Total
4305 CVE
CVE | Vendors | Products | Updated | CVSS v3.1 |
---|---|---|---|---|
CVE-2024-55641 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: xfs: unlock inodes when erroring out of xfs_trans_alloc_dir Debugging a filesystem patch with generic/475 caused the system to hang after observing the following sequences in dmesg: XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5 XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5 XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5 XFS (dm-0): log I/O error -5 XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311). Shutting down filesystem. XFS (dm-0): Please unmount the filesystem and rectify the problem(s) XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c. Caller xfs_trans_dqresv+0x236/0x440 [xfs] XFS (dm-0): Corruption detected. Unmount and run xfs_repair XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7 The system is stuck in unmount trying to lock a couple of inodes so that they can be purged. The dquot corruption notice above is a clue to what happened -- a link() call tried to set up a transaction to link a child into a directory. Quota reservation for the transaction failed after IO errors shut down the filesystem, but then we forgot to unlock the inodes on our way out. Fix that. | ||||
CVE-2022-49202 | 1 Linux | 1 Linux Kernel | 2025-07-13 | 6.1 Medium |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: add missing NULL check in h5_enqueue Syzbot hit general protection fault in __pm_runtime_resume(). The problem was in missing NULL check. hu->serdev can be NULL and we should not blindly pass &serdev->dev somewhere, since it will cause GPF. | ||||
CVE-2023-46427 | 1 Gpac | 1 Gpac | 2025-07-13 | 9.8 Critical |
An issue was discovered in gpac version 2.3-DEV-rev588-g7edc40fee-master, allows remote attackers to execute arbitrary code, cause a denial of service (DoS), and obtain sensitive information via null pointer deference in gf_dash_setup_period component in media_tools/dash_client.c. | ||||
CVE-2022-49055 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check for potential null return of kmalloc_array() As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion. | ||||
CVE-2024-26867 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_8255: Correct error in subdevice initialization The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework subdevice initialization functions") to the initialization of the io field of struct subdev_8255_private broke all cards using the drivers/comedi/drivers/comedi_8255.c module. Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field in the newly allocated struct subdev_8255_private to the non-NULL callback given to the function, otherwise it used a flag parameter to select between subdev_8255_mmio and subdev_8255_io. The refactoring removed that logic and the flag, as subdev_8255_mm_init() and subdev_8255_io_init() now explicitly pass subdev_8255_mmio and subdev_8255_io respectively to __subdev_8255_init(), only __subdev_8255_init() never sets spriv->io to the supplied callback. That spriv->io is NULL leads to a later BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1 Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00 RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000 R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8 FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0 Call Trace: <TASK> ? __die_body+0x15/0x57 ? page_fault_oops+0x2ef/0x33c ? insert_vmap_area.constprop.0+0xb6/0xd5 ? alloc_vmap_area+0x529/0x5ee ? exc_page_fault+0x15a/0x489 ? asm_exc_page_fault+0x22/0x30 __subdev_8255_init+0x79/0x8d [comedi_8255] pci_8255_auto_attach+0x11a/0x139 [8255_pci] comedi_auto_config+0xac/0x117 [comedi] ? __pfx___driver_attach+0x10/0x10 pci_device_probe+0x88/0xf9 really_probe+0x101/0x248 __driver_probe_device+0xbb/0xed driver_probe_device+0x1a/0x72 __driver_attach+0xd4/0xed bus_for_each_dev+0x76/0xb8 bus_add_driver+0xbe/0x1be driver_register+0x9a/0xd8 comedi_pci_driver_register+0x28/0x48 [comedi_pci] ? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci] do_one_initcall+0x72/0x183 do_init_module+0x5b/0x1e8 init_module_from_file+0x86/0xac __do_sys_finit_module+0x151/0x218 do_syscall_64+0x72/0xdb entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f72f50a0cb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9 RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000 R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8 </TASK> Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00 RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000 R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8 FS: ---truncated--- | ||||
CVE-2024-57989 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links In mt7925_change_vif_links() devm_kzalloc() may return NULL but this returned value is not checked. | ||||
CVE-2024-57932 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: gve: guard XDP xmit NDO on existence of xdp queues In GVE, dedicated XDP queues only exist when an XDP program is installed and the interface is up. As such, the NDO XDP XMIT callback should return early if either of these conditions are false. In the case of no loaded XDP program, priv->num_xdp_queues=0 which can cause a divide-by-zero error, and in the case of interface down, num_xdp_queues remains untouched to persist XDP queue count for the next interface up, but the TX pointer itself would be NULL. The XDP xmit callback also needs to synchronize with a device transitioning from open to close. This synchronization will happen via the GVE_PRIV_FLAGS_NAPI_ENABLED bit along with a synchronize_net() call, which waits for any RCU critical sections at call-time to complete. | ||||
