stop(gc_th->f2fs_gc_task) : sbi->gc_thread = NULL; We will call f2fs_do_shutdown() in two paths: - for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore for fixing. - for f2fs_shutdown() path, it's safe since caller has already grabbed sb->s_umount semaphore. | ||||
| CVE-2024-47690 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: get rid of online repaire on corrupted directory syzbot reports a f2fs bug as below: kernel BUG at fs/f2fs/inode.c:896! RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Call Trace: evict+0x532/0x950 fs/inode.c:704 dispose_list fs/inode.c:747 [inline] evict_inodes+0x5f9/0x690 fs/inode.c:797 generic_shutdown_super+0x9d/0x2d0 fs/super.c:627 kill_block_super+0x44/0x90 fs/super.c:1696 kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898 deactivate_locked_super+0xc4/0x130 fs/super.c:473 cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373 task_work_run+0x24f/0x310 kernel/task_work.c:228 ptrace_notify+0x2d2/0x380 kernel/signal.c:2402 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896 Online repaire on corrupted directory in f2fs_lookup() can generate dirty data/meta while racing w/ readonly remount, it may leave dirty inode after filesystem becomes readonly, however, checkpoint() will skips flushing dirty inode in a state of readonly mode, result in above panic. Let's get rid of online repaire in f2fs_lookup(), and leave the work to fsck.f2fs. | ||||
| CVE-2024-47687 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix invalid mr resource destroy Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr resources which never got initialized in the first place. This patch adds the missing check in mlx5_vdpa_destroy_mr_resources() to block releasing non-initialized mr resources. Reference trace: mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned? BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 140216067 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] Code: [...] RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246 RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000 RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670 R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000 R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea FS: 00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] ? __die_body.cold+0x8/0xd ? page_fault_oops+0x134/0x170 ? __irq_work_queue_local+0x2b/0xc0 ? irq_work_queue+0x2c/0x50 ? exc_page_fault+0x62/0x150 ? asm_exc_page_fault+0x22/0x30 ? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa] ? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb] mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa] genl_family_rcv_msg_doit+0xd9/0x130 genl_family_rcv_msg+0x14d/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] ? _copy_to_user+0x1a/0x30 ? move_addr_to_user+0x4b/0xe0 genl_rcv_msg+0x47/0xa0 ? __import_iovec+0x46/0x150 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x245/0x370 netlink_sendmsg+0x206/0x440 __sys_sendto+0x1dc/0x1f0 ? do_read_fault+0x10c/0x1d0 ? do_pte_missing+0x10d/0x190 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x5c/0xf0 ? __count_memcg_events+0x4f/0xb0 ? mm_account_fault+0x6c/0x100 ? handle_mm_fault+0x116/0x270 ? do_user_addr_fault+0x1d6/0x6a0 ? do_syscall_64+0x6b/0xf0 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 ? clear_bhb_loop+0x25/0x80 entry_SYSCALL_64_after_hwframe+0x78/0x80 | ||||
| CVE-2024-47686 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate() The psc->div[] array has psc->num_div elements. These values come from when we call clk_hw_register_div(). It's adc_divisors and ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >= instead of > to prevent an out of bounds read. | ||||
| CVE-2024-47685 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core ---truncated--- | ||||
| CVE-2024-47682 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix off-by-one error in sd_read_block_characteristics() Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for example), sd_read_block_characteristics() may attempt an out-of-bounds memory access when accessing the zoned field at offset 8. | ||||
| CVE-2024-47681 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he routine adding an sta interface to the mt7996 driver. Found by code review. | ||||
| CVE-2024-47680 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: check discard support for conventional zones As the helper function f2fs_bdev_support_discard() shows, f2fs checks if the target block devices support discard by calling bdev_max_discard_sectors() and bdev_is_zoned(). This check works well for most cases, but it does not work for conventional zones on zoned block devices. F2fs assumes that zoned block devices support discard, and calls __submit_discard_cmd(). When __submit_discard_cmd() is called for sequential write required zones, it works fine since __submit_discard_cmd() issues zone reset commands instead of discard commands. However, when __submit_discard_cmd() is called for conventional zones, __blkdev_issue_discard() is called even when the devices do not support discard. The inappropriate __blkdev_issue_discard() call was not a problem before the commit 30f1e7241422 ("block: move discard checks into the ioctl handler") because __blkdev_issue_discard() checked if the target devices support discard or not. If not, it returned EOPNOTSUPP. After the commit, __blkdev_issue_discard() no longer checks it. It always returns zero and sets NULL to the given bio pointer. This NULL pointer triggers f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the commands below at the umount step, where /dev/nullb0 is a zoned null_blk with 5GB total size, 128MB zone size and 10 conventional zones. $ mkfs.f2fs -f -m /dev/nullb0 $ mount /dev/nullb0 /mnt $ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done $ umount /mnt To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call. When discard is requested for conventional zones, check if the device supports discard or not. If not, return EOPNOTSUPP. | ||||
| CVE-2024-47679 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfs: fix race between evice_inodes() and find_inode()&iput() Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/[email protected]/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug. | ||||
| CVE-2024-47678 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: icmp: change the order of rate limits ICMP messages are ratelimited : After the blamed commits, the two rate limiters are applied in this order: 1) host wide ratelimit (icmp_global_allow()) 2) Per destination ratelimit (inetpeer based) In order to avoid side-channels attacks, we need to apply the per destination check first. This patch makes the following change : 1) icmp_global_allow() checks if the host wide limit is reached. But credits are not yet consumed. This is deferred to 3) 2) The per destination limit is checked/updated. This might add a new node in inetpeer tree. 3) icmp_global_consume() consumes tokens if prior operations succeeded. This means that host wide ratelimit is still effective in keeping inetpeer tree small even under DDOS. As a bonus, I removed icmp_global.lock as the fast path can use a lock-free operation. | ||||
| CVE-2024-47677 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: resolve memory leak from exfat_create_upcase_table() If exfat_load_upcase_table reaches end and returns -EINVAL, allocated memory doesn't get freed and while exfat_load_default_upcase_table allocates more memory, leading to a memory leak. Here's link to syzkaller crash report illustrating this issue: https://syzkaller.appspot.com/text?tag=CrashReport&x=1406c201980000 | ||||
| CVE-2024-47676 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway Syzbot reports a UAF in hugetlb_fault(). This happens because vmf_anon_prepare() could drop the per-VMA lock and allow the current VMA to be freed before hugetlb_vma_unlock_read() is called. We can fix this by using a modified version of vmf_anon_prepare() that doesn't release the VMA lock on failure, and then release it ourselves after hugetlb_vma_unlock_read(). | ||||
| CVE-2024-47675 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the error_free label and frees the array of bpf_uprobe's without calling bpf_uprobe_unregister(). This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer without removing it from the uprobe->consumers list. | ||||
| CVE-2024-47674 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: avoid leaving partial pfn mappings around in error case As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. | ||||
| CVE-2024-47673 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pause TCM when the firmware is stopped Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 | ||||
| CVE-2024-47672 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. [edit commit message] | ||||
| CVE-2024-47671 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: prevent kernel-usb-infoleak The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. | ||||
| CVE-2024-47670 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: add bounds checking to ocfs2_xattr_find_entry() Add a paranoia check to make sure it doesn't stray beyond valid memory region containing ocfs2 xattr entries when scanning for a match. It will prevent out-of-bound access in case of crafted images. | ||||
| CVE-2024-47669 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix state management in error path of log writing function After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. | ||||
| CVE-2024-47668 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc() If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. | ||||