CVE-2022-21546 | 1 Linux | 1 Linux Kernel | 2025-07-12 | N/A |
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix WRITE_SAME No Data Buffer crash In newer version of the SBC specs, we have a NDOB bit that indicates there is no data buffer that gets written out. If this bit is set using commands like "sg_write_same --ndob" we will crash in target_core_iblock/file's execute_write_same handlers when we go to access the se_cmd->t_data_sg because its NULL. This patch adds a check for the NDOB bit in the common WRITE SAME code because we don't support it. And, it adds a check for zero SG elements in each handler in case the initiator tries to send a normal WRITE SAME with no data buffer. | ||||
CVE-2022-49544 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: ipw2x00: Fix potential NULL dereference in libipw_xmit() crypt and crypt->ops could be null, so we need to checking null before dereference | ||||
CVE-2024-37820 | 1 Pingcap | 1 Tidb | 2025-07-12 | 5.4 Medium |
A nil pointer dereference in PingCAP TiDB v8.2.0-alpha-216-gfe5858b allows attackers to crash the application via expression.inferCollation. | ||||
CVE-2024-38592 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Init `ddp_comp` with devm_kcalloc() In the case where `conn_routes` is true we allocate an extra slot in the `ddp_comp` array but mtk_drm_crtc_create() never seemed to initialize it in the test case I ran. For me, this caused a later crash when we looped through the array in mtk_drm_crtc_mode_valid(). This showed up for me when I booted with `slub_debug=FZPUA` which poisons the memory initially. Without `slub_debug` I couldn't reproduce, presumably because the later code handles the value being NULL and in most cases (not guaranteed in all cases) the memory the allocator returned started out as 0. It really doesn't hurt to initialize the array with devm_kcalloc() since the array is small and the overhead of initting a handful of elements to 0 is small. In general initting memory to zero is a safer practice and usually it's suggested to only use the non-initting alloc functions if you really need to. Let's switch the function to use an allocation function that zeros the memory. For me, this avoids the crash. | ||||
CVE-2024-42329 | 1 Zabbix | 1 Zabbix | 2025-07-12 | 3.3 Low |
The webdriver for the Browser object expects an error object to be initialized when the webdriver_session_query function fails. But this function can fail for various reasons without an error description and then the wd->error will be NULL and trying to read from it will result in a crash. | ||||
CVE-2024-47496 | 1 Juniper Networks | 1 Junos Os | 2025-07-12 | 5.5 Medium |
A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a local, low-privileged attacker to cause a Denial-of-Service (DoS). When a specific command is executed, the pfe crashes. This will cause traffic forwarding to be interrupted until the system self-recovers. Repeated execution will create a sustained DoS condition. This issue only affects MX Series devices with Line cards MPC1-MPC9. This issue affects: Junos OS on MX Series: * All versions before 21.4R3-S9, * from 22.2 before 22.2R3-S5, * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S2, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R2. | ||||
CVE-2022-48795 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: parisc: Fix data TLB miss in sba_unmap_sg Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. | ||||
CVE-2021-47407 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.4 Medium |
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Handle SRCU initialization failure during page track init Check the return of init_srcu_struct(), which can fail due to OOM, when initializing the page track mechanism. Lack of checking leads to a NULL pointer deref found by a modified syzkaller. [Move the call towards the beginning of kvm_arch_init_vm. - Paolo] | ||||
CVE-2024-47501 | 1 Juniper Networks | 1 Junos Os | 2025-07-12 | 5.5 Medium |
A NULL Pointer Dereference vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX304, MX with MPC10/11/LC9600, and EX9200 with EX9200-15C allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). In a VPLS or Junos Fusion scenario, the execution of specific show commands will cause all FPCs hosting VPLS sessions or connecting to satellites to crash and restart. This issue affects Junos on MX304, MX with MPC10/11/LC9600 and EX9200 with EX9200-15C: * All version before 21.2R3-S1, * 21.3 versions before 21.3R3, * 21.4 versions before 21.4R2. | ||||
CVE-2024-0075 | 1 Nvidia | 1 Gpu Display Driver | 2025-07-12 | 6.1 Medium |
NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where a user may cause a NULL-pointer dereference by accessing passed parameters the validity of which has not been checked. A successful exploit of this vulnerability may lead to denial of service and limited information disclosure. | ||||
CVE-2024-6157 | 1 Abb | 1 Robotware | 2025-07-12 | 5.1 Medium |
An attacker who successfully exploited these vulnerabilities could cause the robot to stop. A vulnerability exists in the PROFINET stack included in the RobotWare versions listed below. This vulnerability arises under specific condition when specially crafted message is processed by the system. Below are reported vulnerabilities in the Robot Ware versions. * IRC5- RobotWare 6 < 6.15.06 except 6.10.10, and 6.13.07 | ||||
CVE-2024-57988 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error. | ||||
CVE-2022-49532 | 1 Linux | 1 Linux Kernel | 2025-07-12 | 4.1 Medium |
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218 |